scholarly journals Investigation of heat transfer in dimple-protrusion micro-channel heat sinks using copper oxide nano-additives

2021 ◽  
Vol 28 ◽  
pp. 101374 ◽  
Author(s):  
Muhammad Zia Ullah Khan ◽  
Bilal Akbar ◽  
Ramisha Sajjad ◽  
Umair Ahmed Rajput ◽  
Sanaullah Mastoi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Copper Oxide ◽  
Heat Sinks ◽  
Micro Channel ◽  
Nano Additives

Two-Phase Flow and Heat Transfer in Rectangular Micro-Channels

2003 ◽  
Author(s):  
Weilin Qu ◽  
Seok-Mann Yoon ◽  
Issam Mudawar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Flow Pattern ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Heat Sinks ◽  
Phase Flow ◽  
Micro Channel ◽  
Two Phase ◽  
Micro Channels

Knowledge of flow pattern and flow pattern transitions is essential to the development of reliable predictive tools for pressure drop and heat transfer in two-phase micro-channel heat sinks. In the present study, experiments were conducted with adiabatic nitrogen-water two-phase flow in a rectangular micro-channel having a 0.406 × 2.032 mm cross-section. Superficial velocities of nitrogen and water ranged from 0.08 to 81.92 m/s and 0.04 to 10.24 m/s, respectively. Flow patterns were first identified using high-speed video imaging, and still photos were then taken for representative patterns. Results reveal that the dominant flow patterns are slug and annular, with bubbly flow occurring only occasionally; stratified and churn flow were never observed. A flow pattern map was constructed and compared with previous maps and predictions of flow pattern transition models. Annual flow is identified as the dominant flow pattern for conditions relevant to two-phase micro-channel heat sinks, and forms the basis for development of a theoretical model for both pressure drop and heat transfer in micro-channels. Features unique to two-phase micro-channel flow, such as laminar liquid and gas flows, smooth liquid-gas interface, and strong entrainment and deposition effects are incorporated into the model. The model shows good agreement with experimental data for water-cooled heat sinks.

A review of flow and heat transfer behaviour of nanofluids in micro channel heat sinks

2018 ◽  
Vol 8 ◽  
pp. 477-493 ◽  
Author(s):  
Sunil Kumar ◽  
Anil Kumar ◽  
Alok Darshan Kothiyal ◽  
Mangal Singh Bisht
Keyword(s):  
Heat Transfer ◽  
Heat Sinks ◽  
Micro Channel ◽  
Flow And Heat Transfer

Two-Phase Flow and Heat Transfer in Rectangular Micro-Channels

2004 ◽  
Vol 126 (3) ◽  
pp. 288-300 ◽  
Author(s):  
Weilin Qu ◽  
Seok-Mann Yoon ◽  
Issam Mudawar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Flow Pattern ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Flow Patterns ◽  
Heat Sinks ◽  
Phase Flow ◽  
Micro Channel ◽  
Two Phase

Knowledge of flow pattern and flow pattern transitions is essential to the development of reliable predictive tools for pressure drop and heat transfer in two-phase micro-channel heat sinks. In the present study, experiments were conducted with adiabatic nitrogen-water two-phase flow in a rectangular micro-channel having a 0.406×2.032mm2 cross-section. Superficial velocities of nitrogen and water ranged from 0.08 to 81.92 m/s and 0.04 to 10.24 m/s, respectively. Flow patterns were first identified using high-speed video imaging, and still photos were then taken for representative patterns. Results reveal the dominant flow patterns are slug and annular, with bubbly flow occurring only occasionally; stratified and churn flow were never observed. A flow pattern map was constructed and compared with previous maps and predictions of flow pattern transition models. Features unique to two-phase micro-channel flow were identified and employed to validate key assumptions of an annular flow boiling model that was previously developed to predict pressure drop and heat transfer in two-phase micro-channel heat sinks. This earlier model was modified based on new findings from the adiabatic two-phase flow study. The modified model shows good agreement with experimental data for water-cooled heat sinks.

Numerical simulation of heat transfer in a micro channel heat sinks using nanofluids

2010 ◽  
Vol 47 (4) ◽  
pp. 479-490 ◽  
Author(s):  
E. Farsad ◽  
S. P. Abbasi ◽  
M. S. Zabihi ◽  
J. Sabbaghzadeh
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Sinks ◽  
Micro Channel

Transport Phenomena in Two-Phase Micro-Channel Heat Sinks

2002 ◽  
Author(s):  
Weilin Qu ◽  
Issam Mudawar
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Hydrodynamic Instability ◽  
Transport Phenomena ◽  
Flow Patterns ◽  
Heat Sinks ◽  
Micro Channel ◽  
Two Phase ◽  
Convective Boiling ◽  
Micro Channels

The design and reliable operation of a two-phase micro-channel heat sink require a fundamental understanding of the complex transport phenomena associated with convective boiling in small, parallel coolant passages. This understanding is the primary goal of this paper. This goal is realized by exploring the following aspects of boiling in micro-channels: hydrodynamic instability, two-phase flow patterns, pressure drop, and convective boiling heat transfer. High-speed photographic methods were used to determine dominant flow patterns and explore as well as characterize hydrodynamic instabilities. Two types of dynamic instability were identified, a severe pressure drop oscillation and a mild parallel channel instability, and a simple method is recommended to completely suppress the former. Predictions of three popular two-phase pressure drop models and correlations were compared to micro-channel water data, and only a separated flow (Lockhart-Martinelli) correlation based on the assumption of laminar flow in both phases gave acceptable predictions. Several popular heat transfer correlations were also examined and deemed unsuitable for micro-channel heat sinks because all these correlations are based on turbulent flow assumptions, and do not capture the unique features of micro-channel flow such as abrupt transition to slug flow, hydrodynamic instability, and high droplet entrainment in the annular regime. These findings point to the need for further study of boiling behavior and new predictive tools specifically tailored to micro-channel heat sinks.

Sign in / Sign up

Export Citation Format

Share Document