Towards net-zero emissions through the hybrid SMR-solar cogeneration plant equipped with modular PCM storage system for seawater desalination

Desalination ◽  
2022 ◽  
Vol 524 ◽  
pp. 115476
Author(s):  
Khashayar Sadeghi ◽  
Seyed Hadi Ghazaie ◽  
Riccardo Chebac ◽  
Ekaterina Sokolova ◽  
Evgeniy Fedorovich ◽  
...  
Author(s):  
Zhe Dong

Abstract To balance the intermittent renewable energy (IRE), it is necessary for nuclear power plants (NPPs) to operate flexibly. The flexibility can be given by cogeneration, where the main steam flow are used to drive several thermal loads such as the turbine and seawater desalination process. The electric power of a nuclear cogeneration plant (NCP) can be regulated through adjusting the excess steam flow to the cogeneration processes. Due to the fluctuation of IRE generation, the distribution of main steam to different thermal loads in a NCP varies with net demand frequently, which in turn results in a floating feedwater temperature, and further forms a disturbance to the operation of nuclear reactor. To mitigate the fluctuation of process variables caused by balancing IRE generation, it is necessary to study the coordinated control of flexible nuclear cogeneration plants. In this paper, the scheme of a NCP form by a 200MWth nuclear heating reactor NHR-200II based nuclear steam supply system (NSSS) driving a turbine and a seawater desalination process is first introduced. To balance the IRE generation, a plant coordinated control strategy is newly proposed. The feasibility of this control is verified through numerical simulation, which shows that this NCP can be adopted for balancing IRE.


Author(s):  
Jordan Thompson ◽  
Moncef Krarti

Abstract In this report, a resiliency analysis is carried out to assess the energy, economic, and power outage survivability benefits of efficient and Net-Zero communities. The analysis addresses the appropriate steps to designing an energy-efficient and Net-Zero community using Phoenix, Arizona as a primary location for weather and utility inputs. A baseline home is established using International Energy Conservation Code (IECC) 2018 code requirements. Three occupancy levels are evaluated in BEopt to provide diversity in the community’s building stock. The loads from the baseline, energy-efficient optimum, and Net-Zero optimum single-family homes are utilized to determine energy use profiles for various residential community types using occupancy statistics for Phoenix. Then, REopt is used to determine the photovoltaic (PV) and battery storage system sizes necessary for the community to survive a 72-hour power outage. The baseline community requires a 544-kW PV system and 375-kW/1,564 kWh battery storage system to keep all electrical loads online during a 72-hour power outage. The energy-efficient community requires a 291-kW PV system and a 202-kW/820 kWh battery storage system while the Net-Zero community requires a 291-kW PV system and a 191-kW/880 kWh battery storage system. In this study, the economic analysis indicates that it is 43% more cost-effective to install a shared PV plus storage system than to install individual PV plus storage systems in an energy-efficient community. After analyzing the system sizes and costs required to survive various outage durations, it is found that only a 4% difference in net present cost exists between a system sized for a 24-hour outage and a 144-hour outage. In the event of a pandemic or an event that causes a community-wide lockdown, the energy-efficient community would only survive 6 hours out of a 72-hour power outage during a time where plug loads are increased by 50% due to added laptops, monitors, and other office electronics. Finally, a climate sensitivity analysis is conducted for efficient communities in Naperville, Illinois and Augusta, Maine. The analysis suggests that for a 72-hour power outage starting on the peak demand day and time of the year, the cost of resiliency is higher in climates with more heating and cooling needs as HVAC is consistently the largest load in a residential building.


1994 ◽  
Vol 116 (1) ◽  
pp. 56-64 ◽  
Author(s):  
K. Ito ◽  
T. Shiba ◽  
R. Yokoyama

An operational problem is discussed for a gas turbine cogeneration plant in combination with a heat pump/thermal storage system that utilizes time-of-use pricing of the electrical utility. An optimal planning method is presented by which the operational policy of constituent equipment is determined so as to minimize the daily operational cost. An algorithm is proposed to solve this optimization problem efficiently by combining the dynamic programming method with the mixed-integer programming one. A case study is carried out to investigate the effect of introducing a heat pump system into a cogeneration plant.


Sign in / Sign up

Export Citation Format

Share Document