Global attempts to increase generation of clean and reproducible natural energy have greatly contributed to the progress of solar, wind, biomass, and geothermal energy generation. To meet the goal set by the Renewable Portfolio Standards (RPS) in the United States, it is advisable for several of the coastal states to tap into the least explored resource: ocean-wave energy. There are many advantages to ocean-wave energy generation. First, the energy per unit area is 20 to 30 times larger compared with solar and five to ten times larger when compared to wind energy. Second, waves are more easily predicted than wind. Currently, there are several challenges with capturing ocean energy: With respect to the environment, noise pollution and effects on marine life need to be taken into consideration; with respect to design, ocean-wave power generators need to withstand large waves due to hurricanes and be designed to lessen visual pollution.
There are various methods and devices used to capture ocean wave energy. Point absorbers, such as PowerBuoy, can harness vertical or heaving motion into electricity while attenuators like Pelamis use the induced movement of its joints from the incoming waves. Unfortunately, many have few parameters that can be varied to optimize power generation and or suffer from the various challenges mentioned above. The gyroscopic ocean wave energy converter harnesses the rocking or pitching motion induced by the ocean waves and converts it into rotary motion that is then fed to a generator. Furthermore, it is a fully enclosed floating device that has several parameters that can be varied to optimize power output. Previous work has demonstrated the viability of such a device, but the theoretical modeling of these converters is still in its infancy compared to that of other ocean wave energy converters. The objective of the research presented is to fully understand the mechanisms of power generation in the gyroscopic ocean wave energy converter. Using the moving frame method, a mathematical model of the device is developed. The nonlinear equations of motion are derived through the use of this novel method and then solved numerically. The results are then used to optimize the system and identify key parameters and their effect on the output power generated. Additionally, the resulting equations serve as a tool for identifying an appropriate control strategy for the system. Finally, a scale model of a gyroscopic ocean wave energy converter is developed to validate the equations of motion that have been derived.
Numerical simulation of a novel ocean wave energy converter
