scholarly journals Hydrogen absorption rate and hydrogen diffusion in a ferritic steel coated with a micro- or nanostructured ZnNi coating

2021 ◽  
pp. 107169
Author(s):  
Masoud Moshtaghi ◽  
Mahdieh Safyari
Keyword(s):  
Hydrogen Absorption ◽  
Ferritic Steel ◽  
Absorption Rate ◽  
Hydrogen Diffusion

Effects of Electroless Nickel on Hydrogen Absorption Properties of Zr-V-Fe Powders

2015 ◽  
Vol 815 ◽  
pp. 268-275
Author(s):  
Hang Cui ◽  
Jian Dong Cui ◽  
Yao Hua Xu ◽  
Hao Zhou ◽  
Jun Du
Keyword(s):  
Crystalline Phase ◽  
Hydrogen Absorption ◽  
Absorption Rate ◽  
Dynamic Method ◽  
Hydrogen Diffusion ◽  
Electroless Nickel ◽  
Absorption Kinetics ◽  
Absorption Properties ◽  
Absorption Performance ◽  
Kinetics Of

Nickel coated Zr-V-Fe non-evaporable getter (NEG) powders were prepared using electroless plating. The microstructure and composition of the Ni-coated Zr-V-Fe powders were analyzed by XRD, SEM and EDS. The hydrogen absorption performance of Ni-coated Zr-V-Fe powders and as-prepared powders were analyzed by dynamic method after an activation at 300°C for 2 hours. The hydrogen absorption performance of Ni-coated Zr-V-Fe powders and as-prepared powders at 100°C, 200°C, 300°C, 400°C, and 500°C were also analyzed. The results indicated that Ni existed as crystalline phase. The Ni coating played an important role as a catalyst which favored the dissociation of hydrogen on surface and Ni lowers the hydrogen diffusion energy for the Zr-V-Fe powders. The hydrogen absorption kinetics of Ni-coated Zr-V-Fe powders was improved in comparison with that of the as-prepared powders, and a relatively higher absorption rate was exhibited.

scholarly journals Hydrogen Diffusion Coefficient, Hydrogen Solution Coefficient and Hydrogen Permeability of Nb-TiNi Eutectic Alloy

2010 ◽  
Vol 638-642 ◽  
pp. 1131-1136
Author(s):  
Wei Liang Wang ◽  
Kazuhiro Ishikawa ◽  
Kiyoshi Aoki
Keyword(s):  
Diffusion Coefficient ◽  
Hydrogen Absorption ◽  
Hydrogen Diffusion ◽  
Hydrogen Permeability ◽  
K Value ◽  
Hydrogen Flow ◽  
Hydrogen Diffusion Coefficient ◽  
High K ◽  
Pressure Region ◽  
The Difference

In general, hydrogen permeabilityΦ of the alloy membrane is expressed as the product of the hydrogen diffusion coefficient D and the hydrogen solution coefficient K. Therefore, to improve the hydrogen permeability efficiently, the values of K and D should be separately considered. In the present study, hydrogen absorption and permeation behaviors of the Nb19Ti40Ni41 alloy consisting of the eutectic phase are investigated by measuring pressure-composition-isotherm (PCI) and by the hydrogen flow method and compared with those of palladium. The hydrogen absorption in the Nb19Ti40Ni41 alloy does not obey the Sieverts’ law in the pressure region of 0-1.0MPa at 523K, but it shows linear relationship between the difference in the square root of hydrogen pressure and hydrogen content between 0.1 and 0.4MPa. Although the value of D for the Nb19Ti40Ni41 alloy is considerably lower than that of palladium, its high K value enhances the hydrogen permeability Φ. It is suggested that the enhancement of D by microstructural control for Nb19Ti40Ni41 alloy is effective for improvement of Φ.

scholarly journals Preparation of Mg2FeH6Nanoparticles for Hydrogen Storage Properties

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
N. A. Niaz ◽  
I. Ahmad ◽  
N. R. Khalid ◽  
E. Ahmed ◽  
S. M. Abbas ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Hydrogen Absorption ◽  
Hydrogen Pressure ◽  
Absorption Rate ◽  
Desorption Kinetics ◽  
Prepared Compound ◽  
Hydrogen Storage Properties ◽  
Storage Properties ◽  
Effective Hydrogen ◽  
Type Apparatus

Magnesium (Mg) and iron (Fe) nanoparticles are prepared by thermal decomposition of bipyridyl complexes of metals. These prepared Mg-Fe (2 : 1) nanoparticles are hydrogenated under 4 MPa hydrogen pressure and 673 K for 48 hours to achieve Mg2FeH6. Their structural analysis was assessed by applying manifold techniques. The hydrogen storage properties of prepared compound were measured by Sieverts type apparatus. The desorption kinetics were measured by high pressure thermal desorption spectrometer (HP-TDS). More than 5 wt% hydrogen released was obtained by the Mg2FeH6within 5 min, and during rehydrogenation very effective hydrogen absorption rate was observed by the compound.

Effects of surface modification by ion irradiation on the electrochemical hydrogen absorption rate of Pd

2005 ◽  
Vol 404-406 ◽  
pp. 288-292 ◽  
Author(s):  
H. Abe ◽  
R. Morimoto ◽  
F. Satoh ◽  
Y. Azuma ◽  
H. Uchida
Keyword(s):  
Surface Modification ◽  
Hydrogen Absorption ◽  
Absorption Rate ◽  
Ion Irradiation
Sign in / Sign up

Export Citation Format

Share Document