Anodic-potential-tuned bioanode for efficient gaseous toluene removal in an MFC

2021 ◽  
pp. 137992
Author(s):  
Juping You ◽  
Han Chen ◽  
Liangliang Xu ◽  
Jingkai Zhao ◽  
Jiexu Ye ◽  
...  
Keyword(s):  
Anodic Potential ◽  
Toluene Removal ◽  
Gaseous Toluene

The roles of wavelength in the gaseous toluene removal with OH from UV activated Fenton reagent

Chemosphere ◽  
2021 ◽  
Vol 275 ◽  
pp. 129998
Author(s):  
Weiwei Guo ◽  
Tianqi Li ◽  
Qianru Chen ◽  
Junfeng Wan ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Fenton Reagent ◽  
Toluene Removal ◽  
Gaseous Toluene

scholarly journals Effect of Synthesized Conditions of Cu-K-OMS-2 on Toluene Oxidation Performance

2019 ◽  
pp. 83-95
Author(s):  
Chatkamol Kaewbuddee ◽  
Narong Chanlek ◽  
Kitirote Wantala
Keyword(s):  
Ageing Time ◽  
Hydrothermal Process ◽  
Ageing Temperature ◽  
Quadratic Model ◽  
Significant Variable ◽  
Synthesis Conditions ◽  
Toluene Removal ◽  
Temperature Ageing ◽  
Cu Dopant ◽  
Gaseous Toluene

The objective of this study was to optimize synthesis conditions for the Cu-K-OMS-2 hydrothermal process. The effects of ageing temperature, ageing time and amount of copper (Cu) dopant were considered via using the Box-Behnken design (BBD) method to characterize the conditions for gaseous toluene degradation. In the models studied, the independent variables were ageing temperature (55-145ºC), ageing time (6-18 h) and amount of Cu dopant (2-6% mole). The quadratic model fitted very well with the experimental data (15 runs), which showed a higher value of R2 (0.98) and adjusted R2 (0.95), confirming that the model can explain the results successfully. Ageing temperature was found to be the only significant variable for the Cu-K-OMS-2 transformation phase, with CuO and the bixbyite phase appearing as the highest ageing temperature condition. Furthermore, the effects of ageing temperature, ageing time and amount of Cu dopant on the Cu3+/Cu2+ mole ratio were also investigated. Ageing temperature and amount of Cu dopant displayed a significant effect on both toluene removal and the Cu3+/Cu2+ mole ratio. On the other hand, ageing time was not significant for both responses. The high Cu3+/Cu2+ mole ratio led to enhancement of toluene removal. The optimized conditions for Cu-K-OMS-2 synthesis were determined as 120ºC of ageing temperature, 6 h of ageing time and 6% by mole of Cu on K-OMS-2, which removed 80% of toluene at a reaction temperature of 180ºC.

Research on Decomposition of Toluene Using Adsorption Combined with Non-Thermal Plasma

2011 ◽  
Vol 403-408 ◽  
pp. 3207-3211
Author(s):  
Xiao Qing Dang ◽  
Jia Yu Huang ◽  
Xiao Liu ◽  
Tao Wu ◽  
Lu Kang
Keyword(s):  
Removal Efficiency ◽  
Discharge Plasma ◽  
Synergetic Effect ◽  
Systematic Investigation ◽  
Dielectric Barrier Discharge Plasma ◽  
Toluene Removal ◽  
Different Types ◽  
Barrier Discharge Plasma ◽  
Non Thermal Plasma ◽  
Gaseous Toluene

The paper made a research on synergetic effect of gaseous toluene decomposition using dielectric barrier discharge plasma and adsorption. A systematic investigation on toluene removal efficiency and ozone byproduct generation was done using different types of fillers. The mixed fillers were found to be promising as ideal fillers. In terms of toluene removal efficiency, mixed fillers of zeolite and ceramic rings was the highest, around 97%, next is zeolite, then followed by ceramic rings and no filler-packed. Among the tested fillers, mixed fillers showed the least amount of ozone generation. For practical use of mixed fillers, it’s preferable to operate at 18kV than 20 kV, avoiding forming more undesirable O3byproduct on achieving the same toluene removal effect.

Mn decorated UIO-66 catalyst for gaseous toluene removal: Synergistic effect of enhanced hydroxyl from H2O2

Fuel ◽  
2022 ◽  
Vol 309 ◽  
pp. 122229
Author(s):  
Mengchang Zhou ◽  
Changsong Zhou ◽  
Dong Chen ◽  
Hao Wu ◽  
Zhen Zhang ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Toluene Removal ◽  
Gaseous Toluene
Sign in / Sign up

Export Citation Format

Share Document