Investigation of a combined molten carbonate fuel cell, gas turbine and Stirling engine combined cooling heating and power (CCHP) process by exergy cost sensitivity analysis

2018 ◽  
Vol 165 ◽  
pp. 291-303 ◽  
Author(s):  
Hojat Ansarinasab ◽  
Mehdi Mehrpooya
Keyword(s):  
Sensitivity Analysis ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Stirling Engine ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Combined Cooling ◽  
Carbonate Fuel Cell ◽  
Cost Sensitivity

Performance Evaluation of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Oxy-Combustion Carbon Capture

2017 ◽  
Author(s):  
Ji Ho Ahn ◽  
Tong Seop Kim
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Design Parameters ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Carbonate Fuel Cell

Owing to the increasing consumption of fossil fuels and emission of greenhouse gases, interests in highly efficient and low carbon emitting power systems are growing fast. Several research groups have been suggesting advanced systems based on fuel cells and have also been applying carbon capture and storage technology to satisfy the demand for clean energy. In this study, the performance of a hybrid system, which is a combination of a molten carbonate fuel cell (MCFC) with oxy-combustion carbon capture and an indirectly fired micro gas turbine (MGT) was predicted. A 2.5MW MCFC system that is used in commercial applications was used as the reference system so that the results of the study could be applicable to practical situations. The ambient pressure type hybrid system was modeled by referring to the design parameters of an MGT that is currently being developed. A semi-closed type design characterized by flow recirculation was adopted for this hybrid system. A part of the recirculating gas is converted into liquefied carbon dioxide and captured for storage at the carbon separation unit. Almost 100% carbon dioxide capture is possible with this system. In these systems, the output power of the fuel cell is larger than in the normal hybrid system without carbon capture because the partial pressure of carbon dioxide increases. The increased cell power partially compensates for the power loss due to the carbon capture and MGT power reduction. The dependence of net system efficiency of the oxy-hybrid on compressor pressure ratio is marginal, especially beyond an optimal value.

Performance Evaluation of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Oxy-Combustion Carbon Capture

2017 ◽  
Vol 140 (4) ◽  
Author(s):  
Ji Ho Ahn ◽  
Tong Seop Kim
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Design Parameters ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Carbonate Fuel Cell

Owing to the increasing consumption of fossil fuels and emission of greenhouse gases, interests in highly efficient and low carbon emitting power systems are growing fast. Several research groups have been suggesting advanced systems based on fuel cells and have also been applying carbon capture and storage technology to satisfy the demand for clean energy. In this study, the performance of a hybrid system, which is a combination of a molten carbonate fuel cell (MCFC) with oxy-combustion carbon capture and an indirectly fired micro gas turbine (MGT), was predicted. A 2.5 MW MCFC system that is used in commercial applications was used as the reference system so that the results of the study could be applied to practical situations. The ambient pressure type hybrid system was modeled by referring to the design parameters of an MGT that is currently being developed. A semi-closed type design characterized by flow recirculation was adopted for this hybrid system. A part of the recirculating gas is converted into liquefied carbon dioxide and captured for storage at the carbon separation unit (CSU). Almost 100% carbon dioxide capture is possible with this system. In these systems, the output power of the fuel cell is larger than in the normal hybrid system without carbon capture because the partial pressure of carbon dioxide increases. The increased cell power partially compensates for the power loss due to the carbon capture and MGT power reduction. The dependence of net system efficiency of the oxy-hybrid on compressor pressure ratio is marginal, especially beyond an optimal value.

Sign in / Sign up

Export Citation Format

Share Document