Axial load-capacity of rectangular cement stabilized rammed earth column

2015 ◽  
Vol 99 ◽  
pp. 402-412 ◽  
Author(s):  
Deb Dulal Tripura ◽  
Konjengbam Darunkumar Singh
Keyword(s):  
Axial Load ◽  
Load Capacity ◽  
Rammed Earth ◽  
Axial Load Capacity

Axial Load-Capacity of Bamboo-Steel Reinforced Cement Stabilised Rammed Earth Columns

2018 ◽  
Vol 29 (1) ◽  
pp. 133-143 ◽  
Author(s):  
Deb Dulal Tripura ◽  
Konjengbam Darunkumar Singh
Keyword(s):  
Axial Load ◽  
Load Capacity ◽  
Rammed Earth ◽  
Axial Load Capacity ◽  
Reinforced Cement

Axial load capacity of cylindrical shells with local geometric defects

1991 ◽  
Vol 31 (2) ◽  
pp. 104-110 ◽  
Author(s):  
S. Krishnakumar ◽  
C. G. Foster
Keyword(s):  
Axial Load ◽  
Load Capacity ◽  
Cylindrical Shells ◽  
Axial Load Capacity

EFFECT OF ASPECT RATIO ON THE BEHAVIOR OF GFRP-RC CIRCULAR COLUMNS UNDER SIMULATED SEISMIC LOADING

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Amr Elsayed Mohammed Abdallah ◽  
Ehab Fathy El-Salakawy
Keyword(s):  
Aspect Ratio ◽  
Axial Load ◽  
Load Capacity ◽  
Load Level ◽  
Experimental Results ◽  
Rc Columns ◽  
Drift Capacity ◽  
Glass Fiber Reinforced ◽  
Axial Load Capacity ◽  
Code Provisions

The mechanical and physical properties of glass fiber-reinforced polymer (GFRP) reinforcement are different from steel, which requires independent code provisions for GFRP-reinforced concrete (RC) members. The currently available code provisions for GFRP-RC members still need more research evidence to be inclusive. For example, the available provisions for confinement reinforcement of FRP-RC columns do not consider the effects of column aspect ratio, which is not yet supported by any available research data. In this study, two full-scale spirally reinforced GFRP-RC circular columns were constructed and tested under concurrent seismic and axial loads. Both specimens had an aspect ratio (shear span-to-diameter ratio) of 7.0, while other two specimens with an aspect ratio of 5.0, from a previous stage of this study, were included for comparison purposes. For each aspect ratio, each specimen was loaded under one of two levels of axial load; 20 or 30% of the axial load capacity of the column section. All test specimens had a 35 MPa concrete compressive strength, 350-mm diameter, 85-mm spiral pitch and 1.2% longitudinal reinforcement ratio. The experimental results were analyzed in terms of hysteretic response, drift capacity and inelastic deformability hinge length. Based on the experimental results, it can be concluded that the aspect ratio affects the magnitude of secondary moments and inelastic deformability hinge length. In addition, the aspect ratio may affect drift capacity of GFRP-RC columns, depending on axial load level.

Magnetic Field and Specific Axial Load Capacity of Hybrid Magnetic Bearing

2013 ◽  
Vol 49 (8) ◽  
pp. 4911-4917 ◽  
Author(s):  
Haoze Wang ◽  
Kun Liu ◽  
Peng Ao
Keyword(s):  
Magnetic Field ◽  
Axial Load ◽  
Load Capacity ◽  
Magnetic Bearing ◽  
Axial Load Capacity

Behaviour of Composite Column of Cold-Formed Steel Section with Web-Stiffener Integrated with Ferrocement Jacket

2015 ◽  
Vol 752-753 ◽  
pp. 533-538
Author(s):  
Khaled Alenezi ◽  
Mahmood Md Tahir ◽  
Talal Alhajri ◽  
Mohamad Ragae
Keyword(s):  
Compressive Strength ◽  
Axial Load ◽  
Load Capacity ◽  
High Ratio ◽  
Column Height ◽  
Composite Column ◽  
Composite Columns ◽  
Axial Load Capacity ◽  
Strength Capacity ◽  
Cold Formed Steel

Cold-formed steel (CFS) is known as slender or class 4 section due to high ratio of web-to-thickness ratio. The compressive strength of this type of section is usually very low as it tends to fail due to distortion and warping before reaching the actual compressive strength. The aim of this study is to determine the ultimate capacity of build-up lipped CFS assembled with ferrocement jacket where web-stiffener is provided as the proposed composite column (CFFCC) is under axial compression load. Nine specimens of composite columns were prepared and tested. The main parameters varied in the CFFCC columns are column height, cold-formed steel thickness and influence of ferrocement jacket and web-stiffener. There are three different heights of the CFFCC composite column namely 2000mm, 3000mm and 4000mm used in this study. All CFFCC columns were tested under axial load where a thick steel plate is used to evenly distribute the applied load. The results show the effect of providing both the ferrocement jacket to increase the confinement effect and the web stiffener to provide sufficient lateral support to the column web. A significant increase in both the strength and the ductility of the specimens under axial loading has been recorded. The strength capacity of CFFCC has been improved by about 178% greater than that of bare steel column. Also it is found that, axial load capacity of CFS-ferrocement jacket composite columns (CFFCC) were increased with the increase in thickness of CFS. The use of web-stiffener has improved the axial load capacity of the column but not that significant.

Sign in / Sign up

Export Citation Format

Share Document