Life prediction of oxide dispersion-strengthened platinum–rhodium alloy subjected to high-temperature bending fatigue under axial stress

2020 ◽  
Vol 140 ◽  
pp. 105808
Author(s):  
A. Niwa ◽  
Y. Akita ◽  
J. Arakawa ◽  
H. Akebono ◽  
A. Sugeta
2017 ◽  
Vol 493 ◽  
pp. 180-188 ◽  
Author(s):  
N.H. Oono ◽  
S. Ukai ◽  
S. Hayashi ◽  
S. Ohtsuka ◽  
T. Kaito ◽  
...  

2020 ◽  
Vol 21 (1) ◽  
pp. 35
Author(s):  
Marzuki Silalahi ◽  
Bernadus Bandriyana ◽  
Arbi Dimyati ◽  
Bambang Sugeng ◽  
Syahfandi Ahda ◽  
...  

Microstructure and phase distribution of innovative Oxide Dispersion Strengthened (ODS) steel based on Fe-Cr-ZrO2 particularly for application at high temperature reactor with variation of Cr content was analysed. The alloy was synthesized with Cr composition variation of  15, 20 and 25 wt.% Cr, while zirconia dispersoid kept constant at 0.50 wt.%. The samples was synthesized by mechanical alloying comprising of high energy milling for 3 hours followed by vibrated compression with iso-static load at 20 ton. The final consolidation was performed via sintering process for 4 minutes using the Arc Plasma Sintering (APS) technique, a new method developed in BATAN especially for synthesizing high temperature materials. The samples were then characterized by means of scanning electron microscopy (SEM) with energy dispersed X-ray (EDX) analysis capability and X-ray diffraction. The mechanical property of hardness was measured using standard Vickers micro hardness tester to confirmed the microstructure analysis.  The results show that the microstructure of the ODS alloy samples in all variation of Cr content consists generally of cubic Fe-Cr matrix phase with small of porosity and  Zirconia particles distributed homogenously in and around the matrix grains. The achievable hardness was between 142 and 184 HVN dependent consistently on Cr content in which Cr element may cause grain refining that in turn increase the hardness.


Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3343 ◽  
Author(s):  
Hyosim Kim ◽  
Tianyao Wang ◽  
Jonathan G. Gigax ◽  
Shigeharu Ukai ◽  
Frank A. Garner ◽  
...  

As one candidate alloy for future Generation IV and fusion reactors, a dual-phase 12Cr oxide-dispersion-strengthened (ODS) alloy was developed for high temperature strength and creep resistance and has shown good void swelling resistance under high damage self-ion irradiation at high temperature. However, the effect of helium and its combination with radiation damage on oxide dispersoid stability needs to be investigated. In this study, 120 keV energy helium was preloaded into specimens at doses of 1 × 1015 and 1 × 1016 ions/cm2 at room temperature, and 3.5 MeV Fe self-ions were sequentially implanted to reach 100 peak displacement-per-atom at 475 °C. He implantation alone in the control sample did not affect the dispersoid morphology. After Fe ion irradiation, a dramatic increase in density of coherent oxide dispersoids was observed at low He dose, but no such increase was observed at high He dose. The study suggests that helium bubbles act as sinks for nucleation of coherent oxide dispersoids, but dispersoid growth may become difficult if too many sinks are introduced, suggesting that a critical mass of trapping is required for stable dispersoid growth.


Sign in / Sign up

Export Citation Format

Share Document