Heat and mass transfer in liquid-to-liquid membrane contactors: Design approach and model applicability

Author(s):  
Jason Woods ◽  
John Pellegrino
Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1580
Author(s):  
Chii-Dong Ho ◽  
Hsuan Chang ◽  
Yih-Hang Chen ◽  
Jun-Wei Lim ◽  
Jing-Wei Liou

A new design of gas absorption that winds the permeable membrane onto an inner concentric tube to conduct a concentric circular gas–liquid membrane module has been studied theoretically in the fully developed region. An analytical formulation, referred to as conjugated Graetz problems, is developed to predict the concentration distribution and Sherwood numbers for the absorbent fluid flowing in the shell side and CO2/N2 gas mixture flowing in the tube side under various designs and operating parameters. The analytical solutions to the CO2 absorption efficiency were developed by using a two-dimensional mathematical modeling, and the resultant conjugated partial differential equations were solved analytically using the method of separation variables and eigen-function expansion in terms of power series. The predictions of CO2 absorption rate by using Monoethanolamide (MEA) solution in concentric circular membrane contactors under both concurrent- and countercurrent-flow operations are developed theoretically and confirmed with the experimental results. Consistency in both a good qualitative and quantitative sense is achieved between the theoretical predictions and experimental results. The advantage of the present mathematical treatment provides a concise expression for the chemical absorption of CO2 by MEA solution to calculate the absorption rate, absorption efficiency, and average Sherwood number. The concentration profiles with the mass-transfer Graetz number, inlet CO2 concentration, and both gas feed and absorbent flow rates are also emphasized. Both theoretical predictions and experimental results show that the device performance of the countercurrent-flow operation is better than that of the concurrent-flow device operation. The availability of such simplified expressions of the absorption rate and averaged Sherwood as developed directly from the analytical solutions is the value of the present study.


2011 ◽  
Vol 133 (9) ◽  
Author(s):  
Li-Zhi Zhang

Hollow fiber membrane contactors are used in air dehumidification. The benefit of this technology is that the liquid desiccant is not in a direct contact with the process air; therefore, the problem of liquid droplets crossover is prevented. The equations governing the heat and moisture transfer from the air to the liquid, through the membranes, are described. An analytical solution is obtained for the dimensionless differential equations, with which the dehumidification effectiveness could be estimated by simple algebraic calculations. It provides a convenient yet accurate tool for the component design and system optimization. The model is validated by experiments. The effects of varying operating conditions on system performance are investigated. It is found that the total number of transfer units for sensible heat and the overall Lewis number are the most dominant parameters influencing heat and mass transfer.


2020 ◽  
Vol 869 ◽  
pp. 321-335
Author(s):  
Margarita I. Kostyanaya ◽  
Eduard G. Novitskii ◽  
Stepan D. Bazhenov

The operating efficiency of asymmetric porous and composite membranes with a thin non-porous selective layer was compared in the processes of CO2 absorption and desorption in gas-liquid membrane contactors using aqueous solutions of monoethanolamine (MEA) with low concentration (<14 %). Composite membranes were prepared by direct deposition of poly (1-trimethylsilyl-1-propyne) (PTMSP) in a hollow fiber membrane module. The effects of gas flow rate and MEA solvent linear velocity on the CO2 mass transfer were evaluated. Porous membranes were shown to be more effective in the process of CO2 absorption, because they allow to remove more than 90 % of CO2 from the gas mixture during one pass of the solvent through the contactor. Composite membranes were more promising for CO2 desorption, since they provide half as much of the solvent vapor losses with comparable desorbed CO2 fluxes (0.12-(STP)/(m2·h)). The contributions of membrane and liquid phase to the overall mass transfer resistance during the CO2 absorption process were estimated. It was demonstrated that deposition of a thin selective layer from a highly permeable PTMSP with a thickness of only 3 μm increases the membrane contribution to the total mass transfer resistance from 10-20 % to 60-80 %.


Sign in / Sign up

Export Citation Format

Share Document