Effect of phosphoric acid-doped polybenzimidazole membranes on the performance of H+-ion concentration cell

2021 ◽  
Vol 46 (5) ◽  
pp. 4354-4364
Author(s):  
Ting Qu ◽  
Jixiang Hu ◽  
Qiang Tan ◽  
Yan Liu ◽  
Yuanzhen Chen ◽  
...  
2000 ◽  
Vol 63 (8) ◽  
pp. 1087-1092 ◽  
Author(s):  
G. KERE KEMP ◽  
M. L. ALDRICH ◽  
A. L. WALDROUP

An acidified sodium chlorite (ASC) solution was investigated for its antimicrobial effects on broiler carcasses processed under conditions similar to those used in U.S. commercial poultry facilities. Of particular interest was the ability of the ASC solution to reduce natural bioburden in a prechill procedure. A number of parameters such as pretreatment washing of carcasses with water (no wash versus water wash), ASC concentration (500, 850, and 1,200 ppm), method of application (spray versus dip), and method of acid activation (phosphoric acid versus citric acid) were explored to evaluate disinfection conditions. ASC dip solutions (18.9 liters) were freshly prepared for groups of five prechill eviscerated carcasses per treatment (n = 10 carcasses). ASC treatment was shown to be an effective method for significantly reducing naturally occurring microbial contamination on carcasses. Reductions following immersion dipping were demonstrated at all disinfectant concentrations for total aerobes (82.9 to 90.7%), Escherichia coli (99.4 to 99.6%), and total coliforms (86.1 to 98.5%). Additionally, testing showed that ASC solutions maintained stable pH and minimal chlorite ion concentration deviations throughout each treatment. The results of the parameter evaluations indicated that maximal antimicrobial activity was achieved in carcasses that were prewashed and then exposed to a 5-s dip in a solution containing phosphoric acid- or citric acid-activated ASC. At 1,200 ppm ASC, a mild but transitory whitening of the skin was noted on dipped carcasses. The results support the methods currently approved by the U.S. Department of Agriculture for the use of ASC solutions as a prechill antimicrobial intervention in U.S. poultry processing plants.


1984 ◽  
Vol 44 ◽  
Author(s):  
John B. Pickett

AbstractCylindrical uranium slugs are used as irradiation targets in the production reactors at the Savannah River Plant. These slugs are first chemically etched, nickel plated, encased in aluminum, inspected, and individually pressure tested. An improved process was developed to recover the uranium from the acidic etching streams by controlling pH and the PO4 to U ratio so that the precipitation of the uranium as hydrogen uranyl phosphate was maximized. Bench scale tests demonstrated that the recovery of uranium could be increased to greater than 99.9% (vs. the current level of about 95% recovery). The recommended changes involved the addition of process effluent “hold” tanks. The addition of the various process streams to the neutralization/precipitation tank could therefore be controlled to maintain a consistent ratio of uranyl nitrate and phosphoric acid. Also, it was determined that a strong caustic solution (resulting from the dissolution of rejected aluminum slugs) could be utilized to neutralize the nitric and phosphoric acid solutions. The buffering action of the aluminum in the “caustic recovery solution” would reduce the sensitivity of the hydrogen uranyl phosphate precipitation to the phosphate ion concentration.


Carbon ◽  
1983 ◽  
Vol 21 (2) ◽  
pp. i
Author(s):  
Edward Tolles ◽  
Robert Stallings ◽  
Charles E Miller

2015 ◽  
Vol 1094 ◽  
pp. 194-198
Author(s):  
Peng Yun Song ◽  
Rong Qun Deng ◽  
Dan Zhu

It is easy to form the crystallization fouling of sodium (potassium) fluorosilicate during the wet-process phosphoric acid (WPA) production, which seriously affects the continuity of production. The crystallization fouling deposition model is selected to establish a model to simulate sodium (potassium) fluorosilicate fouling deposition process and to predict the deposition rate of fouling in the pipe in this paper. The predicted results by the model are on the whole consistent with the existed experimental data. The factors, such as fluid velocity, temperature and ion concentration that affect fouling deposition rate were discussed, it was found that the fouling deposition rate increases with the increasing of fluid velocity, decreases with the increasing of temperature, and the greater the ion concentration, the greater the deposition rate.


Sign in / Sign up

Export Citation Format

Share Document