A simple approach to the suppression of the Gibbs phenomenon in diffractive numerical calculations

Optik ◽  
2021 ◽  
Vol 247 ◽  
pp. 167921
Author(s):  
Francisco Jose Torcal-Milla
2010 ◽  
Vol 670 ◽  
pp. 275-283 ◽  
Author(s):  
Kunihisa Tashiro ◽  
Akihito Matsuoka ◽  
Hiroyuki Wakiwaka

This paper presents a novel approach for the design of square coil system, through considerations of a conventional square coil system. This simple approach allows us to design a coil system which contains a greater number of coils. From this design method, we introduce a new structure system of same-sized square coils, Simple-Box-9. The constant coil spacing is a fourth-part of the side length of the coil, and the number of windings is 2/1/1/1/1/1/1/1/2. From numerical calculations and experiments, it is shown that Simple-Box-9 can achieve the best uniformity compared with conventional square coil systems.


Author(s):  
E. A. Kenik ◽  
J. Bentley

Cliff and Lorimer (1) have proposed a simple approach to thin foil x-ray analy sis based on the ratio of x-ray peak intensities. However, there are several experimental pitfalls which must be recognized in obtaining the desired x-ray intensities. Undesirable x-ray induced fluorescence of the specimen can result from various mechanisms and leads to x-ray intensities not characteristic of electron excitation and further results in incorrect intensity ratios.In measuring the x-ray intensity ratio for NiAl as a function of foil thickness, Zaluzec and Fraser (2) found the ratio was not constant for thicknesses where absorption could be neglected. They demonstrated that this effect originated from x-ray induced fluorescence by blocking the beam with lead foil. The primary x-rays arise in the illumination system and result in varying intensity ratios and a finite x-ray spectrum even when the specimen is not intercepting the electron beam, an ‘in-hole’ spectrum. We have developed a second technique for detecting x-ray induced fluorescence based on the magnitude of the ‘in-hole’ spectrum with different filament emission currents and condenser apertures.


2004 ◽  
Vol 49 (4) ◽  
pp. 401-403
Author(s):  
Richard B. Makover

1988 ◽  
Vol 49 (C8) ◽  
pp. C8-1451-C8-1452 ◽  
Author(s):  
K. Kopinga ◽  
J. Emmen ◽  
G. C. de Vries ◽  
L. F. Lemmens ◽  
G. Kamieniarz

PIERS Online ◽  
2010 ◽  
Vol 6 (1) ◽  
pp. 36-40 ◽  
Author(s):  
Hailiang Li ◽  
Yu Tian ◽  
Tong Ling

Author(s):  
E.B. Solovyeva ◽  
◽  
Yu.M. Inshakov ◽  

General approaches to the analysis of the Gibbs phenomenon for discontinuous periodic signals approximated by the truncated Fourier series are considered. Methods for smoothing the truncated Fourier series and improving its convergence are discussed. The software means for modeling is a universal measuring complex LabVIEW, which possesses a convenient environment for analyzing electrical signals, on the basis of this complex a laboratory experiment is carried out. The advantages of the measuring LabVIEW complex and its capabilities for in-depth study of discontinuous periodic signals are noted.


Author(s):  
V. F. Edneral ◽  
O. D. Timofeevskaya

Introduction:The method of resonant normal form is based on reducing a system of nonlinear ordinary differential equations to a simpler form, easier to explore. Moreover, for a number of autonomous nonlinear problems, it is possible to obtain explicit formulas which approximate numerical calculations of families of their periodic solutions. Replacing numerical calculations with their precalculated formulas leads to significant savings in computational time. Similar calculations were made earlier, but their accuracy was insufficient, and their complexity was very high.Purpose:Application of the resonant normal form method and a software package developed for these purposes to fourth-order systems in order to increase the calculation speed.Results:It has been shown that with the help of a single algorithm it is possible to study equations of high orders (4th and higher). Comparing the tabulation of the obtained formulas with the numerical solutions of the corresponding equations shows good quantitative agreement. Moreover, the speed of calculation by prepared approximating formulas is orders of magnitude greater than the numerical calculation speed. The obtained approximations can also be successfully applied to unstable solutions. For example, in the Henon — Heyles system, periodic solutions are surrounded by chaotic solutions and, when numerically integrated, the algorithms are often unstable on them.Practical relevance:The developed approach can be used in the simulation of physical and biological systems.


2014 ◽  
Author(s):  
Zhongjin Yang ◽  
Keli Han ◽  
Marat Molyboga ◽  
Georgiy Molyboga

Sign in / Sign up

Export Citation Format

Share Document