Abstract
The aim of this work is to identify solid sorbents for CO2 capture for coal and biomass syngas conditioning and cleaning by means of a sorption-enhanced reaction process. Hydrotalcite-like compounds (HTlcs) were synthesized with and without K2CO3 impregnation. Samples were characterized by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) and Barrett–Joyner–Halenda (BJH) porosimetry after synthesis and after capture tests, respectively. Sorption and desorption tests were performed in a fluidized bed reactor, under cyclic conditions, at two different temperature levels: 350/450°C and 600/700°C. At low temperature only the Mg–Al HTlcs K promoted samples showed stability and sorption capacity comparable with literature values. On the other hand, results at high temperature indicate that the mixed Mg-Ca-Al HTlcs samples exhibit the best behavior with the highest sorption capacity (1.7 mmolCO2/g) almost stable over 5 sorption/regeneration cycles; furthermore, addition of steam allowed increasing their reactivity by 70% compared to the dry value. This type of sorbent could be a promising candidate to prepare a bifunctional sorbent–catalyst for sorption-enhanced processes, taking place directly in the fluidized bed gasifier, or downstream the reactor for adjustment of gas composition before further conversion in gaseous energy carriers.
Validation of cutoffs for skeletal muscle mass index based on computed tomography analysis against dual energy X-ray absorptiometry in patients with cirrhosis: the KIRRHOS study