Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model

2009 ◽  
Vol 25 (5) ◽  
pp. 838-860 ◽  
Author(s):  
Guozheng Kang ◽  
Yujie Liu ◽  
Jun Ding ◽  
Qing Gao
Author(s):  
Francis R. Phillips ◽  
Daniel Martin ◽  
Dimitris C. Lagoudas ◽  
Robert W. Wheeler

Shape memory alloys (SMAs) are unique materials capable of undergoing a thermo-mechanically induced, reversible, crystallographic phase transformation. As SMAs are utilized across a variety of applications, it is necessary to understand the internal changes that occur throughout the lifetime of SMA components. One of the key limitations to the lifetime of a SMA component is the response of SMAs to fatigue. SMAs are subject to two kinds of fatigue, namely structural fatigue due to cyclic mechanical loading which is similar to high cycle fatigue, and functional fatigue due to cyclic phase transformation which typical is limited to the low cycle fatigue regime. In cases where functional fatigue is due to thermally induced phase transformation in contrast to being mechanically induced, this form of fatigue can be further defined as actuation fatigue. Utilizing X-ray computed microtomography, it is shown that during actuation fatigue, internal damage such as cracks or voids, evolves in a non-linear manner. A function is generated to capture this non-linear internal damage evolution and introduced into a SMA constitutive model. Finally, it is shown how the modified SMA constitutive model responds and the ability of the model to predict actuation fatigue lifetime is demonstrated.


2010 ◽  
Vol 150-151 ◽  
pp. 330-333
Author(s):  
Yan Jun Chang ◽  
Ke Shi Zhang ◽  
Gui Qiong Jiao ◽  
Jian Yun Chen

An anisotropic damage constitutive model is developed to describe the damage behavior of C/SiC composites. Different kinematic and isotropic hardening functions were employed in damage yield function to describe accurately the damage nonlinear hardening. The damage variable is defined by the principle of energy equivalence. The degradation of stiffness and the unrecoverable deformation induced by micro-crack propagation were considered in this model. The constants of constitutive model are identified and the damage evolution processes under tensile and shear loading. Uniaxial tension and shear tests have been used to valid the constitutive model to C/SiC composites.


2020 ◽  
Vol 29 (6) ◽  
pp. 988-1008 ◽  
Author(s):  
Shijie Xie ◽  
Hang Lin ◽  
Yixian Wang ◽  
Yifan Chen ◽  
Wei Xiong ◽  
...  

The whole shear deformation of rock joints significantly affects the long-term behavior and safety of engineering projects. In this paper, a new damage constitutive model related to the Weibull distribution and statistical damage theory is proposed. This model considers the shear stiffness degradation, post-peak softening, and residual phase of rock joints in the whole shearing process. Main works include the three following aspects: First, the phase of initial damage is determined on the assumption that the joint shear failure is regarded as a result of damage evolution, according to the typical joint shear curve and the three-parameter Weibull distribution. Then, a statistical damage evolution model for the whole joint shearing process is introduced to make this model be capable of describing the residual phase of rock joints. Finally, a statistical constitutive model for the whole joint shearing process is proposed by statistical damage theory, and the calculated results of the models are compared to the experimental results. The results indicate that the proposed model shows a good agreement with the experimental examples, and the proposed model can distinctly reflect the effects of residual stress, peak stress, and shear stiffness. In addition, the model parameters can be mathematically confirmed and have distinct physical meanings.


Sign in / Sign up

Export Citation Format

Share Document