scholarly journals Human-structure interaction experiments to determine the dynamic properties of the standing human body in vertical vibration

Structures ◽  
2020 ◽  
Vol 26 ◽  
pp. 934-946 ◽  
Author(s):  
Raad Hashim ◽  
Tianjian Ji ◽  
Parthasarathi Mandal ◽  
Qingwen Zhang ◽  
Ding Zhou
2021 ◽  
Vol 11 (14) ◽  
pp. 6407
Author(s):  
Huiqi Liang ◽  
Wenbo Xie ◽  
Peizi Wei ◽  
Dehao Ai ◽  
Zhiqiang Zhang

As human occupancy has an enormous effect on the dynamics of light, flexible, large-span, low-damping structures, which are sensitive to human-induced vibrations, it is essential to investigate the effects of pedestrian–structure interaction. The single-degree-of-freedom (SDOF) mass–spring–damping (MSD) model, the simplest dynamical model that considers how pedestrian mass, stiffness and damping impact the dynamic properties of structures, is widely used in civil engineering. With field testing methods and the SDOF MSD model, this study obtained pedestrian dynamics parameters from measured data of the properties of both empty structures and structures with pedestrian occupancy. The parameters identification procedure involved individuals at four walking frequencies. Body frequency is positively correlated to the walking frequency, while a negative correlation is observed between the body damping ratio and the walking frequency. The test results further show a negative correlation between the pedestrian’s frequency and his/her weight, but no significant correlation exists between one’s damping ratio and weight. The findings provide a reference for structural vibration serviceability assessments that would consider pedestrian–structure interaction effects.


1990 ◽  
Vol 6 (4) ◽  
pp. 641-655 ◽  
Author(s):  
Gregory L. Fenves ◽  
Giorgio Serino

An evaluation of the response of a fourteen story reinforced concrete building to the 1 October 1987 Whittier earthquake and 4 October 1987 aftershock shows significant effects of soil-structure interaction. A mathematical model of the building-foundation-soil system provides response quantities not directly available from the records. The model is calibrated using the dynamic properties of the building as determined from the processed strong motion records. Soil-structure interaction reduces the base shear force in the longitudinal direction of the building compared with the typical assumption in which interaction is neglected. The reduction in base shear for this building and earthquake is approximately represented by proposed building code provisions for soil-structure interaction.


1989 ◽  
Vol 22 (2) ◽  
pp. 81-94 ◽  
Author(s):  
Thomas E. Fairley ◽  
Michael J. Griffin

Author(s):  
S. Aisyah Adam ◽  
N. A. A. Jalil ◽  
K. A. Md Razali ◽  
Y. G. Ng ◽  
M. F. Aladdin

Off-road drivers are exposed to a high magnitude of vibration at low frequency (0.5-25Hz), that can cause harm and possibly attribute to musculoskeletal disorder, particularly low-back pain. The suspension seat is commonly used on an off-road condition to isolate the vibration transmitted to the human body. Nevertheless, the suspension seat modelling that incorporates the human body is still scarce. The objective of this study is to develop a mathematical modelling to represent the suspension seat-person for off-road vehicles. This paper presents a three degrees-of-freedom lumped parameter model. A curve-fitting method is used for parameter identification, which includes the constraint variable function (fmincon()) from the optimisation toolbox of MATLAB(R2017a). The model parameters are optimised using experimentally measured of suspension seat transmissibility. It was found that the model provides a reasonable fit to the measured suspension seat transmissibility at the first peak of resonance frequency, around 2-3 Hz. The results of the study suggested that the human body forms a coupled system with the suspension seat and thus affects the overall performance of the suspension system.  As a conclusion, the influence of the human body should not be ignored in the modelling, and a three-degrees degree-of-freedom lumped parameter model provides a better prediction of suspension seat transmissibility. This proposed model is recommended to predict vibration transmissibility for off-road suspension seat.


Sign in / Sign up

Export Citation Format

Share Document