Investigation of mud density and weighting materials effect on drilling fluid filter cake properties and formation damage

2016 ◽  
Vol 117 ◽  
pp. 345-357 ◽  
Author(s):  
K.A. Fattah ◽  
A. Lashin
2011 ◽  
Author(s):  
Salaheldin Elkatatny ◽  
Mohamed Ahmednasreldin Mahmoud ◽  
Hisham A. Nasr-El-Din

Géotechnique ◽  
2001 ◽  
Vol 51 (9) ◽  
pp. 777-785 ◽  
Author(s):  
P. Cerasi ◽  
K. Soga

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1485 ◽  
Author(s):  
Salaheldin Elkatatny ◽  
Tural Jafarov ◽  
Abdulaziz Al-Majed ◽  
Mohamed Mahmoud

Drilling multilateral and horizontal wells through tight gas reservoirs is a very difficult task. The drilling fluid should be designed to reduce both fluid and solid invasion into the tight formation to avoid formation damage by aqueous phase trapping. The objective of this paper is to assess the effect of sodium silicate on the drilling fluid properties such as rheological and filtration properties. Rheological properties (RPs) were measured at different temperatures while the filtration test was performed at 300 °F and 300 psi differential pressure. A retained permeability calculation was determined to confirm the prevention of solid invasion. The rheological properties results confirmed that the optimal concentration of sodium silicate (SS) was 0.075 wt.% and at the same time, the temperature has no effect on the SS optimum concentration. Using 0.075 wt.% of SS reduced the filtrate volume by 53% and decreased the filter cake thickness by 65%. After mechanical removal of the filter cake, the return permeability of the tight sandstone core was 100% confirming the prevention of solid invasion. The computer tomography (CT) scanner showed that the CT number before and after the filtration test was very close (almost the same) indicating zero solid invasion and prevention of the formation damage.


2010 ◽  
Author(s):  
Richard M. Hodge ◽  
Robert C. Burton ◽  
Christine C. Fischer ◽  
Vernon George Constien

2016 ◽  
Vol 847 ◽  
pp. 519-526
Author(s):  
Yu Kun Mei ◽  
Ming Li ◽  
Lu Liu ◽  
Biao Zhou ◽  
Xiao Yang Guo

It is difficult for conventional drilling fluid filter cake to form integration cementation with cement sheath, which causing weak cementation of the second interface. Therefore the following researches on improving the second interface cementation strength were carried out based on alkali activation mechanism of metakaolin. Cementation strength between metakaolin drilling fluid filter cake and cement sheath has been observed; the mechanism has been analyzed through SEM, XRD and FT-IR; engineering application performance of metakaolin drilling fluid has been studied; and circulation time of the technology has been researched. The results of the experiments showed that: 1) adding metakaolin into drilling fluid was helpful to improve the second interface cementing performance; 2) calcium hydroxide produced by cement hydration inspired metakaolin to generate C-S-H gel and realized overall cementation of filter cake and cement sheath; 3) through select particle size of metakaolin matched with other solids in drilling fluid, drilling fluid performance index could meet requirements of engineering application; 4) and for best results, the circulation time of metakaolin drilling fluid should be more than 40 minutes. The results prove that metakaolin drilling fluid can improve the second interface cementation performance, showing feasibility on flied using and practical values on improving wellbore integrity.


1999 ◽  
Vol 121 (3) ◽  
pp. 149-153 ◽  
Author(s):  
U. A. Tare ◽  
N. E. Takach ◽  
S. Z. Miska ◽  
F. B. Growcock ◽  
N. Davis

This work discusses the effect of incorporating blast furnace slag (BFS) as an additive in water-based drilling fluids. The intent of this treatment is rapid development of a thin, impervious, and easily removable filter cake, thereby minimizing detrimental impact of the drilling fluid on formation productivity as opposed to previous applications of BFS in universal fluids. To evaluate the impact of BFS on filter cake properties, permeability plugging apparatus (PPA) tests and dynamic formation damage (DFD) studies were conducted. Drill-in fluids and dispersed muds were tested using varying quantities of BFS. Once a steady rate of dynamic filter cake deposition was achieved, the BFS in the filter cakes was chemically activated. The results obtained from these activation studies were compared with those obtained with no BFS and with unactivated BFS. The nature of the filter cakes was examined with an environmental scanning electron microscope (ESEM). Results obtained from the PPA tests indicate substantial decreases in initial spurt loss and filtrate volume with increasing concentration of BFS. The DFD studies substantiate the aforementioned observations and show enhancement of return permeabilities with BFS activation. ESEM studies demonstrate that BFS can consolidate filter cakes.


Sign in / Sign up

Export Citation Format

Share Document