Surplus forest biomass – The cost of utilisation through optimised logistics and fuel upgrading in northern Sweden

2020 ◽  
Vol 275 ◽  
pp. 123151
Author(s):  
David A. Agar ◽  
Martin Svanberg ◽  
Ingemar Lindh ◽  
Dimitris Athanassiadis
2017 ◽  
Vol 41 (6) ◽  
Author(s):  
Marcos Antonio da Silva Miranda ◽  
Gabriel Browne de Deus Ribeiro ◽  
Sebastião Renato Valverde ◽  
Crismeire Isbaex

ABSTRACT The main objective of this work was to identify and analyze the potential of forest biomass of Eucalyptus sp. such as thermal energy source for industrial use in place of fossil fuels. Two cases were analyzed: the first one estimated the total demand for forest biomass to replace the main fossil fuels in Brazilian industrial sector, with scenarios of 100, 75 and 50% replacement; in the second, it was calculated the cost of each fuel for producing ton of industrial steam (thermal energy) for a dairy industry, in order to verify the competitiveness of forest biomass compared to fossil fuels. The results showed that the areas demanded to replace 100, 75 and 50% of the analyzed fossil fuels were, respectively, 2.9, 2.2 and 1.5 million planted forests hectares, and the steam ton cost ratio using the woodchips was at least 34% lower than with other fuels, which corroborates the substitution potential in this sector.


2000 ◽  
Vol 30 (11) ◽  
pp. 1817-1823 ◽  
Author(s):  
Karin Öhman

Harvest activities tend often to create landscapes where the old forest is fragmented into isolated patches that provide marginal conditions for species that inhabit forest interiors. This paper presents a long-range planning model designed to maximize the net present value and to create continuous patches of old forest. In this model, the spatial structure of old forest is controlled by core area and edge habitats. Core area is defined as the area of old forest that is free of edge effects from surrounding habitats. The core area requirement is set to a fixed value for each of a number of time periods, whereas the area of edge habitats, which should be as small as possible, is weighted against the net present value. The model is applied in a case study to an actual landscape consisting of 755 stands of forest in northern Sweden and solved using simulated annealing. The results show that distinct continuous patches of old forest are created when both a core area requirement and consideration of the amount of edge habitats are included in the problem formulation. The cost of creating continuous areas of old forest was found to be significant.


Author(s):  
James F. Mancuso

IBM PC compatible computers are widely used in microscopy for applications ranging from control to image acquisition and analysis. The choice of IBM-PC based systems over competing computer platforms can be based on technical merit alone or on a number of factors relating to economics, availability of peripherals, management dictum, or simple personal preference.IBM-PC got a strong “head start” by first dominating clerical, document processing and financial applications. The use of these computers spilled into the laboratory where the DOS based IBM-PC replaced mini-computers. Compared to minicomputer, the PC provided a more for cost-effective platform for applications in numerical analysis, engineering and design, instrument control, image acquisition and image processing. In addition, the sitewide use of a common PC platform could reduce the cost of training and support services relative to cases where many different computer platforms were used. This could be especially true for the microscopists who must use computers in both the laboratory and the office.


Author(s):  
H. Rose

The imaging performance of the light optical lens systems has reached such a degree of perfection that nowadays numerical apertures of about 1 can be utilized. Compared to this state of development the objective lenses of electron microscopes are rather poor allowing at most usable apertures somewhat smaller than 10-2 . This severe shortcoming is due to the unavoidable axial chromatic and spherical aberration of rotationally symmetric electron lenses employed so far in all electron microscopes.The resolution of such electron microscopes can only be improved by increasing the accelerating voltage which shortens the electron wave length. Unfortunately, this procedure is rather ineffective because the achievable gain in resolution is only proportional to λ1/4 for a fixed magnetic field strength determined by the magnetic saturation of the pole pieces. Moreover, increasing the acceleration voltage results in deleterious knock-on processes and in extreme difficulties to stabilize the high voltage. Last not least the cost increase exponentially with voltage.


1994 ◽  
Vol 58 (11) ◽  
pp. 832-835 ◽  
Author(s):  
ES Solomon ◽  
TK Hasegawa ◽  
JD Shulman ◽  
PO Walker
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document