Effect of physico-chemical parameters on inorganic arsenic removal from aqueous solution using a forward osmosis membrane

2014 ◽  
Vol 2 (3) ◽  
pp. 1309-1316 ◽  
Author(s):  
Priyanka Mondal ◽  
Nick Hermans ◽  
Anh Thi Kim Tran ◽  
Yang Zhang ◽  
Yanyan Fang ◽  
...  
Author(s):  
Mayuree A. Patel ◽  
Sanjeev R Acharya ◽  
Carol P. Macwan ◽  
Tejas B. Patel ◽  
B. N. Suhagia

Objective: The present study was aimed to identify the physicochemical data of shodhit guggul. Guggul is a gum-resin exudate from the plant Commiphora weightii (Arn.) Bhandari, belonging to Burseraceae family. In Ayurveda, guggul is always purified. This purification is known as Shodhan. Shodhan is a process by which guggul is made non-toxic, effective, suitable and fit for therapeutic purposes.Methods: The seven different shodhan dravya were used to prepare shodhit guggul. They were evaluated by performing physicochemical parameters including five different extractive value; total ash, acid insoluble, water soluble and sulphated ash value; pH, and loss on drying.Results: Analytical results of raw guggul showed total ash, acid insoluble ash, water soluble ash and sulphated ash value to 5.36±0.04%, 0.96±0.03%, 4.51±0.03 % and 8.40±0.04% respectively. These all values of each shodhit guggul were different. The extractive value of raw guggul was comparable with standard value while the extractive value of each shodhit guggul was totally different. The pH value of 1% w/v and 10% w/v aqueous solution of raw guggul was 6.44±0.18 though pH of each shodhit guggul was changed. The loss on drying of raw guggul was found to be 1.88±0.02%w/v, however, this value was different for each shodhit guggul.Conclusion: The present study revealed that the different shodhan process with specific shodhan dravya affects the physicochemical parameters. The analysis and comparison of the data showed the difference in the properties of seven shodhit guggul with respect to raw Guggul.


2004 ◽  
Vol 822 ◽  
Author(s):  
Magali Koelsch ◽  
Sophie Cassaignon ◽  
Jean-Pierre Jolivet

AbstractNanometric particles of titania, exhibiting anatase, brookite or rutile polymorphs, were synthesized by thermohydrolysis of TiCl4 in aqueous medium. The adjustement of physico-chemical parameters (acidity, ionic strength, anions, temperature) allows to tune the crystalline structure, the size and the morphology of the particles. Brookite results from the precipitation of titanium in HCl, HBr or HNO3 whereas anatase is formed in H2SO4 medium. Adding salts in HCl medium leads to ionic strength or complexation effect. Varying the temperature of thermohydrolysis implies modification on yield, size and morphology of the particles.


CrystEngComm ◽  
2015 ◽  
Vol 17 (36) ◽  
pp. 6780-6795 ◽  
Author(s):  
Nathalie Steunou ◽  
Jacques Livage

This highlight deals with the recent advances on the synthesis in aqueous solution of one-dimensional vanadium(v) oxide nanocrystals.


2019 ◽  
Vol 23 (1) ◽  
pp. 81-87
Author(s):  
Asmita Shrestha ◽  
Bhoj Raj Poudel ◽  
Manoj Silwal ◽  
Megh Raj Pokhrel

 Raw and charred Fe(III)-loaded Litchi chinensis seed waste (FeRLW and FeCLW) as bio-adsorbents was investigated to remove phosphate from aqueous solution. Various physico-chemical parameters such as equilibrium time, pH and adsorbent dosage were studied by batch experiment method. The maximum adsorption capacities for phosphate removal by FeRLW and FeCLW were found to be 96.5 mg/g and 100 mg/g, respectively. The experimental results revealed that biomaterials of FeRLW and FeCLW can be used as effective and economically viable adsorbents for the removal of phosphate from waste water.


2012 ◽  
Vol 2 (10) ◽  
pp. 1-3
Author(s):  
Gyaneswar Bhuyan ◽  
◽  
Dr. R. Anandhan Dr. R. Anandhan ◽  
V. kavitha V. kavitha

2007 ◽  
Vol 9 (3) ◽  
pp. 236-246
Author(s):  
P. D. Magesh ◽  
J. Santanakumar ◽  
P. Venkateshwaran ◽  
A. K. Abdul Nazar ◽  
R. Venkatesan ◽  
...  

2018 ◽  
Vol 8 (5) ◽  
pp. 48-50
Author(s):  
N.V. Lakina ◽  
◽  
A.I. Golovko ◽  
V.Yu. Doluda ◽  
V.G. Matveeva ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document