A novel turn-on red light emitting chromofluorogenic hydrazone based fluoride sensor: Spectroscopy and DFT studies

Author(s):  
Soma Mukherjee ◽  
Soumi Betal ◽  
Asoke Prasun Chattopadhyay
2019 ◽  
Author(s):  
Makesh Mohan ◽  
M. N. Satyanarayan ◽  
Darshak R. Trivedi
Keyword(s):  

ACS Omega ◽  
2018 ◽  
Vol 3 (8) ◽  
pp. 9981-9988 ◽  
Author(s):  
Hashem Shahroosvand ◽  
Leyla Heydari ◽  
Babak Nemati Bideh ◽  
Babak Pashaei ◽  
Sara Tarighi ◽  
...  

2020 ◽  
Vol 19 (11) ◽  
pp. 1224-1229 ◽  
Author(s):  
Alim Abdurahman ◽  
Timothy J. H. Hele ◽  
Qinying Gu ◽  
Jiangbin Zhang ◽  
Qiming Peng ◽  
...  

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Lung-Chien Chen ◽  
Yi-Tsung Chang ◽  
Ching-Ho Tien ◽  
Yu-Chun Yeh ◽  
Zong-Liang Tseng ◽  
...  

AbstractThis work presents a method for obtaining a color-converted red light source through a combination of a blue GaN light-emitting diode and a red fluorescent color conversion film of a perovskite CsPbI3/TOPO composite. High-quality CsPbI3 quantum dots (QDs) were prepared using the hot-injection method. The colloidal QD solutions were mixed with different ratios of trioctylphosphine oxide (TOPO) to form nanowires. The color conversion films prepared by the mixed ultraviolet resin and colloidal solutions were coated on blue LEDs. The optical and electrical properties of the devices were measured and analyzed at an injection current of 50 mA; it was observed that the strongest red light intensity was 93.1 cd/m2 and the external quantum efficiency was 5.7% at a wavelength of approximately 708 nm when CsPbI3/TOPO was 1:0.35.


2017 ◽  
Vol 41 (18) ◽  
pp. 9826-9839 ◽  
Author(s):  
Boddula Rajamouli ◽  
Rachna Devi ◽  
Abhijeet Mohanty ◽  
Venkata Krishnan ◽  
Sivakumar Vaidyanathan

The red light emitting diode (LED) was fabricated by using europium complexes with InGaN LED (395 nm) and shown digital images, corresponding CIE color coordinates (red region) as well as obtained highest quantum yield of the thin film (78.7%).


2007 ◽  
Vol 989 ◽  
Author(s):  
Gong-Ru Lin ◽  
Chun-Jung Lin

AbstractA Si nanocrystal based metal-oxide-semiconductor light-emitting diode (MOSLED) on Si nano-pillar array is preliminarily demonstrated. Rapid self-aggregation of Ni nanodots on Si substrate covered with a thin SiO2 buffered layer is employed as the etching mask for obtaining Si nano-pillar array. Dense Ni nanodots with size and density of 30 nm and 2.8×10 cm-2, respectively, can be formatted after rapid thermal annealing at 850°C for 22 s. The nano-roughened Si surface contributes to both the relaxation of total-internal reflection at device-air interface and the Fowler-Nordheim tunneling enhanced turn-on characteristics, providing the MOSLED a maximum optical power of 0.7 uW obtained at biased current of 375 uA. The optical intensity, turn-on current, power slope and external quantum efficiency of the MOSLED are 140 μW/cm2, 5 uA, 2+-0.8 mW/A and 1×10-3, respectively, which is almost one order of magnitude larger than that of a same device made on smooth Si substrate.


2014 ◽  
Vol 52 ◽  
pp. 227-237 ◽  
Author(s):  
Yu-Xun Wang ◽  
Ching-Nan Chuang ◽  
Chiou-Ling Chang ◽  
Yi-Ting Wu ◽  
Chung-Yi Chang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document