Linearized formulation for fluid–structure interaction: Application to the linear dynamic response of a pressurized elastic structure containing a fluid with a free surface

2013 ◽  
Vol 332 (10) ◽  
pp. 2396-2414 ◽  
Author(s):  
J.-S. Schotté ◽  
R. Ohayon
2017 ◽  
Vol 2017 ◽  
pp. 1-20 ◽  
Author(s):  
Yulin Deng ◽  
Qingkang Guo ◽  
Lueqin Xu

This paper presents an experimental program performed to study the effect of fluid-structure interaction on the modal dynamic response of water-surrounded slender bridge pier with pile foundation. A reduced scale slender bridge pier specimen is built and tested through forced vibration method. The vibration periods of the first four lateral modes, including the first two modes along x-axis and the first two modes along y-axis, are measured based on the specimen submerged by 16 levels of water and designated with 4 levels of tip mass. Three-dimensional (3D) finite-element models are established for the tested water-pier system and analyzed under various combined cases of water level and tip mass. Percentage increases of vibration periods with respect to dry vibration periods (i.e., vibration periods of the specimen without water) are determined as a function of water level and tip mass to evaluate the effect of fluid-structure interaction. The numerical results are successfully validated against the recorded test data. Based on the validated models, the modal hydrodynamic pressures are calculated to characterize the 3D distribution of hydrodynamic loads on the pier systems. The research provides a better illumination into the effect of fluid-structure interaction on the modal dynamic response of deepwater bridges.


2018 ◽  
Author(s):  
H. R. Díaz-Ojeda ◽  
L. M. González ◽  
F. J. Huera-Huarte

The aim of this paper is to evaluate how much affects the presence of gravity and free-surface to a flexible structure in a classical fluid structure interaction (FSI) problem typically found in off-shore problems and other oceanic applications. The base problem selected is the Turek benchmark case where a deformable plate is attached to the wake of a circular cylinder. To focus on the differences of considering free surface, a simple geometry has been selected and two different situations have been studied: the first one is the classical Turek benchmark, the second is a similar geometry but adding gravity and free surface. The free surface problem was studied placing the structure at different depths and monitoring the deformation and forces on the structure.


Sign in / Sign up

Export Citation Format

Share Document