coated fabric
Recently Published Documents


TOTAL DOCUMENTS

228
(FIVE YEARS 76)

H-INDEX

20
(FIVE YEARS 5)

Polymers ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 147
Author(s):  
Xiaoyu Xie ◽  
Yang Liu ◽  
Ying Zhu ◽  
Zhao Xu ◽  
Yanping Liu ◽  
...  

Smart textile with IR radiative cooling is of paramount importance for reducing energy consumption and improving the thermal comfort of individuals. However, wearable textile via facile methods for indoor/outdoor thermal management is still challenging. Here we present a novel simple, yet effective method for versatile thermal management via silver-coated polyamide (PA) textile. Infrared transmittance of coated fabric is greatly enhanced by 150% due to the multi-order reflection of silver coating. Based on their IR radiative cooling, indoors and outdoors, the skin surface temperature is lower by 1.1 and 0.9 °C than normal PA cloth, allowing the textile to be used in multiple environments. Moreover, the coated fabric is capable of active warming up under low voltage, which can be used in low-temperature conditions. These promising results exemplify the practicability of using silver-coated textile as a personal thermal management cloth in versatile environments.


2021 ◽  
Author(s):  
Ling Lin ◽  
Chunxia Wang ◽  
Haiyan Mao ◽  
Huanling Wu ◽  
Ziyin Li

Abstract Research on multi-functional fabrics is an inevitable trend in the future development of textile field. Nevertheless, the key to the development of multifunctional fabric is how to solve the problem of contradictory function combination and how to achieve the multifunctions. In this work, a novel multifunctional fabric based on cellulose/silica microcapsules was developed by using green, facile and economical methods. Owing to the loaded essence and hydrophobic coupling reagent and UV absorber modified silica of microcapsules, the coated fabric not only exhibited slow-release property of fragrance, but also had excellent superhydrophobicity and ultraviolet (UV) protection. Furthermore, multifunctional fabric also displayed the durable superhydrophobicity and UV protection even after chemically or mechanically damaged. The development of mulfunctional fabrics largely depends on the development of textile functional finishing agent and finishing technology. Therefore, it is very important to develop new functional micrcapsules or finishing agent.


2021 ◽  
pp. 004051752110417
Author(s):  
Hengyu Zhang ◽  
Jianying Chen ◽  
Hui Ji ◽  
Ni Wang ◽  
Hong Xiao

Three kinds of electromagnetic functional materials, frequency selective surface, carbonyl iron coated absorbing fabric and conductive woven fabric, were laminated to filter, absorb and reflect electromagnetic waves. Through equivalent circuit analysis, the frequency selection characteristics and the correlation between the shape and size of the periodic structure of cross-shaped and Jerusalem-shaped frequency selective surfaces were studied. It is found that frequency selective surfaces can reduce the transmission coefficient of carbonyl iron coated fabric at the resonance point, so that the working frequency band of the composite shielding material can be controlled and adjusted. The stacking order has no effect on the frequency selective surface/frequency selective surface double-layer materials, but influence the transmission coefficient of composite materials with frequency selective surface superimposed carbonyl iron coated fabric and/or conductive woven fabric. Among all samples, the transmission coefficient of Jerusalem-shaped/carbonyl iron coated fabric-3/conductive woven fabric has the most strong shielding effect, which is up to −51.72 dB at 10.48 GHz. It is proved that using flexible fabric as the matrix and compounding materials with different electromagnetic functions is an effective method to realize high efficiency and adjustable electromagnetic shielding ability.


2021 ◽  
pp. 152808372110542
Author(s):  
Hireni Mankodi ◽  
Bharat Patel

The biogenic silver nano sol (AgNS) is most suitable for biomedical applications due to its inherent properties. In the present investigation polyester (P), viscose (V) and polyester/viscose blend (50:50) (PV) spunlaced fabrics were coated with AgNS prepared using organic honey, manuka honey. The dip-coated fabric samples were found suitable for wound dressing purposes when evaluated layered wise for their mechanical properties. The layer-wise dispersion behavior of the V sample was found better than the P/V and P samples. In the case of the air permeability sample, P/V performed better compared to V and P samples. Water sorption ability of P/V and V are found suitable for wound dressing. The ultraviolet protection factor value of treated fabric found excellent when coated with only honey. Further, the AgNS loaded fabric exhibited good resistance against microbial organisms as revealed by the bromophenol blue stain.


Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3097
Author(s):  
Azam Ali ◽  
Fiaz Hussain ◽  
Ambreen Kalsoom ◽  
Tauqeer Riaz ◽  
Muhammad Zaman Khan ◽  
...  

In this study, we developed multifunctional and durable textile sensors. The fabrics were coated with metal in two steps. At first, pretreatment of fabric was performed, and then copper and silver particles were coated by the chemical reduction method. Hence, the absorbance/adherence of metal was confirmed by the deposition of particles on microfibers. The particles filled the micro spaces between the fibers and made the continuous network to facilitate the electrical conduction. Secondly, further electroplating of the metal was performed to make the compact layer on the particle- coated fabric. The fabrics were analyzed against electrical resistivity and electromagnetic shielding over the frequency range of 200 MHz to 1500 MHz. The presence of metal coating was confirmed from the surface microstructure of coated fabric samples examined by scanning electron microscopy, EDS, and XRD tests. For optimized plating parameters, the minimum surface resistivity of 67 Ω, EMI shielding of 66 dB and Ohmic heating of 118 °C at 10 V was observed. It was found that EMI SH was increased with an increase in the deposition rate of the metal. Furthermore, towards the end, the durability of conductive textiles was observed against severe washing. It was observed that even after severe washing there was an insignificant increase in electrical resistivity and good retention of the metal coating, as was also proven with SEM images.


Author(s):  
Jing Li ◽  
Yanan Zhu ◽  
Mingqiao Ge

Abstract In recent years, luminous coated fabrics based on SrAl2O4: Eu2+, Dy3+ luminescent materials have attracted more attention. However, due to the single emission color of SrAl2O4: Eu2+, Dy3+ luminescent materials, the application of prepared coated fabrics has certain liminations. Therefore, at present, there is a need to develop a kind of luminous coated fabric which has the capability of emitting multiple colors of light. In this work, fluorescent pigments and SrAl2O4: Eu2+, Dy3+ luminescent materials were added to a coating slurry and uniformly coated over a woven fabric substrate. The effects of adding fluorescent pigments on the spectral characteristics of luminous coated fabrics were evaluated. The blue fluorescent pigment causes a significant blue shift in the emission spectrum of the blue light-emitting coated fabric, whereas the emission spectra of the orange and red light-emitting coated fabrics exhibit a significant red shift. The yellow-green fluorescent pigments significantly affect the coated fabric. The emission spectrum shows no evident change and is similar to the emission spectrum of white (without any fluorescent pigment) luminescent coated fabric. The afterglow brightness of the colored luminous coated fabrics decreases exponentially with time. Adding blue fluorescent pigments has a greater impact on the brightness of the coated fabrics. The initial brightness is lower and the afterglow brightness loss is higher when using yellow-green fluorescence. The pigment has little effect on the brightness loss of coated fabrics, and the initial brightness of the coated fabric increases when adding yellow-green fluorescent pigments. Fluorescent pigments result in relatively low color purity for each colored coated fabric. However, the color rendering index is high, and the color rendering performance for the light source is excellent.


Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2770
Author(s):  
Pei Dai ◽  
Haochen Li ◽  
Xianzhi Huang ◽  
Nan Wang ◽  
Lihua Zhu

Cu chips are cheaper than Ag and Au chips for practical SERS applications. However, copper substrates generally have weak SERS enhancement effects and poor stability. In the present work, Cu-based SERS chips with high sensitivity and stability were developed by a chemical reduction method. In the preparation process, Cu NPs were densely deposited onto fabric supports. The as-prepared Cu-coated fabric was hydrophobic with fairly good SERS performance. The Cu-coated fabric was able to be used as a SERS chip to detect crystal violet, and it exhibited an enhancement factor of 2.0 × 106 and gave a limit of detection (LOD) as low as 10–8 M. The hydrophobicity of the Cu membrane on the fabric is favorable to cleaning background interference signals and promoting the stability of Cu NPs to environment oxidation. However, this Cu SERS chip was still poor in its long-term stability. The SERS intensity on the chip was decreased to 18% of the original one after it was stored in air for 60 days. A simple introduction of Ag onto the clean Cu surface was achieved by a replacement reaction to further enhance the SERS performances of the Cu chips. The Ag-modified Cu chips showed an increase of the enhancement factor to 7.6 × 106 due to the plasmonic coupling between Cu and Ag in nanoscale, and decreased the LOD of CV to 10–11 M by three orders of magnitude. Owing to the additional protection of Ag shell, the SERS intensity of the Cu-Ag chip after a two-month storing maintained 80% of the original intensity. The Cu-Ag SERS chips were also applied to detect other organics, and showing wide linearity range and low LOD values for the quantitative detection.


2021 ◽  
pp. 108201322110496
Author(s):  
Joshua R. Cassar ◽  
Edward W. Mills ◽  
Ali Demirci

Contact with continuous belt conveyors during processing results in opportunities for pathogenic and spoilage microorganisms to contaminate meat products. The objective of this project is to investigate the germicidal response on the surface of food-grade conveyor belt materials treated with pulsed ultraviolet (PUV) light. Four conveyor belt types including: a stainless-steel chain-link belt, a polytetrafluoroethylene (PTFE)-coated fabric belt, a solid pliable polymer belt, and a rigid-linked polymer belt, were evaluated for the inactivation of Escherichia coli K12-NSR strain and lactic acid bacteria (LAB). Prior to bacterial inoculation, samples were classified as soiled or unsoiled, based on the presence or absence of pork intramuscular fluid on the surfaces of the conveyor samples. Using a variable speed conveyor, equipped with a Xenon flashlamp positioned 10-cm above the surface, each belt sample was exposed to PUV light at three fixed conveyor speeds: 3.05, 15.24, and 30.48 cm/sec, resulting in a total energy exposure of 3.31, 0.66 and 0.33 J/cm2, respectively. For samples inoculated with E. coli K12-NSR, the surface condition (soiled or unsoiled) by treatment interaction was significant for microbial inactivation on the surface of the rigid polymer linked belt (P < 0.05). For samples inoculated with the LAB cocktail, the same interaction was significant for the PTFE-coated fabric belt and the solid pliable polymer belt (P < 0.05). Microbial reduction ranged from 0.74 to 5.04 log10 CFU/cm2 for E. coli K12-NSR and 0.63 to 4.61 Log10 CFU/cm2 for LAB for the evaluated treatment parameters. The results of this project demonstrate that PUV light is an effective means of decontamination for conveyor belts during food processing.


Structures ◽  
2021 ◽  
Vol 33 ◽  
pp. 1354-1364
Author(s):  
Xiaoying Sun ◽  
Rijin He ◽  
Yue Wu ◽  
Tengfei Wang

Sign in / Sign up

Export Citation Format

Share Document