Evaluation of the structure and valence state of titanium oxide in titania slag under microwave heating

2021 ◽  
pp. 131475
Author(s):  
Jin Chen ◽  
Lei Gao ◽  
Shenghui Guo ◽  
Mamdouh Omran ◽  
Guo Chen
Keyword(s):  
Microwave Heating ◽  
Titanium Oxide ◽  
Valence State ◽  
Titania Slag

An investigation of phase transformation of titania slag using microwave heating

2015 ◽  
Vol 89 (9) ◽  
pp. 894-901
Author(s):  
Guo Chen ◽  
Jin Chen ◽  
Jinhui Peng
Keyword(s):  
Phase Transformation ◽  
Microwave Heating ◽  
Titania Slag

Valence state analysis of elements by EPMA and its application

1990 ◽  
Vol 48 (2) ◽  
pp. 230-231
Author(s):  
Chen Liqing ◽  
Liu Zuqin ◽  
Zhang Wei
Keyword(s):  
Valence State ◽  
Line Intensities ◽  
Valence States ◽  
Valence Electrons ◽  
Fe And Mn ◽  
Intensity Ratios ◽  
State Analysis

Valence state analyses of Fe and Mn in oxides by EPMA have been reported in literature. In this paper, the effects of valence state on intensity ratios ILα/IKα and ILα/ILβ of Cu, Ni, Co, Fe, Mn, Cr and their oxides, and on intensity ratios ILβ2/ILα1 and ILγ1/ILα1 of Mo, Nb, Zr and their oxides were studied. It was observed that intensity ratios change with valence states in accordance with some regularities, and these effects could be utilized for analyzing the valence states of catalysts.Valence state analysis of elements by EPMA is based on the fact that changes in the states of valence electrons in the outer shells of an atom cause corresponding changes in line intensities. The M electrons of Cu, Ni, Co, Fe, Mn, Cr and the N electrons of Mo, Nb, Zr are valence electrons. Line Kα1,2 and six lines of L are produced from the transitions of K-L2,3 and L-M or L-N respectively.

Theory for the mixed-valence state

1979 ◽  
Vol 40 (C5) ◽  
pp. C5-374-C5-374 ◽  
Author(s):  
C. M. Varma
Keyword(s):  
Valence State ◽  
Mixed Valence ◽  
Mixed Valence State

MIXED VALENCE STATE OF Sm ON THE SURFACE OF AMORPHOUS La80-xSmxAu20 ALLOYS

1980 ◽  
Vol 41 (C8) ◽  
pp. C8-799-C8-802 ◽  
Author(s):  
G. Krill ◽  
A. Amamou ◽  
A. Berrada ◽  
J. Durand ◽  
N. Hassanain
Keyword(s):  
Valence State ◽  
Mixed Valence ◽  
Mixed Valence State

Tc-99m Labeled Complexes of Aldehydes and Glutamate as Cholescintigraphic Agents

1975 ◽  
Vol 14 (04) ◽  
pp. 330-338
Author(s):  
L. G. Colombetti ◽  
J. S. Arnold ◽  
W. E. Barnes
Keyword(s):  
Nuclear Medicine ◽  
Gall Bladder ◽  
Rose Bengal ◽  
Valence State ◽  
Monosodium Glutamate ◽  
Kinetic Studies ◽  
Scintillation Camera ◽  
Blood Clearance ◽  
Lower Valence ◽  
Wire Basket

SummaryTc-99m pyridoxylidene glutamate has proven to be an excellent biliary scanning agent, far superior in many respect to the commonly used 1-131 rose bengal. The preparation of the compound as previously reported by Baker et al is too time consuming and requires the use of an autoclave which is not available in most nuclear medicine departments. In our facility, we have been preparing similar compounds using several aldehydes and monosodium glutamate to make labeled complexes having the same pharmacological characteristics. The mixture of monosodium glutamate, aldehyde, and Tc-99m pertechnetate is made slightly alkaline, purged with helium, and placed in a sealed vial. The vial, which is protected by a wire basket, is then heated in a laboratory oven at 130° C for a period of 15 to 20 minutes. During this time, the technetium is reduced to a lower valence state and bound to the complex formed. Chromatographic data show that these compounds are chemically similar to that previously reported. The compounds prepared concentrate in the gall bladder of the rabbit in less than 10 minutes. Kinetic studies have been performed on dogs with a scintillation camera and small digital computer to measure rates of blood clearance, liver and gall bladder uptake, and excretion into the intestine. The aldehyde — glutamate complex promises to be a useful scanning agent for the diagnosis of biliary and hepatocellular diseases.

Electron Holographic Nano-Characterization of Gold Catalyst at Interface

2002 ◽  
Vol 727 ◽  
Author(s):  
S. Ichikawa ◽  
T. Akita ◽  
M. Okumura ◽  
M. Haruta ◽  
K. Tanaka
Keyword(s):  
Contact Angle ◽  
Titanium Oxide ◽  
Gold Catalyst ◽  
Three Dimensional ◽  
High Resolution Electron Microscopy ◽  
Electron Holography ◽  
Gold Particles ◽  
Oxide Support ◽  
The Mean ◽  
A Charge

AbstractThe catalytic properties of nanostructured gold catalyst are known to depend on the size of the gold particles and to be activated when the size decreases to a few nanometers. We investigated the size dependence of the three-dimensional nanostructure on the mean inner potential of gold catalysts supported on titanium oxide using electron holography and high-resolution electron microscopy (HREM). The contact angle of the gold particles on the titanium oxide tended to be over 90° for gold particles with a size of over 5 nm, and below 90° for a size of below 2 nm. This decreasing change in the contact angle (morphology) acts to increase the perimeter and hence the area of the interface between the gold and titanium oxide support, which is considered to be an active site for CO oxidation. The mean inner potential of the gold particles also changed as their size decreased. The value of the inner potential of gold, which is approximately 25 V in bulk state, rose to over 40 V when the size of the gold particles was less than 2 nm. This phenomenon indicates the existence of a charge transfer at the interface between gold and titanium oxide. The 3-D structure change and the inner potential change should be attributed to the specific electronic structure at the interface, owing to both the “nano size effect” and the “hetero-interface effect.”

Sign in / Sign up

Export Citation Format

Share Document