The high time resolution detectors are relevant in those experiments or simulations were the particles to detect, have a very short time of flight (TOF), and due this it´s required that the detections times are ranged between ns. & ps.Using Geant4 software, it was made thirty simulations of coupled detectors to plastic scintillators with two silicon photomultipliers (SiPMs) located on the scintillator’s central sides. To characterize the time resolution, it was required to quantify the optical photons that reach the Score in a certain time, which are generated by muons on the surface of the plastic scintillator. Different configurations of muon beams were simulated at energy of 1 GeV, to interact with the configuration of the scintillator material of its corresponding arrangement. The simulations were made varying three parameters: the scintillator material “BC404 & BC422”, its size, and the location of the radiation source. Fifteen simulations correspond to BC404 material & fifteen simulations to BC422 material respectively. The first five simulations consisted in varying the scintillator’s volumetric size and collocate the muons beam guided randomly distributed over it, the next five simulations differentiate from setting up a directly centered beam, and the last five simulations for guide the beam on the left lower corner of each scintillator.The best time resolution achieved was σ= 8.67 +/− 0.26 ps., reported by the detector with BC422 scintillator material which has a volume of 20x20x3 mm3.
Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory