Permeability evolution of fractured granite after exposure to different high-temperature treatments

Thermal cracking and permeability evolution of granite under high temperature and triaxial compression are the key to designing high-level waste disposal sites. In this paper, uniaxial compression tests of granite specimens with different axial compression are designed, and then a solid-head-designed coupling triaxial testing system is applied to study thermal cracking and permeability evolution of granite specimen with different damage at different inlet gas pressures (1, 2, 4, and 6 MPa) and temperatures (ranging from 100 to 650°C). The test results show that granite, nearly impermeable rocks, can show a striking increase of permeability by heating beyond the critical temperature. When the initial axial pressure is 60% or 70% of the uniaxial compressive strength, the growth of granite permeability exhibits three stages during 100∼650°C heating process. Permeability increases by two orders of magnitude, but it does not reach the maximum value (i.e., a network of interconnected cracks is not fully formed in the specimen). With increasing initial damage, permeability shows a sharp increase. Permeability increases by three orders of magnitude, it is in equilibrium state, and a network of interconnected cracks is fully formed in the specimen. Permeability of granite has a critical temperature at which permeability increases sharply. When the temperature is lower than the critical temperature, the magnitude of permeability is 10−18 m2 with a slight increase. When temperature is higher than the critical temperature, the magnitude of permeability is 10−15 m2 with a sharp increase. The critical temperature is related to the initial damage of specimen, and the critical temperature is smaller with the initial damage going larger. Therefore, studying thermal cracking and permeability evolution of granite with different initial damage under high temperature and triaxial compression is expected to provide necessary and valuable insight into the design and construction of high-level waste disposal structures.

Download Full-text

Experimental Investigation on the Evolution of Damage and Seepage Characteristics for Red Sandstone under Thermal-mechanical Coupling Conditions

10.21203/rs.3.rs-365312/v1 ◽

2021 ◽

Author(s):

Haopeng Jiang ◽

Annan Jiang ◽

Fengrui Zhang

Keyword(s):

High Temperature ◽

Triaxial Compression ◽

Confining Pressure ◽

Effect Of Temperature ◽

Permeability Evolution ◽

Red Sandstone ◽

Permeability Characteristics ◽

Mechanical Coupling ◽

Coupling Conditions ◽

Rock Stability

Abstract Rock masses in underground space usually experience the coupling of high-temperature field, stress field and seepage field, which gives them complex mechanical behavior and permeability characteristics. In order to study the mechanical properties and permeability characteristics of red sandstone under different temperature environments, a seepage test under high temperature and triaxial compression is carried out based on the RLW-2000 multi-field coupling tester. The results show that the plastic flow of red sandstone at the stress peak under the same temperature is more obvious with the increase of confining pressure. In addition, as the confining pressure gradient increases, the permeability decreases and the trend becomes slower. And the higher the operating temperature, the easier to produce seepage channels inside the rock sample. The development of fissures is rapidly developed under the effect of temperature, so the seepage channels are widened and increased, and the permeability is greatly increased. The constitutive model of rock statistical damage considering the interaction of high temperature and osmotic pressure was constructed based on the experimental data and combining theoretical methods to reveal the characteristics of permeability evolution induced by thermal damage of rocks. The research results can be used as a reference for monitoring rock stability during geological engineering projects involving thermal-seepage-stress coupling conditions.

Download Full-text