AbstractDrawn composite thin film based on thermotropic liquid crystalline polymer (TLCP) and polypropylene (PP) was annealed at 130 °C at different times. The influence of annealing time on microstructural and mechanical properties of the composite film has been studied. The correlation in mechanical properties and their microstructural parameters has also been investigated. X-Ray diffraction results reveal that the smectic mesophase transforms progressively into the monoclinic phase as annealing time is increased. Consequently, the true crystallinity (Xc), crystal thickness (L) as well as relative level of molecular orientation of PP crystalline phase in the annealed TLCP/PP films are increased significantly. Also, the TLCP fibrils have no influence on the microstructure of PP crystalline phase. The apparent crystallinity (Xc,a) of PP phase evaluated by DSC also increase significantly with annealing time. As a result, the increases of these microstructural parameters coupled with the reinforcement of TLCP fibrils could be contributed directly to the remarkable enhancement of mechanical properties of the annealed TLCP/PP film in both machine (MD) and transverse (TD) directions. The correlation of moduli with microstructural parameters (Xc, Xc,a and L) exhibits nonlinear relations. However, the relative level of molecular orientation is a more suitable parameter to correlate with the improvement of mechanical properties of the annealed TLCP/PP film. Finally, this work presents that the mechanical properties of the TLCP in situ reinforced thermoplastics can be significantly enhanced via a simple thermal treatment.
The Molecular Orientation Behavior and the Crystallinity of CO2 Laser-Heated Drawn Poly(ethylene terephthalate) Fiber