Abstract
Activated carbon (AC) from coal, coconut and palm kernel shell was regenerated after adsorbing chlorate from chlor-alkali plant brine solutions. Hydrochloric acid (HCl) of 17% w/w concentration showed the ability to regenerate AC, with some chlorine gas being released. Regeneration with HCl yielded enhanced adsorption of chlorate. AC from coconut shell adsorbed chlorate better than coal and palm kernel shell AC. Higher chlorate concentration in the influent and lower influent pH resulted in better adsorption. Regeneration of the AC with 17% w/w HCl reduced chlorate to chlorine derivatives. The AC released 107 mg/g of chlorine during the first regeneration and 160–178 mg/g after the second regeneration. During regeneration, coal AC released the highest amount of chlorine at 0.51–0.59 mg/g of chlorate adsorbed followed by palm kernel shell with 0.34–0.36 mg/g, while coconut shell AC released 0.18 mg/g. Scanning electron micrograph of the coconut shell AC carried out after each regeneration showed the structure of AC remained intact, with active sites surfacing on the regenerated AC. Using AC for chlorate adsorption followed by regeneration with 17% w/w HCl may reduce the release of brine and chlorate to the environment from chlor-alkali plants.
Preparation and Characterization of Impregnated Activated Carbon from Palm Kernel Shell and Coconut Shell for CO2 Capture
