Prestressed concrete pipe pile with high bearing capacity, the advantages of convenient construction, low cost and widely used in practical engineering, because of the prestressed high strength concrete in use process is in complex stress state, both are under a lot of vertical load, and horizontal seismic action needs to be considered at the same time, it is necessary under the condition of considering the vertical load bearing capacity of prestressed high strength concrete level and considering the loading level, the horizontal bearing capacity. Scholars at home and abroad based on the simple hypothesis, puts forward the calculation method of a lot of interaction with soil, in the future will be adopted in calculation, using ABAQUS finite element analysis, this paper established the three-dimensional finite element model of prestressed concrete pipe pile, respectively under different vertical pressure (P = 4000 kn, P = 4800 kn, P = 6000 kn) one-way load and calculated the horizontal bearing capacity, and under repeated load, respectively to study the size of the different vertical pressure and different reinforcement stirrup ratio on its bearing capacity and seismic performance. The results show that the stiffness of pipe pile decreases significantly with the increase of vertical pressure under different vertical loads. With the increase of vertical load, the ductility and energy dissipation capacity of the components decrease gradually. The horizontal bearing capacity of prestressed high strength concrete pipe decreases with the increase of vertical pressure. However, its amplitude decreases with the increase of vertical pressure value.
Investigation on Corrosion of Welded Joint of Prestressed High-strength Concrete Pipe Piles