Determination of the burning velocity of gas/dust hybrid mixtures

2017 ◽  
Vol 109 ◽  
pp. 704-715 ◽  
Author(s):  
Nicolas Cuervo ◽  
Olivier Dufaud ◽  
Laurent Perrin
2018 ◽  
Vol 13 (6) ◽  
pp. 50
Author(s):  
Gleb V. Grenkin ◽  
Alexander Yu. Chebotarev ◽  
Valeri I. Babushok ◽  
Sergey S. Minaev

The optimization procedure was developed to derive the global kinetic parameters using experimental dependence of burning velocity on the equivalence ratio. The simple model of laminar premixed flame propagation with assumed constant parameters was used to demonstrate the features of the suggested procedure. The suggested method allows finding optimal parameters for the defined functional dependence of the reaction rate on the temperature and reactant concentrations. The dependence of combustion adiabatic temperature on equivalence ratio is assumed to be known from the flame equilibrium calculations. The global kinetic parameters of combustion reaction were determined for methane, ethylene and propane mixtures with air on the basis of experimental data on burning velocity as function of the equivalence ratio. The calculated overall kinetic parameters are compared with parameters obtained by other methods within similar global model.


2018 ◽  
Vol 17 (2) ◽  
pp. 03
Author(s):  
L. Pizzuti ◽  
C. A. Martins ◽  
L. R. Santos

This paper presents a very detailed description of a new cylindrical constant volume combustion chamber designed for laminar burning velocity determination of gaseous mixtures at ambient temperature and initial pressure up to 6 bar. The experimental setup, the experimental procedure and the determination of the range of flame radius for laminar burning determination are all described in details. The laminar burning velocity of twelve synthetic biogas mixtures has been studied. Initial pressure varying between 1 and 5 bar, equivalence ratios, f, between 0.7 and 1.1 and percentage dilution, with a mixture of CO2 and N2, between 35 and 55% have been considered. Five experiments were run for each mixture providing a maximum percentage standard deviation of 8.11%. However, for two third of the mixtures this value is lower than 3.55%. A comparison with simulation using PREMIX for both GRI-Mech 3.0 and San Diego mechanisms has provided closer agreement for mixtures with equivalence ratio closer to stoichiometry whereas for f = 0.7 the deviation is larger than 15% for all pressures. Mixtures with lower equivalence ratio, higher dilution percentage and higher initial pressure presents the lower values of laminar burning velocity.


Measurements of the burning velocities of methane, ethane, propane, butane, ethylene, carbon monoxide and cyanogen mixtures with air, in the range about 4 to 8 cm, are made by the flat-flame burner method with an accuracy of 2 to 3%. The results can be represented by a straight-line relationship between composition and burning velocity except for carbon monoxide which is sensitive to the percentage of water vapour present. Extrapolated values agree well with recent measurements of faster flames. Measurements are also made on binary mixtures with air of the gases, including hydrogen. The mixture law holds except with mixtures containing carbon monoxide. Limits of inflammability are also determined and the burning velocities at the limits average 3⋅6 cm/s. The mixtures obey the Le Chatelier rule accurately, except for carbon monoxide mixtures. The burning velocities of the hydrocarbons can be represented approximately by a straight-line relationship with the heat generated and with the maximum flame temperature, but correlation is best when thermal conductivity is introduced. At a given velocity the excess energy maintained by the flame appears to be constant for all the hydrocarbons investigated, except methane, which behaves slightly differently. The burning velocities of the hydrocarbons are controlled by a reaction which provides reasonable values of the activation energies and probably precedes the sudden development of chain branching.


1957 ◽  
Vol 1 (4) ◽  
pp. 420-430 ◽  
Author(s):  
W.G. Berl ◽  
E.L. Gayhart ◽  
E. Maier ◽  
H.L. Olsen ◽  
W.T. Renich
Keyword(s):  

1999 ◽  
Vol 38 (Part 1, No. 2A) ◽  
pp. 961-967 ◽  
Author(s):  
Yiguang Ju ◽  
Hongsheng Guo ◽  
Kaoru Maruta ◽  
Takashi Niioka

2016 ◽  
Vol 78 (10-2) ◽  
Author(s):  
Mohd Suardi Suhaimi ◽  
Aminuddin Saat ◽  
Mazlan A. Wahid ◽  
Mohsin Mohd Sies

Different methodology have been shown to produce different results for Markstein length and laminar burning velocity of methane-air mixture.This study attempts to determine the aforesaid parameters using the newly developed closed vessel combustion chamber with Schlieren photography. Markstein length and burning rate of methane-air mixture was determined under the initial pressure of 1 atm, temperature range of 298-302K and equivalence ratio range of 0.7-1.3. Experiments were performed in a centrally ignited 29.16L cylindrical constant volume combustion chamber. Ignition energy was set at 25mJ for each experiment. The images of spherically expanding flame were recorded using Schlieren photography technique at a speed of 2000 frame per second. Analysis of the flame area yield flame radii from which the flame speed and stretch rate could be obtained. These parameters would allow the determination of Markstein length and burning rate of the flame. Results show that Markstein length magnitude increases proportionally with equivalence ratio with a magnitude ranging from 0.125cm to 0.245cm. Maximum burning rate occurs at equivalence ratio of 1.1 with a magnitude of 0.366 m/s. Flame of each equivalence ratio also exhibits fluctuation arising from acoustic disturbance. This disturbance becomes more apparent at higher equivalence ratio.


Sign in / Sign up

Export Citation Format

Share Document