Treatment of cold rolling mill (CRM) effluent of steel industry

2021 ◽  
pp. 119083
Author(s):  
Pranjal P. Das ◽  
A. Anweshan ◽  
Mihir K. Purkait
Keyword(s):  
Cold Rolling ◽  
Steel Industry ◽  
Rolling Mill ◽  
Cold Rolling Mill

Developing an effective diagnosis for safety improvement in steelworks

2005 ◽  
Vol 4 (4) ◽  
pp. 229-240
Author(s):  
A.R. Hale ◽  
H.A. v.d. Waterbeemd ◽  
R. Potter ◽  
B.H. Heming ◽  
P.H.J.J. Swuste ◽  
...  
Keyword(s):  
Control System ◽  
Cold Rolling ◽  
Rolling Mill ◽  
Safety Management ◽  
Risk Control ◽  
Cold Rolling Mill ◽  
Rich Picture ◽  
Safety Improvement ◽  
Effective Diagnosis ◽  
Current Risk

The paper describes the methods used for a study of the safety management system and culture of a cold rolling mill in a steel plant. It uses data from diverse sources which can be validated against each other and combined to produce a rich picture of the current risk control system and its shortcomings. The paper also describes the proposed improvements and what the plant chose to implement. This step also throws light on the culture of the plant.

FEM Analysis of Profile Control Capability during Rolling in a 6-High CVC Cold Rolling Mill

2014 ◽  
Vol 988 ◽  
pp. 257-262 ◽  
Author(s):  
Ke Zhi Linghu ◽  
Zheng Yi Jiang ◽  
Fei Li ◽  
Jing Wei Zhao ◽  
Meng Yu ◽  
...  
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Rolling Force ◽  
Fem Analysis ◽  
Continuous Variable ◽  
Cold Rolling Mill ◽  
Strip Rolling ◽  
Roll Bending ◽  
Profile Control ◽  
Control Capability

A 3D elastic-plastic finite element method (FEM) model of cold strip rolling for 6-high continuous variable crown (CVC) rolling mill was developed. The rolling force distributions were obtained by the internal iteration processes. The calculated error has been significantly reduced by the developed model. the absolute error between the simulated results and the actual values is obtained to be less than 10μm, and relative error is less than 1%. The developed model is significant in investigating the profile control capability of the CVC cold rolling mill in terms of work roll bending, intermediate roll bending and intermediate roll shifting.

Optimization of the technological and thermal conditions in a reversing cold rolling mill

2015 ◽  
Vol 2015 (1) ◽  
pp. 30-35 ◽  
Author(s):  
E. A. Garber ◽  
A. E. Aleshin ◽  
S. S. Degtev ◽  
A. I. Traino
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Thermal Conditions ◽  
Cold Rolling Mill

Thickness Indirect Measurement Method for Direct Pulling Pilot Cold Rolling Mill

2011 ◽  
Vol 189-193 ◽  
pp. 2670-2674
Author(s):  
Zhi Jie Jiao ◽  
Chun Yu He ◽  
Jian Ping Li ◽  
Xiang Hua Liu
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Measurement Method ◽  
Rolling Process ◽  
Indirect Measurement ◽  
Cold Rolling Mill ◽  
Movement Data ◽  
Program Flow ◽  
New Type ◽  
Exit Speed

Pilot cold rolling mill is the important tool for the cold rolling process researching and new steel grade development. According to the design of the new type direct pulling pilot cold rolling mill, based on the mass flow constant principle, strip exit thickness indirect measurement method is studied. During rolling, strip entry and exit speed can be calculated accurately according to the measured value of two sides’ clamps movement. Data filtering treatment is adopted and program flow chart is designed. Based on the material entry thickness measured manually, exit thickness of all passes can be measured indirectly. This thickness indirect measurement method has been applied successfully on the new type pilot cold rolling mill, and the measurement results show that this method has a good accuracy.

The influence of medium-temperature electric tempering of cold rolling mill work rolls on their life

Metallurgist ◽  
1973 ◽  
Vol 17 (12) ◽  
pp. 885-888
Author(s):  
E. I. Treiger ◽  
M. V. Gedeon ◽  
A. Z. Komanovskii
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Cold Rolling Mill ◽  
Medium Temperature ◽  
Work Rolls
Sign in / Sign up

Export Citation Format

Share Document