Energy dissipation of rammed earth-timber joints under cyclic loading

2021 ◽  
Vol 145 ◽  
pp. 106728
Author(s):  
Yi Luo ◽  
Peisong Zhou ◽  
Huihuan Ma ◽  
Pengpeng Ni ◽  
Nan Ding ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Rammed Earth ◽  
Timber Joints

Comparing the Seismic Performance of Beam-Column Joints with and without SFRC when Subjected to Cyclic Loading

2012 ◽  
Vol 626 ◽  
pp. 85-89 ◽  
Author(s):  
Kay Dora Abdul Ghani ◽  
Nor Hayati Hamid
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Seismic Performance ◽  
Experimental Work ◽  
Concrete Beam ◽  
Steel Fiber ◽  
Precast Concrete ◽  
Experimental Results ◽  
Column Joint ◽  
Initial Cracks

The experimental work on two full-scale precast concrete beam-column corner joints with corbels was carried out and their seismic performance was examined. The first specimen was constructed without steel fiber, while second specimen was constructed by mixed up steel fiber with concrete and placed it at the corbels area. The specimen were tested under reversible lateral cyclic loading up to ±1.5% drift. The experimental results showed that for the first specimen, the cracks start to occur at +0.5% drifts with spalling of concrete and major cracks were observed at corbel while for the second specimen, the initial cracks were observed at +0.75% with no damage at corbel. In this study, it can be concluded that precast beam-column joint without steel fiber has better ductility and stiffness than precast beam-column joint with steel fiber. However, precast beam-column joint with steel fiber has better energy dissipation and fewer cracks at corbel as compared to precast beam-column joint without steel fiber.

scholarly journals Low-Cyclic Loading Tests of Self-Centering Variable Friction (SCVF) Brace

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Qingguang He ◽  
Yanxia Bai ◽  
Weike Wu ◽  
Yongfeng Du
Keyword(s):  
Finite Element ◽  
Friction Coefficient ◽  
Energy Dissipation ◽  
Cyclic Loading ◽  
Variable Friction ◽  
Loading Tests ◽  
Low Cyclic Loading ◽  
Energy Dissipation System ◽  
Cyclic Loading Tests ◽  
Dissipation System

A novel assembled self-centering variable friction (SCVF) brace is proposed which is composed of an energy dissipation system, a self-centering system, and a set of force transmission devices. The hysteretic characteristics and energy dissipation of the SCVF brace with various parameters from low-cyclic loading tests are presented. A finite element model was constructed and tested under simulated examination for comparative analysis. The results indicate that the brace shows an atypical flag-type hysteresis curve. The SCVF brace showed its stable self-centering ability and dissipation energy capacity within the permitted axial deformation under different spring and friction plates. A larger deflection of the friction plate will make the variable friction of this SCVF brace more obvious. A higher friction coefficient will make the energy dissipation capacity of the SCVF brace stronger, but the actual friction coefficient will be lower than the design value after repeated cycles. The results of the fatigue tests showed that the energy dissipation system formed by the ceramic fiber friction blocks and the friction steel plates in the SCVF brace has a certain stability. The finite element simulation results are essentially consistent with the obtained test results, which is conducive to the use of finite element software for calculation and structural analysis in actual engineering design.

Experimental study of precast beam-to-column joints with steel connectors under cyclic loading

2020 ◽  
Vol 23 (13) ◽  
pp. 2822-2834
Author(s):  
Xian Rong ◽  
Hongwei Yang ◽  
Jianxin Zhang
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Load Capacity ◽  
Precast Concrete ◽  
Displacement Ductility ◽  
Reversed Cyclic Loading ◽  
Column Joint ◽  
Energy Dissipation Capacity ◽  
Reversed Cyclic ◽  
The Web

This article investigated the seismic performance of a new type of precast concrete beam-to-column joint with a steel connector for easy construction. Five interior beam-to-column joints, four precast concrete specimens, and one monolithic joint were tested under reversed cyclic loading. The main variables were the embedded H-beam length, web plate or stiffening rib usage, and concrete usage in the connection part. The load–displacement hysteresis curves were recorded during the test, and the behavior was investigated based on displacement ductility, deformability, skeleton curves, stiffness degradation, and energy dissipation capacity. The results showed that the proposed beam-to-column joint with the web plate in the steel connector exhibited satisfactory behavior in terms of ductility, load capacity, and energy dissipation capacity under reversed cyclic loading, and the performance was ductile because of the yielding of the web plate. Therefore, the proposed joint with the web plate could be used in high seismic regions. The proposed joint without the web plate exhibited similar behavior to the monolithic specimen, indicating that this joint could be used in low or moderate seismic zones. Furthermore, the utilization of the web plate was vital to the performance of this system.

scholarly journals Experimental Analysis of Seismic Performance of Masonry Shear Wall Reinforced with PP-Band Mesh and Plastering Mortar under In-Plane Cyclic Loading

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Qiang Zhou ◽  
Lingyu Yang ◽  
Wenyang Zhao
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Bearing Capacity ◽  
Low Cost ◽  
Low Frequency ◽  
Masonry Wall ◽  
Ultimate Bearing Capacity ◽  
Masonry Walls ◽  
Seismic Capacity ◽  
Energy Dissipation Capacity

Masonry structures are widely used in developing countries due to their low cost and simple construction, especially in remote areas, where there are a large number of houses without seismic measures. These buildings are prone to collapse and cause a lot of casualties, even under the action of small earthquakes. For the reinforcement of this structure, a cheap, effective, and easy-to-construct reinforcement method is urgently needed. Therefore, this article studies the reinforcement method of polypropylene bands (PP-bands). We have carried out low-frequency cyclic loading tests for two PP-band reinforced masonry walls and two compared masonry walls. We mainly studied the influence of PP-band and different compressive strengths of plastering mortar on the masonry wall’s seismic capacity. The seismic indicators mainly studied in this article include ultimate bearing capacity, energy dissipation capacity, stiffness degradation, and hysteresis characteristics. The experimental results show that the PP-band can greatly enhance the seismic capacity of the masonry wall. The ultimate bearing capacity, energy dissipation capacity, and displacement ductility of the PP-band reinforced wall are increased by 38%–48%, 22%–47%, and 138%–226%.

Ductility and energy dissipation behavior of G20Mn5QT cast steel shear link beams under cyclic loading

2018 ◽  
Vol 149 ◽  
pp. 64-77 ◽  
Author(s):  
Lewei Tong ◽  
Yunfeng Zhang ◽  
Lyu Zhang ◽  
Heng Liu ◽  
Zhiping Zhang ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Cast Steel ◽  
Shear Link ◽  
G20mn5qt Cast Steel
Sign in / Sign up

Export Citation Format

Share Document