The influence of base doping density on the performance of evaporated poly-Si thin-film solar cells by solid-phase epitaxy

2010 ◽  
Vol 519 (1) ◽  
pp. 475-478 ◽  
Author(s):  
Song He ◽  
Joachim Janssens ◽  
Johnson Wong ◽  
Alistair B. Sproul
2010 ◽  
Vol 518 (15) ◽  
pp. 4351-4355 ◽  
Author(s):  
Song He ◽  
Johnson Wong ◽  
Daniel Inn ◽  
Bram Hoex ◽  
Armin G. Aberle ◽  
...  

2012 ◽  
Vol 358 (17) ◽  
pp. 2303-2307 ◽  
Author(s):  
Tobias Sontheimer ◽  
Eveline Rudigier-Voigt ◽  
Matthias Bockmeyer ◽  
Daniel Lockau ◽  
Carola Klimm ◽  
...  

2009 ◽  
Vol 17 (1) ◽  
pp. 35-46 ◽  
Author(s):  
O. Kunz ◽  
J. Wong ◽  
J. Janssens ◽  
J. Bauer ◽  
O. Breitenstein ◽  
...  

2007 ◽  
Vol 2007 ◽  
pp. 1-7 ◽  
Author(s):  
Per I. Widenborg ◽  
Armin G. Aberle

A new glass texturing method (AIT—aluminium-induced texturisation) has recently been developed by our group. In the present work, the potential of this method is explored by fabricating PLASMA poly-Si thin-film solar cells on glass superstrates that were textured with the AIT method. Using an interdigitated metallisation scheme with a full-area Al rear contact, PLASMA cells with an efficiency of up to 7% are realised. This promising result shows that the AIT glass texturing method is fully compatible with the fabrication of poly-Si thin-film solar cells on glass using solid phase crystallisation (SPC) of PECVD-deposited amorphous silicon precursor diodes. As such, there are now two distinctly different glass texturing methods—the AIT method and CSG Solar's glass bead method—that are known to be capable of producing efficient SPC poly-Si thin-film solar cells on glass.


2006 ◽  
Vol 45 (4B) ◽  
pp. 3516-3518 ◽  
Author(s):  
Shui-Yang Lien ◽  
Dong-Sing Wuu ◽  
Hsin-Yuan Mao ◽  
Bing-Rui Wu ◽  
Yen-Chia Lin ◽  
...  

2012 ◽  
Vol 49 (4) ◽  
pp. 043101
Author(s):  
邵彪 Shao Biao ◽  
张瑞英 Zhang Ruiying ◽  
赵春雨 Zhao Chunyu ◽  
董建荣 Dong Jianrong ◽  
杨辉 Yang Hui ◽  
...  

Crystals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 264 ◽  
Author(s):  
Mandana Jalali ◽  
Hamid Nadgaran ◽  
Daniel Erni

Plasmonic gratings provide effective photon management techniques in thin-film solar cells, capable of extending the optical thickness of the solar cell’s active layer. However, the ultra-broadband nature of such application makes an optimal design of the grating structure quite challenging, since a fully periodic grating operates only in specific spectral ranges. To achieve a more broadband design, semiperiodicity is introduced, which, due to having controllable disorder, is an apt solution in broadband optical applications. In this work, semiperiodic double gratings as a broadband photon management technique are introduced in order to improve the optical absorption of c-Si thin-film solar cells, and optimized through numerical structural optimization. Physical parameters of both front and back gratings are determined taking the spectrally integrated optical absorption as the figure of merit and subsequently a semiperiodic double grating is established through adding defects to the fully periodic structure. It is shown that such semiperiodic structure is capable of enhancing the spectrally integrated optical absorption 88.6 % compared to a reference structure without gratings.


1996 ◽  
Vol 452 ◽  
Author(s):  
M. Tanaka ◽  
S. Tsuge ◽  
S. Kiyama ◽  
S. Tsuda ◽  
S. Nakano

AbstractThe a-Si/poly-Si thin film tandem solar cell is a promising candidate for low-cost solar cells. We have conducted R&D on poly-Si thin film using the Solid Phase Crystallization (SPC) method from amorphous silicon (a-Si). To improve the film quality of SPC poly-Si, we have developed a new SPC method called the partial doping method. This method features two stacked starting a-Si layers, a P-doped layer and a non-doped layer. Nucleation occurs in the P-doped layer, and the non-doped layer is the crystal growth layer. For the nucleation layer, we developed a Si film with a unique structure, which features relatively large crystallites (-1000A) embedded in a matrix of amorphous tissue. By combining these technologies, a conversion efficiency of 9.2% was obtained for poly-Si thin-film solar cells. For further improvement in the conversion efficiency, based on the concept of “independent control of nucleation and crystal growth”, it is necessary to combine the best fabrication methods for each layer. A high conversion efficiency of more than 12% was found possible by using the CVD method and a new back surface reflection structure.


2009 ◽  
Vol 13 (3) ◽  
pp. 246-248 ◽  
Author(s):  
R. Muhida ◽  
A. G. E. Sutjipto ◽  
T. Toyama ◽  
H. Okamoto ◽  

Sign in / Sign up

Export Citation Format

Share Document