Use of ternary blends containing silica fume and fly ash to suppress expansion due to alkali–silica reaction in concrete

2002 ◽  
Vol 32 (3) ◽  
pp. 341-349 ◽  
Author(s):  
Medhat H Shehata ◽  
Michael D.A Thomas
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Ternary Blends

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

Assessment of binary and ternary blends of metakaolin and Class C fly ash for alkali-silica reaction mitigation in concrete

2010 ◽  
Vol 40 (12) ◽  
pp. 1664-1672 ◽  
Author(s):  
Robert D. Moser ◽  
Amal R. Jayapalan ◽  
Victor Y. Garas ◽  
Kimberly E. Kurtis
Keyword(s):  
Fly Ash ◽  
Alkali Silica Reaction ◽  
Ternary Blends ◽  
Class C

scholarly journals Durability of concrete containing ternary blends of high calcium fly ash and slag

2021 ◽  
Author(s):  
Seyon Kandasamy
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
Sulfate Attack ◽  
Alkali Silica Reaction ◽  
Ternary Blends ◽  
Fresh Properties ◽  
Freeze Thaw ◽  
Salt Scaling ◽  
High Calcium ◽  
High Calcium Fly Ash

This thesis investigates the performance of ternary blends containing high calcium fly ash (HCFA) and slag against: sulfate attack, alkali-silica reaction (ASR), salt scaling, and freeze-thaw damage. In addition, compressive strength, permeability and fresh properties were evaluated. In terms of sulfate attack, the performance of HCFA was significantly enhanced when slag was added to the mix, and the same was found for ASR. The high efficacy in resisting ASR of HCFA/slag blends was found to be a result of the blends' ability to bind and retain alkalis. Regarding the salt scaling, the tested ternary concretes failed the Ministry of Transportation Ontario limit, 0.8 kg/m²; however, enhanced performance was achieved when the samples were cured by wrapping with plastic sheets. Ternary blends achieved high resistance to freezing/thawing and less bleeding compared to those of the control mix without slag or HCFA; however, setting time was dragged by about an hour.

scholarly journals Sustainable and Durable Performance of Pozzolanic Additions to Prevent Alkali-Silica Reaction (ASR) Promoted by Aggregates with Different Reaction Rates

2020 ◽  
Vol 10 (24) ◽  
pp. 9042
Author(s):  
Esperanza Menéndez ◽  
Miguel Ángel Sanjuán ◽  
Ricardo García-Roves ◽  
Cristina Argiz ◽  
Hairon Recino
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Coal Fly Ash ◽  
Reaction Rates ◽  
Industrial Wastes ◽  
Accelerated Expansion ◽  
Alkali Silica Reaction ◽  
Natural Pozzolan ◽  
Blended Cements ◽  
Carbon Neutrality

The increased use of industrial wastes and by-products to produce concretes and blended cements is a lever to achieve carbon neutrality. Furthermore, they could improve their durability. Some pozzolanic additions can minimize the alkali-silica reaction (ASR), which is a well-known deleterious process that occurs between some reactive aggregates and the alkaline pore solution found in mortars and concretes. This work quantifies the efficiency of four pozzolanic materials (natural pozzolan, P, siliceous coal fly ash, V, silica fume, D, and blast-furnace slag, S) assessed by means of compressive strength testing, open porosity, ASR-expansion measurements, and SEM microscopy. Accelerated expansion tests were performed in mortar bars with a cement/sand ratio of 1/2.25 and a water/cement ratio of 0.47, two reactive aggregates and a non-reactive one. The major contributions of this paper are: (i) The more aggregate reactivity is, the higher ASR mitigation level was found when additions were added and (ii) The best additions for ASR inhibition are silica fume and fly ash.

scholarly journals Durability of concrete containing ternary blends of high calcium fly ash and slag

2021 ◽  
Author(s):  
Seyon Kandasamy
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
Sulfate Attack ◽  
Alkali Silica Reaction ◽  
Ternary Blends ◽  
Fresh Properties ◽  
Freeze Thaw ◽  
Salt Scaling ◽  
High Calcium ◽  
High Calcium Fly Ash

This thesis investigates the performance of ternary blends containing high calcium fly ash (HCFA) and slag against: sulfate attack, alkali-silica reaction (ASR), salt scaling, and freeze-thaw damage. In addition, compressive strength, permeability and fresh properties were evaluated. In terms of sulfate attack, the performance of HCFA was significantly enhanced when slag was added to the mix, and the same was found for ASR. The high efficacy in resisting ASR of HCFA/slag blends was found to be a result of the blends' ability to bind and retain alkalis. Regarding the salt scaling, the tested ternary concretes failed the Ministry of Transportation Ontario limit, 0.8 kg/m²; however, enhanced performance was achieved when the samples were cured by wrapping with plastic sheets. Ternary blends achieved high resistance to freezing/thawing and less bleeding compared to those of the control mix without slag or HCFA; however, setting time was dragged by about an hour.

Sign in / Sign up

Export Citation Format

Share Document