scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

scholarly journals Durability of concrete containing ternary blends of high calcium fly ash and slag

2021 ◽  
Author(s):  
Seyon Kandasamy
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
Sulfate Attack ◽  
Alkali Silica Reaction ◽  
Ternary Blends ◽  
Fresh Properties ◽  
Freeze Thaw ◽  
Salt Scaling ◽  
High Calcium ◽  
High Calcium Fly Ash

This thesis investigates the performance of ternary blends containing high calcium fly ash (HCFA) and slag against: sulfate attack, alkali-silica reaction (ASR), salt scaling, and freeze-thaw damage. In addition, compressive strength, permeability and fresh properties were evaluated. In terms of sulfate attack, the performance of HCFA was significantly enhanced when slag was added to the mix, and the same was found for ASR. The high efficacy in resisting ASR of HCFA/slag blends was found to be a result of the blends' ability to bind and retain alkalis. Regarding the salt scaling, the tested ternary concretes failed the Ministry of Transportation Ontario limit, 0.8 kg/m²; however, enhanced performance was achieved when the samples were cured by wrapping with plastic sheets. Ternary blends achieved high resistance to freezing/thawing and less bleeding compared to those of the control mix without slag or HCFA; however, setting time was dragged by about an hour.

scholarly journals Durability of concrete containing ternary blends of high calcium fly ash and slag

2021 ◽  
Author(s):  
Seyon Kandasamy
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
Sulfate Attack ◽  
Alkali Silica Reaction ◽  
Ternary Blends ◽  
Fresh Properties ◽  
Freeze Thaw ◽  
Salt Scaling ◽  
High Calcium ◽  
High Calcium Fly Ash

This thesis investigates the performance of ternary blends containing high calcium fly ash (HCFA) and slag against: sulfate attack, alkali-silica reaction (ASR), salt scaling, and freeze-thaw damage. In addition, compressive strength, permeability and fresh properties were evaluated. In terms of sulfate attack, the performance of HCFA was significantly enhanced when slag was added to the mix, and the same was found for ASR. The high efficacy in resisting ASR of HCFA/slag blends was found to be a result of the blends' ability to bind and retain alkalis. Regarding the salt scaling, the tested ternary concretes failed the Ministry of Transportation Ontario limit, 0.8 kg/m²; however, enhanced performance was achieved when the samples were cured by wrapping with plastic sheets. Ternary blends achieved high resistance to freezing/thawing and less bleeding compared to those of the control mix without slag or HCFA; however, setting time was dragged by about an hour.

Stabilization of Drilling Fluid Waste with Fly Ash

1986 ◽  
Vol 86 ◽  
Author(s):  
George M. Deeley ◽  
Larry W. Canter ◽  
Joakim G. Laguros
Keyword(s):  
Fly Ash ◽  
Caustic Soda ◽  
Drilling Fluid ◽  
Drilling Mud ◽  
Fly Ashes ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Water Based ◽  
Land Disposal ◽  
Drilling Muds

Water based drilling muds typically contain clays, barite, lime, caustic soda and other chemicals, such as polymers. Land disposal of these wastes raises the possibility of groundwater pollution which can be abated if the waste is stabilized either by chemical reaction or by solidification through some form of cementation. Many ASTM high-calcium (Class C) fly ashes are cementitious and thus may be useful in stabilization of drilling mud. The basic idea is to stabilize the clay-containing muds using the model of soil and roadbed stabilization with high-calcium fly ash [1]. Fly ash that is not utilized is considered to be a solid waste, so this application would would actually constitute codisposal of two wastes.

scholarly journals Adsorption of Se(IV) in aqueous solution by zeolites synthesized from fly ashes with different compositions

2019 ◽  
Vol 9 (4) ◽  
pp. 506-519
Author(s):  
Xiao Zhang ◽  
Xinyuan Li ◽  
Fan Zhang ◽  
Shaohao Peng ◽  
Sadam Hussain Tumrani ◽  
...  
Keyword(s):  
Fly Ash ◽  
Contact Time ◽  
High Capacity ◽  
Freundlich Isotherm ◽  
Fly Ashes ◽  
Order Model ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Equilibrium Data ◽  
Pseudo Second Order

Abstract Low-calcium fly ash (LC-F) and high-calcium fly ash (HC-F) were used to synthesize corresponding zeolites (LC-Z and HC-Z), then for adsorption of Se(IV) in water. The results showed that c zeolites can effectively adsorb Se(IV). The optimal adsorption conditions were set at contact time = 360 min; pH = 2.0; the amount of adsorbent = 5.0 g·L−1; temperature = 25 °C; initial Se(IV) concentration = 10 mg·L−1. The removal efficiency of HC-Z was higher than the LC-Z after it had fully reacted because the specific surface area (SSA) of HC-Z was higher than LC-Z. The adsorption kinetics model of Se(IV) uptake by HC-Z followed the pseudo-second-order model. The Freundlich isotherm model agreed better with the equilibrium data for HC-Z and LC-Z. The maximum Se(IV) adsorption capacity was 4.16 mg/g for the HC-Z and 3.93 mg/g for the LC-Z. For the coexisting anions, barely affected Se(IV) removal, while significant affected it. Regenerated zeolites still had high capacity for Se(IV) removal. In conclusion, zeolites synthesized from fly ashes are a promising material for adsorbing Se(IV) from wastewater, and selenium-loaded zeolite has the potential to be used as a Se fertilizer to release selenium in Se-deficient areas.

scholarly journals Geopolymer Mortar Incorporating High Calcium Fly Ash and Silica Fume

2019 ◽  
Vol 65 (1) ◽  
pp. 3-16 ◽  
Author(s):  
V.C. Prabha ◽  
V. Revathi
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Silica Fume ◽  
Sodium Hydroxide Solution ◽  
Test Results ◽  
Dense Microstructure ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Binder Ratio

AbstractAn attempt was made in the present work to study the compressive strength and microstructure of geopolymer containing high calcium fly ash (HCFA) and silica fume. Concentration of sodium hydroxide solution 8M, 10M, 12M & 14M, liquid to binder ratio 0.5 and sodium hydroxide to sodium silicate ratio 2.5 were selected for the mixes. Geopolymer mortar test results indicated that the mix with 40% silica fume by the weight of HCFA yielded higher compressive strength under ambient curing. The XRD pattern typically shows the major portion of amorphous phase of geopolymer. The existence of C-A-S-H gel, N-A-S-H gel and hydroxysodalite gel products were observed through SEM which developed dense microstructure and thus enhanced strength of HCFA and silica fume geopolymer.

Sign in / Sign up

Export Citation Format

Share Document