Effects of Palladium Particle Size in Hydrogenation of Carbon Dioxide to Methanol over Pd/ZnO Catalysts

Author(s):  
Deogseong Lee ◽  
Jun-Yearb Lee ◽  
Jae Sung Lee
2015 ◽  
Vol 5 (2) ◽  
pp. 869-881 ◽  
Author(s):  
Alejandro Karelovic ◽  
Patricio Ruiz

The size of copper nanoparticles exerts a significant influence on the selectivity of the hydrogenation of carbon dioxide to methanol.


Catalysts ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 155 ◽  
Author(s):  
András Erdőhelyi

The constant increase in the CO2 concentration in the atmosphere requires us to look for opportunities to convert CO2 into more valuable compounds. In this review, the activity and selectivity of different supported metal catalysts were compared in the hydrogenation of carbon dioxide, and found that Rh is one of the best samples. The possibility of the CO2 dissociation on clean metal and on supported Rh was discussed separately. The hydrogenation of CO2 produces mainly CH4 and CO, but the selectivity of the reaction is affected by the support, in some cases the reduction of the support, the particle size of Rh, and the different additives. At higher pressure methanol, ethanol, and acetic acid could be also formed. The activity of the various supported Rh catalysts was compared and the results obtained for TiO2-, SiO2-, and Al2O3-supported catalysts were discussed in a separate chapter. The compounds formed on the surface of the catalysts during the reaction are shown in detail; mostly, different CO species, adsorbed formate groups, and different carbonates were detected. In a separate chapter the mechanism of the reaction was also discussed.


2014 ◽  
Vol 18 (10) ◽  
pp. 1335-1345 ◽  
Author(s):  
Xuecheng Yan ◽  
Han Guo ◽  
Dongjiang Yang ◽  
Shilun Qiu ◽  
Xiangdong Yao

2021 ◽  
Vol 13 (4) ◽  
pp. 1866
Author(s):  
Noor Allesya Alis Ramli ◽  
Faradiella Mohd Kusin ◽  
Verma Loretta M. Molahid

Mining waste may contain potential minerals that can act as essential feedstock for long-term carbon sequestration through a mineral carbonation process. This study attempts to identify the mineralogical and chemical composition of iron ore mining waste alongside the effects of particle size, temperature, and pH on carbonation efficiency. The samples were found to be alkaline in nature (pH of 6.9–7.5) and contained small-sized particles of clay and silt, thus indicating their suitability for mineral carbonation reactions. Samples were composed of important silicate minerals needed for the formation of carbonates such as wollastonite, anorthite, diopside, perovskite, johannsenite, and magnesium aluminum silicate, and the Fe-bearing mineral magnetite. The presence of Fe2O3 (39.6–62.9%) and CaO (7.2–15.2%) indicated the potential of the waste to sequester carbon dioxide because these oxides are important divalent cations for mineral carbonation. The use of small-sized mine-waste particles enables the enhancement of carbonation efficiency, i.e., particles of <38 µm showed a greater extent of Fe and Ca carbonation efficiency (between 1.6–6.7%) compared to particles of <63 µm (0.9–5.7%) and 75 µm (0.7–6.0%). Increasing the reaction temperature from 80 °C to 150–200 °C resulted in a higher Fe and Ca carbonation efficiency of some samples between 0.9–5.8% and 0.8–4.0%, respectively. The effect of increasing the pH from 8–12 was notably observed in Fe carbonation efficiency of between 0.7–5.9% (pH 12) compared to 0.6–3.3% (pH 8). Ca carbonation efficiency was moderately observed (0.7–5.5%) as with the increasing pH between 8–10. Therefore, it has been evidenced that mineralogical and chemical composition were of great importance for the mineral carbonation process, and that the effects of particle size, pH, and temperature of iron mining waste were influential in determining carbonation efficiency. Findings would be beneficial for sustaining the mining industry while taking into account the issue of waste production in tackling the global carbon emission concerns.


Sign in / Sign up

Export Citation Format

Share Document