Among various mechanisms for enhancing the interfacial area between gases and liquids, a vertical liquid jet striking a still liquid is considered an effective method. This method has vast industrial and environmental applications, where a significant application of this method is to aerate industrial effluents and wastewater treatment. Despite the huge interest and experimental and numerical efforts made by the academic and scientific community in this topic, there is still a need of further study to realize improved theoretical and computational schemes to narrow the gap between the measured and the computed entrained air. The present study is a numerical attempt to highlight the air being entrained by water jet when it intrudes into a still water surface in a tank by the application of a Volume of Fluid (VOF) scheme. The VOF scheme, along with a piecewise linear interface construction (PLIC) algorithm, is useful to follow the interface of the air and water bubbly plume and thus can provide an estimate of the volume fraction for the gas and the liquid. Dimensionless scaling derived from the Fronde number and Reynolds number along with geometric similarities due to the liquid jet’s length and nozzle diameter have been incorporated to validate the experimental data on air entrainment, penetration and void fraction. The VOF simulations for void fraction and air-water mixing and air jet’s penetration into the water were found more comparable to the measured values than those obtained using empirical and Euler-Euler methods. Although, small overestimates of air entrainment rate compared to the experiments have been found, however, VOF was found effective in reducing the gap between measurements and simulations.
Volume of Fluid Computations of Gas Entrainment and Void Fraction for Plunging Liquid Jets to Aerate Wastewater
