Erratum to “Improvement in techniques for the determination of extensional rheological data from entrance flows: computational and experimental analysis” [J. Non-Newtonian Fluid Mech. 107 (2002) 13–37]

2003 ◽  
Vol 109 (1) ◽  
pp. 91
Author(s):  
Martin Zatloukal ◽  
Jiřı&#x; Vlček ◽  
Costas Tzoganakis ◽  
Petr Sáha
2016 ◽  
Vol 106 (05) ◽  
pp. 347-353
Author(s):  
A. Karim ◽  
A. Waibel ◽  
A. Lechler

Die Verbesserung der Bearbeitungsqualität stellt einen aktuellen Forschungsschwerpunkt bei der spanenden Bearbeitung mit Industrierobotern dar. Dabei hängt die Bearbeitungsqualität des Werkstücks wesentlich von der eingenommenen Pose des Roboters ab. Der Fachbeitrag stellt die Durchführung einer experimentellen Analyse zur Bestimmung der Bearbeitungsqualität in unterschiedlichen Posen vor. Erste Ergebnisse werden ebenfalls präsentiert.   The improvement of machining quality is an actual focus of research in the area of machining with industrial robots. The machining quality that can be achieved is strongly dependant on the robot‘s pose. In the course of this paper the execution of experimental analysis for the determination of machining quality at different poses as well as first results are presented.


2016 ◽  
pp. 01-06
Author(s):  
Prof. Vaishali Sarangpure

Centrifugation is one of the key unit undertakings in the sugar business. Usually it is used ensuing to thickening of the stick juice, for instance at a high consistency region. The makers are of the view that a sedimentation hub will have the most sensible. The structure features of centrifugals from cluster to steady sorts have been thinks broadly, their operational limits have in like manner been discussed with helpful application by a couple of workers. Beside centrifugation, the mechanical separation in like manner expect an important activity for removing corruptions obtain a comparably sterilized thing, Screening is furthermore a technique used in various structures in the sugar business. The speed keeps up could be around 8000 rpm in the extent of 70-75% mud soddenness. The material vehicle in such a hub can catch suspension particles. The size extent of 1-2µm. It can have a wide extent of feed stream, which can be evaluated dependent on a full-scale. All of these concentrations as discussed for a significant determination of centrifugation of stick juice in the sugar business.


Development ◽  
1968 ◽  
Vol 20 (1) ◽  
pp. 129-140
Author(s):  
A. A. Neyfakh ◽  
N. N. Rott

For studying nucleo-cytoplasmic relations during development various selective influences on the nucleus and cytoplasm are widely used as the main method of experimental analysis. However, the application of such techniques presents difficulties both in obtaining evidence that shows the specificity of a nuclear or cytoplasmic effect by a chosen agent and in the quantitative evaluation of the extent of damage. In this paper a method is described for differentiating between nuclear and cytoplasmic sites of action of a given agent as well as for evaluating quantitatively the extent of nuclear damage. The method is based on the determination of the morphogenetic activity of nuclei at different stages of embryonic development. As has been previously shown, after complete inactivation of nuclei (for instance, by heavy doses of radiation) development proceeds up to the stages programmed for by the genetic cell apparatus (Neyfakh, 1959, 1964).


1982 ◽  
Vol 42 (6) ◽  
pp. 618-620
Author(s):  
K. B. Kann ◽  
V. N. Feklistov

2019 ◽  
Vol 323 (1) ◽  
pp. 399-413 ◽  
Author(s):  
Anumaija Leskinen ◽  
Susanna Salminen-Paatero ◽  
Antti Räty ◽  
Merja Tanhua-Tyrkkö ◽  
Taneli Iso-Markku ◽  
...  

AbstractDetermination of 14C, 55Fe, 63Ni and gamma emitters in two different types of activated reactor pressure vessel (RPV) steel samples were carried out. The gamma emitters were analysed using HPGe detectors with ISOCS and standard geometry calibrations. Two radioanalytical procedures for the 14C, 55Fe, 63Ni analysis were developed using inactive samples and activated samples were analysed using modified procedures. A Monte Carlo code was used for the modelling of the activation results. The obtained measured and calculated results were comparable.


2016 ◽  
Vol 827 ◽  
pp. 57-60
Author(s):  
Ondřej Berka ◽  
Martin Dub ◽  
František Lopot ◽  
Vojtěch Dynybyl

This paper is focused on determination of load sharing in planetary transmission during the test and usual operation. Load sharing is one of examined items in transmission. That is investigation of power flow uniformity through satellites in planetary transmission.


Sign in / Sign up

Export Citation Format

Share Document