Virtual Work for Trusses

2022 ◽  
pp. 37-45
Keyword(s):  
Virtual Work

The Role of Norms in Virtual Work

2013 ◽  
Vol 12 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Karin S. Moser ◽  
Carolyn M. Axtell
Keyword(s):  
Virtual Work

On the Mechanical Behavior of the Orthotropic Cord-Rubber Composite

1976 ◽  
Vol 4 (4) ◽  
pp. 219-232 ◽  
Author(s):  
Ö. Pósfalvi
Keyword(s):  
Mechanical Behavior ◽  
Uniaxial Tension ◽  
Elastic Properties ◽  
Large Deformations ◽  
Virtual Work ◽  
Poisson's Ratio ◽  
Principle Of Virtual Work ◽  
Effective Elastic Properties ◽  
Rubber Composite ◽  
Mooney Equation

Abstract The effective elastic properties of the cord-rubber composite are deduced from the principle of virtual work. Such a composite must be compliant in the noncord directions and therefore undergo large deformations. The Rivlin-Mooney equation is used to derive the effective Poisson's ratio and Young's modulus of the composite and as a basis for their measurement in uniaxial tension.

Probabilistic multiscale modeling of fracture in heterogeneous materials and structures

2020 ◽  
Vol 86 (7) ◽  
pp. 45-54
Author(s):  
A. M. Lepikhin ◽  
N. A. Makhutov ◽  
Yu. I. Shokin
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Fracture Mechanics ◽  
Multiscale Modeling ◽  
Virtual Work ◽  
Numerical Models ◽  
Heterogeneous Materials ◽  
Heterogeneous Structure ◽  
Generalized Coordinates ◽  
Heterogeneous Structures

The probabilistic aspects of multiscale modeling of the fracture of heterogeneous structures are considered. An approach combining homogenization methods with phenomenological and numerical models of fracture mechanics is proposed to solve the problems of assessing the probabilities of destruction of structurally heterogeneous materials. A model of a generalized heterogeneous structure consisting of heterogeneous materials and regions of different scales containing cracks and crack-like defects is formulated. Linking of scales is carried out using kinematic conditions and multiscale principle of virtual forces. The probability of destruction is formulated as the conditional probability of successive nested fracture events of different scales. Cracks and crack-like defects are considered the main sources of fracture. The distribution of defects is represented in the form of Poisson ensembles. Critical stresses at the tops of cracks are described by the Weibull model. Analytical expressions for the fracture probabilities of multiscale heterogeneous structures with multilevel limit states are obtained. An approach based on a modified Monte Carlo method of statistical modeling is proposed to assess the fracture probabilities taking into account the real morphology of heterogeneous structures. A feature of the proposed method is the use of a three-level fracture scheme with numerical solution of the problems at the micro, meso and macro scales. The main variables are generalized forces of the crack propagation and crack growth resistance. Crack sizes are considered generalized coordinates. To reduce the dimensionality, the problem of fracture mechanics is reformulated into the problem of stability of a heterogeneous structure under load with variations of generalized coordinates and analysis of the virtual work of generalized forces. Expressions for estimating the fracture probabilities using a modified Monte Carlo method for multiscale heterogeneous structures are obtained. The prospects of using the developed approaches to assess the fracture probabilities and address the problems of risk analysis of heterogeneous structures are shown.

Dynamic modeling of a galloping structure equipped with piezoelectric wafers and energy harvesting

2019 ◽  
Vol 67 (3) ◽  
pp. 142-154 ◽  
Author(s):  
M. Y. Abdollahzadeh Jamalabadi ◽  
Moon K. Kwak
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Vibrational Energy ◽  
Virtual Work ◽  
Power Level ◽  
Closed Form Solutions ◽  
Multi Scale ◽  
Rigid Mass ◽  
Piezoelectric Wafer ◽  
Piezoelectric Wafers

This study presents the analytical solution and experimental investigation of the galloping energy harvesting from oscillating elastic cantilever beam with a rigid mass. A piezoelectric wafer was attached to galloping cantilever beam to harvest vibrational energy in electric charge form. Based on Euler-Bernoulli beam assumption and piezoelectric constitutive equation, kinetic energy and potential energy of system were obtained for the proposed structure. Virtual work by generated charge and galloping force applied onto the rigid mass was obtained based on Kirchhoff's law and quasistatic assumption. Nonlinear governing electro-mechanical equations were then obtained using Hamilton's principle. As the system vibrates by self-exciting force, the fundamental mode is the only one excited by galloping. Hence, multi-degreeof-freedom equation of motion is simplified to one-degree-of-freedom model. In this study, closed-form solutions for electro-mechanical equations were obtained by using multi-scale method. Using these solutions, we can predict galloping amplitude, voltage amplitude and harvested power level. Numerical and experimental results are presented and discrepancies between experimental and numerical results are fully discussed.

Virtual Work & d’Alembert’s Principle

2018 ◽  
Author(s):  
Peter Mann
Keyword(s):  
Euler Equations ◽  
Virtual Work ◽  
Lagrange Equation ◽  
Classical Mechanics ◽  
Rigid Bodies ◽  
Gibbs Function ◽  
Constraint Force ◽  
Appell Equations ◽  
Jourdain's Principle ◽  
D'alembert's Principle

This chapter discusses virtual work, returning to the Newtonian framework to derive the central Lagrange equation, using d’Alembert’s principle. It starts off with a discussion of generalised force, applied force and constraint force. Holonomic constraints and non-holonomic constraint equations are then investigated. The corresponding principles of Gauss (Gauss’s least constraint) and Jourdain are also documented and compared to d’Alembert’s approach before being generalised into the Mangeron–Deleanu principle. Kane’s equations are derived from Jourdain’s principle. The chapter closes with a detailed covering of the Gibbs–Appell equations as the most general equations in classical mechanics. Their reduction to Hamilton’s principle is examined and they are used to derive the Euler equations for rigid bodies. The chapter also discusses Hertz’s least curvature, the Gibbs function and Euler equations.

scholarly journals Discrete element model for general polyhedra

2021 ◽  
Author(s):  
Alfredo Gay Neto ◽  
Peter Wriggers
Keyword(s):  
Frictional Contact ◽  
Virtual Work ◽  
Particle Surface ◽  
Element Model ◽  
Discrete Element ◽  
Discrete Element Model ◽  
Principle Of Virtual Work ◽  
Dynamics Model ◽  
Railway Ballast ◽  
Multibody Dynamics Model

AbstractWe present a version of the Discrete Element Method considering the particles as rigid polyhedra. The Principle of Virtual Work is employed as basis for a multibody dynamics model. Each particle surface is split into sub-regions, which are tracked for contact with other sub-regions of neighboring particles. Contact interactions are modeled pointwise, considering vertex-face, edge-edge, vertex-edge and vertex-vertex interactions. General polyhedra with triangular faces are considered as particles, permitting multiple pointwise interactions which are automatically detected along the model evolution. We propose a combined interface law composed of a penalty and a barrier approach, to fulfill the contact constraints. Numerical examples demonstrate that the model can handle normal and frictional contact effects in a robust manner. These include simulations of convex and non-convex particles, showing the potential of applicability to materials with complex shaped particles such as sand and railway ballast.

Exploring the adoption of virtual work: the role of virtual work self-efficacy and virtual work climate

2021 ◽  
pp. 1-34
Author(s):  
Mladen Adamovic ◽  
Peter Gahan ◽  
Jesse Olsen ◽  
Andre Gulyas ◽  
David Shallcross ◽  
...  
Keyword(s):  
Self Efficacy ◽  
Virtual Work ◽  
Work Climate

A PD Computed Torque Control Method with Online Self-gain Tuning for a 3UPS-PS Parallel Robot

Robotica ◽  
2021 ◽  
pp. 1-13
Author(s):  
Xiaogang Song ◽  
Yongjie Zhao ◽  
Chengwei Chen ◽  
Liang’an Zhang ◽  
Xinjian Lu
Keyword(s):  
Feedback Loop ◽  
Control Method ◽  
Virtual Work ◽  
Parallel Robot ◽  
Torque Control ◽  
Virtual Work Principle ◽  
Tuning Method ◽  
Computed Torque Control ◽  
Control Feedback ◽  
Computed Torque

SUMMARY In this paper, an online self-gain tuning method of a PD computed torque control (CTC) is used for a 3UPS-PS parallel robot. The CTC is applied to the 3UPS-PS parallel robot based on the robot dynamic model which is established via a virtual work principle. The control system of the robot comprises a nonlinear feed-forward loop and a PD control feedback loop. To implement real-time online self-gain tuning, an adjustment method based on the genetic algorithm (GA) is proposed. Compared with the traditional CTC, the simulation results indicate that the control algorithm proposed in this study can not only enhance the anti-interference ability of the system but also improve the trajectory tracking speed and the accuracy of the 3UPS-PS parallel robot.

Sign in / Sign up

Export Citation Format

Share Document