The dynamics of confined extensional flows

2016 ◽  
Vol 804 ◽  
pp. 24-57 ◽  
Author(s):  
Samuel S. Pegler
Keyword(s):  
Shear Stresses ◽  
Fluid Films ◽  
Glacial Ice ◽  
Ice Shelves ◽  
Channel Exit ◽  
Constant Rate ◽  
Channel Velocity ◽  
Transverse Shear Stresses ◽  
Surface Profiles ◽  
Channel Lengths

I present a theoretical and experimental study of floating viscous fluid films introduced into a channel of finite length, motivated by the flow of glacial ice shelves. The dynamics are characterized by a mixture of viscous extensional stresses, transverse shear stresses and a driving buoyancy force. A theory based on a width-integrated model is developed and investigated using analytical, asymptotic and numerical methods. With fluid introduced at a constant rate, the flow is found to approach a steady state with two possible asymptotic forms depending on the length of the channel. For channel lengths less than half the width, the flow is similar to a purely extensional one-dimensional flow, characterized by concave surface profiles and being insensitive to the position of the channel exit (or calving front). Greater lengths result in a more complex asymptotic structure in which the flow adjusts over a short distance towards a prevailing flow of universal dimensionless form. In complete contrast to the extensional regime, the prevailing flow is controlled by the position of the channel exit. Data from a new laboratory experiment involving particle velocimetry of a floating fluid film compares well with the predicted along-channel velocity. Motivated by glaciological application, the analysis is generalized to power-law rheologies and the results used to classify the flow regimes of a selection of ice shelves. The prediction for the frontal speed is in good agreement with geophysical data, indicating that the universal profile predicted by the theory is common in nature.

Determination of the transverse shear stress in layered composites

2020 ◽  
Vol 86 (2) ◽  
pp. 44-53
Author(s):  
Yu. I. Dudarkov ◽  
M. V. Limonin
Keyword(s):  
Shear Stress ◽  
Transverse Shear ◽  
Composite Beam ◽  
Layered Composite ◽  
Equivalent Model ◽  
Shear Stresses ◽  
Transverse Shear Stress ◽  
Layered Composites ◽  
Laminate Composites ◽  
Transverse Shear Stresses

An engineering approach to estimation of the transverse shear stresses in layered composites is developed. The technique is based on the well-known D. I. Zhuravsky equation for shear stresses in an isotropic beam upon transverse bending. In general, application of this equation to a composite beam is incorrect due to the heterogeneity of the composite structure. According to the proposed method, at the first stage of its implementation, a transition to the equivalent model of a homogeneous beam is made, for which the Zhuravsky formula is valid. The transition is carried out by changing the shape of the cross section of the beam, provided that the bending stiffness and generalized elastic modulus remain the same. The calculated shear stresses in the equivalent beam are then converted to the stress values in the original composite beam from the equilibrium condition. The main equations and definitions of the method as well as the analytical equation for estimation of the transverse shear stress in a composite beam are presented. The method is verified by comparing the analytical solution and the results of the numerical solution of the problem by finite element method (FEM). It is shown that laminate stacking sequence has a significant impact both on the character and on the value of the transverse shear stress distribution. The limits of the applicability of the developed technique attributed to the conditions of the validity of the hypothesis of straight normal are considered. It is noted that under this hypothesis the shear stresses do not depend on the layer shear modulus, which explains the absence of this parameter in the obtained equation. The classical theory of laminate composites is based on the similar assumptions, which gives ground to use this equation for an approximate estimation of the transverse shear stresses in in a layered composite package.

Stress Singularity of Edge Delamination in Angle-Ply and Cross-Ply Laminates

1997 ◽  
Vol 64 (3) ◽  
pp. 525-531 ◽  
Author(s):  
Wen-Hwa Chen ◽  
Tain-Fu Huang
Keyword(s):  
Transverse Shear ◽  
Axial Strain ◽  
Stress Singularity ◽  
Shear Stresses ◽  
Explicit Solutions ◽  
Real Constant ◽  
Stress Singularities ◽  
General Solutions ◽  
Transverse Shear Stresses ◽  
Edge Delamination

By utilizing the general solutions derived for the plies with arbitrary fiber orientations under uniform axial strain (Huang and Chen, 1994), the explicit solutions of the edge-delamination stress singularities for the angle-ply and cross-ply laminates are obtained. The dominant edge-delamination stress singularities for the angle-ply laminates are found to be a real constant, −1/2, and a pair of complex conjugates, −1/2±i/2πln{(b+b2−a2)/a}. For the cross-ply laminates, the significant effect of transverse shear stresses of the laminate is considered and the dominant edge-delamination stress singularities are shown as −1/2 and −1/2±i/2πln{(c2+c22−4c1c3)/2c1}. a, b, cl, c2, and c3 are the corresponding combined complex constants. In addition, two elementary forms of edge-delamination stress singularity, say, r−1/2 and rδr(lnr)n(δr=n−3/2,n=1,2...) exist for both the angle-ply and cross-ply laminates. Excellent correlations between the present results and available solutions show the validity of the approach. The deficiencies of the solutions available in the literature are compensated. New results for other angle-ply and cross-ply laminates are also provided.

Effect of Stress Concentration on Laminated Plates

2012 ◽  
Vol 29 (2) ◽  
pp. 241-252 ◽  
Author(s):  
A. S. Sayyad ◽  
Y. M. Ghugal
Keyword(s):  
Stress Concentration ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Laminated Plates ◽  
Shear Stresses ◽  
Normal Strain ◽  
Concentrated Load ◽  
Transverse Shear Stresses

AbstractThis paper deals with the problem of stress distribution in orthotropic and laminated plates subjected to central concentrated load. An equivalent single layer trigonometric shear deformation theory taking into account transverse shear deformation effect as well as transverse normal strain effect is used to obtain in-plane normal and transverse shear stresses through the thickness of plate. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. A simply supported plate with central concentrated load is considered for the numerical analysis. Anomalous behavior of inplane normal and transverse shear stresses is observed due to effect of stress concentration compared to classical plate theory and first order shear deformation theory.

A C0 three-node triangular element based on preprocessing approach for thick sandwich plates

2017 ◽  
Vol 21 (6) ◽  
pp. 1820-1842
Author(s):  
Wu Zhen ◽  
Ma Rui ◽  
Chen Wanji
Keyword(s):  
Transverse Shear ◽  
Equilibrium Equation ◽  
Three Dimensional ◽  
Higher Order ◽  
Triangular Element ◽  
Shear Stresses ◽  
Sandwich Plates ◽  
Transverse Shear Stress ◽  
Transverse Shear Stresses ◽  
Derivatives Of

This paper will try to overcome two difficulties encountered by the C0 three-node triangular element based on the displacement-based higher-order models. They are (i) transverse shear stresses computed from constitutive equations vanish at the clamped edges, and (ii) it is difficult to accurately produce the transverse shear stresses even using the integration of the three-dimensional equilibrium equation. Invalidation of the equilibrium equation approach ought to attribute to the higher-order derivations of displacement parameters involved in transverse shear stress components after integrating three-dimensional equilibrium equation. Thus, the higher-order derivatives of displacement parameters will be taken out from transverse shear stress field by using the three-field Hu–Washizu variational principle before the finite element procedure is implemented. Therefore, such method is named as the preprocessing method for transverse shear stresses in present work. Because the higher-order derivatives of displacement parameters have been eliminated, a C0 three-node triangular element based on the higher-order zig-zag theory can be presented by using the linear interpolation function. Performance of the proposed element is numerically evaluated by analyzing multilayered sandwich plates with different loading conditions, lamination sequences, material constants and boundary conditions, and it can be found that the present model works well in the finite element framework.

Bending Analysis of SMA Embedded Rectangular Laminated Sandwich Plates with Soft Core Using 3D Finite Element Method

2011 ◽  
Vol 110-116 ◽  
pp. 1458-1465 ◽  
Author(s):  
M. Khadem ◽  
M. M. Kheirikhah
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Transverse Shear ◽  
Soft Core ◽  
Shear Stresses ◽  
Sandwich Plates ◽  
3D Finite Element ◽  
Bending Analysis ◽  
Transverse Shear Stresses ◽  
3D Finite Element Method

Nowadays Shape Memory Alloys (SMAs) are used as actuators in many applications such as aerospace structures. In sandwich structures, the SMA wires or plates are used in the skins for shape control of the structure or vibration damping. In this paper, bending behavior of sandwich plates with embedded SMA wires in their skins is studied. 3D finite element method is used for construction and analysis of the sandwich plate with a flexible core and two stiff skins. Some important points such as continuity conditions of the displacements, satisfaction of interlaminar transverse shear stresses, the conditions of zero transverse shear stresses on the upper and lower surfaces and in-plane and transverse flexibility of soft core are considered for accurate modeling and analysis of sandwich structures. Solution for bending analysis of sandwich plates under various transverse loads are presented and the effect of many parameters such as plate dimensions, loading conditions, material properties of core, skins and SMA wires are studied. Comparison of the present results in special case with those of the three-dimensional theory of elasticity and some plate theories confirms the accuracy of the proposed model.

Nonlinear Theory for Composite Laminated Shells With Interfacial Damage

1998 ◽  
Vol 65 (3) ◽  
pp. 711-718 ◽  
Author(s):  
Zhen-qiang Cheng ◽  
S. Kitipornchai
Keyword(s):  
Nonlinear Theory ◽  
Virtual Work ◽  
Shear Stresses ◽  
Interfacial Damage ◽  
Laminated Shells ◽  
Lines Of Curvature ◽  
Perfect Bonding ◽  
Transverse Shear Stresses ◽  
Bounding Surfaces ◽  
Special Case

Interfacial damage is incorporated in the proposed nonlinear theory. for composite laminated shells. A spring-layer model is employed to characterize damaged interfaces spanning from perfect bonding to different degrees of imperfect bonding in shear. By enforcing compatibility conditions for transverse shear stresses both at interfaces and on two bounding surfaces of a laminated shell, only five unknowns are needed for modeling its behavior. The principle of virtual work is used to derive the governing equations, which are of 14th order in lines of curvature coordinates, variationally self-consistent with seven prescribed boundary conditions. This theory includes the conventional higher-order zigzag model for a perfectly bonded shell as a special case. Numerical results provide a physical understanding of the effect of interracial damage on bending and buckling responses of composite laminated shells.

Mathematical models for quantifying flexible multilayer orthotropic shells under transverse shear stresses

2018 ◽  
Vol 204 ◽  
pp. 896-911 ◽  
Author(s):  
J. Awrejcewicz ◽  
V.A. Krysko ◽  
M.V. Zhigalov ◽  
I.V. Papkova ◽  
V.A. Krysko
Keyword(s):  
Mathematical Models ◽  
Transverse Shear ◽  
Shear Stresses ◽  
Transverse Shear Stresses ◽  
Orthotropic Shells

Structural Analysis of Variable Stiffness Laminated Plates Using First-Order Shear Deformation Theory

2014 ◽  
Author(s):  
A. H. Akbarzadeh ◽  
M. Arian Nik ◽  
D. Pasini
Keyword(s):  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Variable Stiffness ◽  
Buckling Load ◽  
Shear Stresses ◽  
Critical Buckling Load ◽  
First Order ◽  
Stiffness Design ◽  
Transverse Shear Stresses

Constant and variable stiffness strategies have been developed to design a composite laminate. With the former, each layer is designed with straight fibers that have the highest stiffness and strength in the fiber direction. With the latter, on the other hand, the stiffness can change within each layer by placing the fibers along a curvilinear fiber path. A variable stiffness design results in improved structural performance, as well as opens up opportunities to search for trade-off among structural properties. During the manufacture of a variable stiffness design with Automated Fiber Placement, certain defects in the form of gaps and overlaps could appear within the laminate and affect the laminate performance. In this study, we use the first-order shear deformation theory to assess the effect of transverse shear stresses on the critical buckling load, free and forced vibration of a variable stiffness laminate with embedded defects, an issue so far rarely examined in literature. The governing differential equations for the static analysis are first derived. A semi-analytic solution is then obtained using the hybrid Fourier-Galerkin method and the numeric time integration technique. The eigenvalue analysis is also conducted to determine the fundamental frequency and critical buckling load of the plate. It is found that the behavior of a variable stiffness plate is much more affected by the shear stresses than a constant stiffness plate. Ignoring the effect of transverse shear stresses results in 34% error in the predicted buckling load of a variable stiffness laminate with overlaps and a length-to-thickness ratio of 10.

Sign in / Sign up

Export Citation Format

Share Document