Analysis of QTLs for the micromorphology on the seed coat surface of soybean using recombinant inbred lines

2015 ◽  
Vol 25 (4) ◽  
pp. 409-415 ◽  
Author(s):  
Kazunori Otobe ◽  
Satoshi Watanabe ◽  
Kyuya Harada

AbstractThe seed coat of soybean (Glycine max (L.) Merrill) must protect the seed but allow water intake. Overprotection, causing impermeability, is assumed to be due to the presence of an impermeable layer in the seed coat, although validation of this assumption has relied on imbibition testing, which tends to be influenced by microfractures in the seed coat. Recent micromorphological analyses using laser-assisted topography microscopy revealed links to the surface roughness (SR) of the seed coat. To verify genetic links between hardseededness and SR, we analysed quantitative trait loci (QTLs) governing SR formation using 148 recombinant inbred lines (RILs) with a genetic linkage map covering 2663.6 cM of all 20 linkage groups of soybean, with 355 DNA markers and 5 phenotype markers. Five QTLs were detected, including previously identified hardseededness QTLs for ratio of seeds absorbing water, namely RAS1 and RAS2, which accounted for 20% of the phenotypic variance, and one near a locus inhibiting seed coat colour (I). These results indicate that the impermeability of soybean seed is genetically related to the reduction of SR.

Author(s):  
R. B. Shingare ◽  
V. P. Chimote ◽  
M. P. Deshmukh ◽  
T. J. Bhor ◽  
A. A. Kale

Background: In soybean yellow seed coat is preferred in the market, however, colored ones are currently gaining attention because of their medicinal and nutritive values; besides. Hence it is essential to breed varieties with desired seed coat colour. Methods: Twelve genotypes with six each having yellow and black seed coats were screened with fourteen primers linked to seed coat colour governing loci. Result: Out of them twelve primers showed polymorphism. Monomorphism was observed with both T loci specific and two of the three R loci specific primers. However I locus specific primers i.e. SM303, SM305 and TR showed polymorphism shared by their seed coat color. SM303 amplified a 180 bp sized band in yellow seed coated genotypes and a 130 bp band in black seed coated genotypes. SM305 amplified dual bands with a 200bp band being monomorphic and an additional band (192-216 bp range) present in only yellow seed coated genotypes, of which a 208 bp band was shared by four yellow seed coated genotypes. Cold induced seed coat discoloration specific TR primer generated bands of different size ranges in yellow seed coated (336-344 bp) and black seed coated genotypes (300-320), of which a 340 bp band was shared by four yellow seed coated genotypes.


Author(s):  
P. V. Pawar ◽  
R. M. Naik ◽  
M. P. Deshmukh ◽  
R. D. Satbhai ◽  
S. G. Mohite

The soybean seed is highly susceptible to field weathering and mechanical damage which adversely affect its longevity. Mechanical injury can occur at any time during harvesting, drying and storage conditioning of seeds. The seed coat color and leachate conductivity of soybean has been correlated with seed longevity and black seed coat color has been reported to be positively correlated with better seed longevity. In order to understand the physico-chemical attributes related to soybean seed longevity, biochemical and molecular analysis of the parents exhibiting black (Birsasoya-1) and yellow seed coat colour (EC 241780) and the eleven F3 progenies of the cross exhibiting brown, yellow and black seed coat colour was carried out. The results revealed that vita-E, lignin, calcium content and activity of antioxidative enzymes appeared to be positively correlated with soybean seed longevity and levels were higher in black and brown seed coat color progenies. The lipid peroxidation rate was inversely related to membrane injury caused by ROS and comparatively much less lipid peroxidation rate was recorded in black and brown seed coat colour parents and progenies having better seed longevity. The SSR primers Satt162, Satt523 and Satt453 which are either linked with seed coat colour and seed permeability exhibited a specific size allelic fragments in soybean genotypes and crosses with better seed longevity.


2017 ◽  
Vol 3 (2) ◽  
pp. 224-235 ◽  
Author(s):  
Nacer Bellaloui ◽  
Laila Khandaker ◽  
Masum Akond ◽  
Stella K. Kantartzi ◽  
Khalid Meksem ◽  
...  

Research of quantitative trait loci (QTL) for macronutrient accumulation in soybean seed is limited. Therefore, the objective of this research was to identify QTL related to macronutrients (N, C, S, P, K, Ca, and Mg) in seeds in 92 F5:7 recombinant inbred lines (RILs) developed from a cross between MD 96-5722 (MD) and Spencer using a total 5,376 Single Nucleotide Polymorphism (SNP) markers. A genetic linkage map based on SNP markers was constructed using the Illumina Infinium SoySNP6K BeadChip Array. The RILs were genotyped using 537 polymorphic, reliably segregating SNP markers. A total of 8 QTL for K (qPOT001-qPOT008) were identified on LGs D1b (Chr 1), N (Chr 3), A1 (Chr 5), O (Chr 10), F (Chr 13), B2 (Chr 14), and J (Chr 16). Four QTL for Mg (qMAG001-qMAG004) were identified on LGs N (Chr 3), A1 (Chr 5), J (Chr 16), and G (Chr 18). One QTL for P (qPHO001), one for C on LG J (Chr 16), one for N (qNIT001) and S (qSUL001) on the same LG J (Chr 16), and one QTL for Ca (qCAL001) on LG G (Chr 18). K and Mg QTL were clustered together on LG A1 (Chr 5) with a peak position of 9.50 cM and  LOD support interval of 8.50-9.50 cM. Similar observation was noticed for P, K, Mg, C, N, and S, where the QTL were clustered on LG J (Chr 16) with peak position of 11 cM for K, P, and S, and 10 cM for C and N, and 12 cM for Mg. The LOD support intervals for all these clustered QTL were between 8.90 and 12.30 cM. The QTL clustering of these nutrients suggests possible common physiological and genetic relationships, suggesting possible similar metabolic processes and pathways  for these nutrients. The inverse relationships between N:S ratio and all nutrients suggest possible use of N:S ratio as a measure for higher nutrients accumulation in seed. Since most of QTL identified in this study were not previously reported, this research will further help breeders to improve nutrient accumulation in seeds and contribute to our understanding of the physiological and genetic bases of seed nutrition quality.


2009 ◽  
Vol 60 (4) ◽  
pp. 353 ◽  
Author(s):  
R. Díaz-Ruiz ◽  
Z. Satovic ◽  
C. M. Ávila ◽  
C. M. Alfaro ◽  
M. V. Gutierrez ◽  
...  

Ascochyta blight, caused by Ascochyta fabae Speg., is a disease of faba bean (Vicia faba L.) of worldwide distribution. In this study we have conducted an experiment on Ascochyta fabae resistance in 165 recombinant inbred lines (RILs) developed by single-seed descent from the cross between resistant and susceptible lines (Vf6 × Vf136) in which A. fabae resistance QTLs (quantitative trait loci) have been previously reported in the original F2 population. Recombinant inbred lines were inoculated under controlled growth chamber conditions and evaluated for disease severity and infection type index. The linkage map was constructed by MAPMAKER V2.0 and the QTL analysis was carried out using QTL Cartographer. Two hundred and seventy-seven markers (238 RAPDs, 4 isozymes, 5 ESTs, 1 SCAR, 6 SSRs, 2 STSs, and 21 intron-spanning markers) mapped into 21 linkage groups covering 2.856.7 cM, with a mean inter-marker distance of 12.72 cM. Composite interval mapping identified two zones of putative QTL action in the RIL population for DSL (disease severity on leaves) and DSS (disease severity on stems) traits. Putative QTLs (Af1 and Af2) were identified on chromosome 3 and chromosome 2, respectively, and jointly explained 24% of the phenotypic variance of DSL and 16% of DSS. With this study we have (1) confirmed the QTLs for ascochyta blight resistance found in F3 families in the derived RILs (F6), (2) re-estimated their position and genetic effects, and (3) assessed the stability of these QTLs in different genetic backgrounds by comparison of the mapping data with a previous QTL study.


2019 ◽  
Vol 79 (01S) ◽  
Author(s):  
M. A. Saleem ◽  
G. K. Naidu ◽  
H. L. Nadaf ◽  
P. S. Tippannavar

Spodoptera litura an important insect pest of groundnut causes yield loss up to 71% in India. Though many effective chemicals are available to control Spodoptera, host plant resistance is the most desirable, economic and eco-friendly strategy. In the present study, groundnut mini core (184), recombinant inbred lines (318) and elite genotypes (44) were studied for their reaction to Spodoptera litura under hot spot location at Dharwad. Heritable component of variation existed for resistance to Spodoptera in groundnut mini core, recombinant inbred lines and elite genotypes indicating scope for selection of Spodoptera resistant genotypes. Only 29 (15%) genotypes belonging to hypogaea, fastigiata and hirsuta botanical varieties under mini core set, 15 transgressive segregants belonging to fastigiata botanical variety among 318 recombinant inbred lines and three genotypes belonging to hypogaea and fastigiata botanical varieties under elite genotypes showed resistance to Spodoptera litura with less than 10% leaf damage. Negative correlation existed between resistance to Spodoptera and days to 50 per cent flowering indicating late maturing nature of resistant genotypes. Eight resistant genotypes (ICG 862, ICG 928, ICG 76, ICG 2777, ICG 5016, ICG 12276, ICG 4412 and ICG 9905) under hypogaea botanical variety also had significantly higher pod yield. These diverse genotypes could serve as potential donors for incorporation of Spodoptera resistance in groundnut.


Sign in / Sign up

Export Citation Format

Share Document