Pillar Cuvettes: Capillary-Filled, Microliter Quartz Cuvettes with Microscale Path Lengths for Optical Spectroscopy

2015 ◽  
Vol 87 (9) ◽  
pp. 4757-4764 ◽  
Author(s):  
Gregor Holzner ◽  
Frederik Hermanus Kriel ◽  
Craig Priest
Author(s):  
John W. Andrew ◽  
F.P. Ottensmeyer ◽  
E. Martell

Energy selecting electron microscopes of the Castaing-Henry prism-mirror-prism design suffer from a loss of image and energy resolution with increasing field of view. These effects can be qualitatively understood by examining the focusing properties of the prism shown in Fig. 1. A cone of electrons emerges from the entrance lens crossover A and impinges on the planar face of the prism. The task of the prism is to focus these electrons to a point B at a focal distance f2 from the side of the prism. Electrons traveling in the plane of the diagram (i.e., the symmetry plane of the prism) are focused toward point B due to the different path lengths of different electron trajectories in the triangularly shaped magnetic field. This is referred to as horizontal focusing; the better this focusing effect the better the energy resolution of the spectrometer. Electrons in a plane perpendicular to the diagram and containing the central ray of the incident cone are focused toward B by the curved fringe field of the prism.


Author(s):  
J N Chapman ◽  
W A P Nicholson

Energy dispersive x-ray microanalysis (EDX) is widely used for the quantitative determination of local composition in thin film specimens. Extraction of quantitative data is usually accomplished by relating the ratio of the number of atoms of two species A and B in the volume excited by the electron beam (nA/nB) to the corresponding ratio of detected characteristic photons (NA/NB) through the use of a k-factor. This leads to an expression of the form nA/nB = kAB NA/NB where kAB is a measure of the relative efficiency with which x-rays are generated and detected from the two species.Errors in thin film x-ray quantification can arise from uncertainties in both NA/NB and kAB. In addition to the inevitable statistical errors, particularly severe problems arise in accurately determining the former if (i) mass loss occurs during spectrum acquisition so that the composition changes as irradiation proceeds, (ii) the characteristic peak from one of the minority components of interest is overlapped by the much larger peak from a majority component, (iii) the measured ratio varies significantly with specimen thickness as a result of electron channeling, or (iv) varying absorption corrections are required due to photons generated at different points having to traverse different path lengths through specimens of irregular and unknown topography on their way to the detector.


2006 ◽  
Vol 49 (1) ◽  
pp. 25-35 ◽  
Author(s):  
Mauro Missori ◽  
Marcofabio Righini

2016 ◽  
Vol 19 (4) ◽  
pp. 319-324 ◽  
Author(s):  
Blanka Ziomkowska ◽  
Tomasz Wybranowski ◽  
Michal Cyrankiewicz ◽  
Stefan Kruszewski
Keyword(s):  

Author(s):  
Aline E. Casaril ◽  
Carlos G. Santos ◽  
Bruno S. Marangoni ◽  
Sandro M. Lima ◽  
Luis H.C. Andrade ◽  
...  

2017 ◽  
Vol 1 (4) ◽  
Author(s):  
Lei Zhang ◽  
X. Fu ◽  
M. Hohage ◽  
P. Zeppenfeld ◽  
L. D. Sun

Author(s):  
Austin M. Wallace ◽  
Christine Curiac ◽  
Jared H. Delcamp ◽  
Ryan C. Fortenberry

Author(s):  
Unai Zabala ◽  
Igor Rodriguez ◽  
José María Martínez-Otzeta ◽  
Elena Lazkano

AbstractNatural gestures are a desirable feature for a humanoid robot, as they are presumed to elicit a more comfortable interaction in people. With this aim in mind, we present in this paper a system to develop a natural talking gesture generation behavior. A Generative Adversarial Network (GAN) produces novel beat gestures from the data captured from recordings of human talking. The data is obtained without the need for any kind of wearable, as a motion capture system properly estimates the position of the limbs/joints involved in human expressive talking behavior. After testing in a Pepper robot, it is shown that the system is able to generate natural gestures during large talking periods without becoming repetitive. This approach is computationally more demanding than previous work, therefore a comparison is made in order to evaluate the improvements. This comparison is made by calculating some common measures about the end effectors’ trajectories (jerk and path lengths) and complemented by the Fréchet Gesture Distance (FGD) that aims to measure the fidelity of the generated gestures with respect to the provided ones. Results show that the described system is able to learn natural gestures just by observation and improves the one developed with a simpler motion capture system. The quantitative results are sustained by questionnaire based human evaluation.


Sign in / Sign up

Export Citation Format

Share Document