Experimental and Computational Studies of CO and NO Adsorption Properties on Rh-Based Single Nanosized Catalysts

2020 ◽  
Vol 124 (5) ◽  
pp. 2953-2960
Author(s):  
Yasuhiro Matsumura ◽  
Yuki Koda ◽  
Hiroshi Yamada ◽  
Masahiko Shigetsu ◽  
Akihide Takami ◽  
...  
RSC Advances ◽  
2017 ◽  
Vol 7 (55) ◽  
pp. 34714-34721 ◽  
Author(s):  
Zhijie Liu ◽  
Yanxin Wang ◽  
Hongwei Gao

Six types of adsorption configurations, together with two different adsorption sites for NO adsorption on LaCoO3, were investigated via density functional theory.


2016 ◽  
Vol 193 ◽  
pp. 234-239 ◽  
Author(s):  
Tsuyoshi Hamaguchi ◽  
Toshiyuki Tanaka ◽  
Naoko Takahashi ◽  
Yoshihisa Tsukamoto ◽  
Nobuyuki Takagi ◽  
...  

1996 ◽  
Vol 12 (12) ◽  
pp. 1084-1089
Author(s):  
Yang Shu-Wu ◽  
◽  
Ji-Chun-Xin ◽  
Xu Jiang ◽  
Yan Wei-Hong ◽  
...  

2018 ◽  
Vol 1 (4) ◽  
pp. 41 ◽  
Author(s):  
Kervin Evans ◽  
David Compton ◽  
Michael Appell

A robust method was developed to investigate the liposomal behavior of novel enzymatically-synthesized hydroxytyrosol and tyrosol phospholipids. Bilayer characteristic obtained by this method, including bilayer formation stability and adsorption properties, were explored using dynamic light scattering, zeta-potential measurements, and quartz crystal microbalance with dissipation monitoring (QCMD), respectively. Liposome diameters were found to typically increase from pH 5.5 to pH 10. Zeta potentials values, on the other hand, were found to be well below −25 mV at all pH conditions explored, with the lowest values (and thus, the best liposome stability) at pH 5.5 or pH 10. Quartz crystal microbalance with dissipation monitoring measurements demonstrated that 100% 1,2-dioloeoylphosphatidyl-hydroxytyrosol (DOPHT) liposomes adsorbed intact onto silica in buffer conditions at pH 5.5 and with no calcium, or at pH 7.5 with calcium (no adsorption was detected at pH 10). 1,2-Dioleoylphosphatidyl-tyrosol (DOPT) liposomes were shown to adsorb intact under buffer conditions only at pH 5.5 with and without calcium. 1,2-Dioleoylphosphatidyl-2-phenolethanol (DOPPE), in comparison, readily adsorbed intact at pH 7.5 without calcium and just slightly at pH 5.5 with calcium present, but formed a supported bilayer over hours at pH 5.5 in the absence of calcium ions.


1998 ◽  
Vol 37 (8) ◽  
pp. 3375-3381 ◽  
Author(s):  
Maxwell R. Lee ◽  
Eric R. Allen ◽  
John T. Wolan ◽  
Gar B. Hoflund

2016 ◽  
Vol 60 (6-7) ◽  
pp. 492-502 ◽  
Author(s):  
M. Shipilin ◽  
E. Lundgren ◽  
J. Gustafson ◽  
C. Zhang ◽  
F. Bertram ◽  
...  

Abstract One layer thick iron oxide films are attractive from both applied and fundamental science perspectives. The structural and chemical properties of these systems can be tuned by changing the substrate, making them promising materials for heterogeneous catalysis. In the present work, we investigate the structure of FeO(111) monolayer films grown on Ag(100) and Ag(111) substrates by means of microscopy and diffraction techniques and compare it with the structure of FeO(111) grown on other substrates reported in literature. We also study the NO adsorption properties of FeO(111)/Ag(100) and FeO(111)/Ag(111) systems utilizing different spectroscopic techniques. We discuss similarities and differences in the data obtained from adsorption experiments and compare it with previous results for FeO(111)/Pt(111).


Sign in / Sign up

Export Citation Format

Share Document