Improving the Open-Circuit Voltage of Sn-Based Perovskite Solar Cells by Band Alignment at the Electron Transport Layer/Perovskite Layer Interface

2020 ◽  
Vol 12 (24) ◽  
pp. 27131-27139 ◽  
Author(s):  
Tomoyasu Yokoyama ◽  
Yu Nishitani ◽  
Yumi Miyamoto ◽  
Shohei Kusumoto ◽  
Ryusuke Uchida ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Band Alignment ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Perovskite Layer ◽  
Layer Interface

Mechanism study on enhanced open-circuit voltage of perovskite solar cells with vapor-induced TiO 2 as electron-transport layer

2017 ◽  
Vol 629 ◽  
pp. 11-16 ◽  
Author(s):  
Wenjin Zeng ◽  
Xingming Liu ◽  
Huiping Wang ◽  
Daiqi Cui ◽  
Ruidong Xia ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Mechanism Study

scholarly journals Electron transport layer driven to improve the open-circuit voltage of CH3NH3PbI3 planar perovskite solar cells

2017 ◽  
Vol 61 (1) ◽  
pp. 65-72 ◽  
Author(s):  
Xin Yao ◽  
Junhui Liang ◽  
Tiantian Li ◽  
Lin Fan ◽  
Biao Shi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer

Reveal the large open-circuit voltage deficit of all-inorganic CsPbIBr2 perovskite solar cells

2021 ◽  
Author(s):  
Ying Hu ◽  
Jiaping Wang ◽  
Peng Zhao ◽  
Zhenhua Lin ◽  
Siyu Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Perovskite Layer ◽  
Excellent Thermal Stability ◽  
Voltage Loss

Abstract Due to excellent thermal stability and optoelectronic properties, all-inorganic perovskite is one of the promising candidates to solve the thermal decomposition problem of conventional organic-inorganic hybrid perovskite solar cells (PSCs), but the larger voltage loss (V loss) cannot be ignored, especially CsPbIBr2, which limits the improvement of efficiency. To reduce the V loss, one promising solution is the modification of the energy level alignment between perovskite layer and adjacent charge transport layer (CTL), which can facilitate charge extraction and reduce carrier recombination rate at perovskite/CTL interface. Therefore, the key issues of minimum V loss and high efficiency of CsPbIBr2-based PSCs were studied in terms of the perovskite layer thickness, the effects of band offset of CTL/perovskite layer, the doping concentration of the CTL, and the electrode work function in this study based on device simulations. The open-circuit voltage (V oc) is increased from 1.37 V to 1.52 V by replacing SnO2 with ZnO as electron transport layer (ETL) due to more matching conduction band with CsPbIBr2 layer.

Doped Bilayer Tin(IV) Oxide Electron Transport Layer for High Open‐Circuit Voltage Planar Perovskite Solar Cells with Reduced Hysteresis

Small ◽  
2020 ◽  
pp. 2005671
Author(s):  
Jiajiu Ye ◽  
Yuze Li ◽  
Asma Aicha Medjahed ◽  
Stéphanie Pouget ◽  
Dmitry Aldakov ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer

scholarly journals Perovskite Solar Cells: Doped Bilayer Tin(IV) Oxide Electron Transport Layer for High Open‐Circuit Voltage Planar Perovskite Solar Cells with Reduced Hysteresis (Small 5/2021)

Small ◽  
2021 ◽  
Vol 17 (5) ◽  
pp. 2170020
Author(s):  
Jiajiu Ye ◽  
Yuze Li ◽  
Asma Aicha Medjahed ◽  
Stéphanie Pouget ◽  
Dmitry Aldakov ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer

scholarly journals Room-Temperature-Processed Amorphous Sn-In-O Electron Transport Layer for Perovskite Solar Cells

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 32 ◽  
Author(s):  
Seungtae Baek ◽  
Jeong Woo Han ◽  
Devthade Vidyasagar ◽  
Hanbyeol Cho ◽  
Hwi-Heon HA ◽  
...  
Keyword(s):  
Thin Films ◽  
Solar Cells ◽  
Electron Transport ◽  
Room Temperature ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer

We report amorphous tin-indium-oxide (TIO, Sn fraction: >50 atomic percentage (at%)) thin films as a new electron transport layer (ETL) of perovskite solar cells (PSCs). TIO thin films with Sn fraction of 52, 77, 83, 92, and 100 at% were grown on crystalline indium-tin-oxide (ITO, Sn fraction: ~10 at%) thin films, a common transparent conducting oxide, by co-sputtering In2O3 and SnO2 at room temperature. The energy band structures of the amorphous TIO thin films were determined from the optical absorbance and the ultraviolet photoelectron spectra. All the examined compositions are characterized by a conduction band edge lying between that of ITO and that of perovskite (here, methylammonium lead triiodide), indicating that TIO is a potentially viable ETL of PSCs. The photovoltaic characteristics of the TIO-based PSCs were evaluated. Owing mainly to the highest fill factor and open circuit voltage, the optimal power conversion efficiency was obtained for the 77 at%-Sn TIO ETL with TiCl4 treatment. The fill factor and the open circuit voltage changes with varying the Sn fraction, despite similar conduction band edges. We attribute these differences to the considerable changes in the electrical resistivity of the TIO ETL. This would have a significant effect on the shunt and/or the series resistances. The TIO ETL can be continuously grown on an ITO TCO in a chamber, as ITO and TIO are composed of identical elements, which would help to reduce production time and costs.

scholarly journals Efficient wide-bandgap perovskite solar cells enabled by doping a bromine-rich molecule

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Rui He ◽  
Tingting Chen ◽  
Zhipeng Xuan ◽  
Tianzhen Guo ◽  
Jincheng Luo ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Wide Bandgap ◽  
Open Circuit ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Tandem Solar Cells ◽  
Carrier Lifetimes

Abstract Wide-bandgap (wide-E g , ∼1.7 eV or higher) perovskite solar cells (PSCs) have attracted extensive attention due to the great potential of fabricating high-performance perovskite-based tandem solar cells via combining with low-bandgap absorbers, which is considered promising to exceed the Shockley–Queisser efficiency limit. However, inverted wide-E g PSCs with a minimized open-circuit voltage (V oc) loss, which are more suitable to prepare all-perovskite tandem devices, are still lacking study. Here, we report a strategy of adding 1,3,5-tris (bromomethyl) benzene (TBB) into wide-E g perovskite absorber to passivate the perovskite film, leading to an enhanced average V oc. Incorporation of TBB prolongs carrier lifetimes in wide-E g perovskite due to reduction of defects in perovskites and makes a better energy level matching between perovskite absorber and electron transport layer. As a result, we achieve the power conversion efficiency of 17.12% for our inverted TBB-doped PSC with an enhanced V oc of 1.19 V, compared with that (16.14%) for the control one (1.14 V).

scholarly journals Metal Oxide Compact Electron Transport Layer Modification for Efficient and Stable Perovskite Solar Cells

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2207 ◽  
Author(s):  
Md. Shahiduzzaman ◽  
Shoko Fukaya ◽  
Ersan Y. Muslih ◽  
Liangle Wang ◽  
Masahiro Nakano ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Metal Oxide ◽  
Perovskite Solar Cells ◽  
Clean Energy ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Future Research ◽  
Perovskite Layer ◽  
And Performance

Perovskite solar cells (PSCs) have appeared as a promising design for next-generation thin-film photovoltaics because of their cost-efficient fabrication processes and excellent optoelectronic properties. However, PSCs containing a metal oxide compact layer (CL) suffer from poor long-term stability and performance. The quality of the underlying substrate strongly influences the growth of the perovskite layer. In turn, the perovskite film quality directly affects the efficiency and stability of the resultant PSCs. Thus, substrate modification with metal oxide CLs to produce highly efficient and stable PSCs has drawn attention. In this review, metal oxide-based electron transport layers (ETLs) used in PSCs and their systemic modification are reviewed. The roles of ETLs in the design and fabrication of efficient and stable PSCs are also discussed. This review will guide the further development of perovskite films with larger grains, higher crystallinity, and more homogeneous morphology, which correlate to higher stable PSC performance. The challenges and future research directions for PSCs containing compact ETLs are also described with the goal of improving their sustainability to reach new heights of clean energy production.

Sign in / Sign up

Export Citation Format

Share Document