Boosting High Energy Density Lithium-Ion Storage via the Rational Design of an FeS-Incorporated Sulfurized Polyacrylonitrile Fiber Hybrid Cathode

2019 ◽  
Vol 11 (33) ◽  
pp. 29924-29933 ◽  
Author(s):  
Anupriya K. Haridas ◽  
Jungwon Heo ◽  
Ying Liu ◽  
Hyo-Jun Ahn ◽  
Xiaohui Zhao ◽  
...  
Keyword(s):  
Energy Density ◽  
Rational Design ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Polyacrylonitrile Fiber ◽  
Ion Storage

Manganese phosphoxide/Ni5P4 hybrids as an anode material for high energy density and rate potassium-ion storage

2021 ◽  
Author(s):  
Sen Yang ◽  
Ting Li ◽  
Yiwei Tan
Keyword(s):  
Energy Density ◽  
Lithium Ion Batteries ◽  
Large Scale ◽  
Low Cost ◽  
Lithium Ion ◽  
High Energy ◽  
Potassium Ion ◽  
High Energy Density ◽  
Active Materials ◽  
Ion Storage

Potassium-ion batteries (PIBs) that serve as low-cost and large-scale secondary batteries are regarded as promising alternatives and supplement to lithium-ion batteries. Hybrid active materials can be featured with the synergistic...

scholarly journals Dependence of Li-Ion Battery Energy Density on Separator Thickness

2021 ◽  
Author(s):  
gaolong zhu ◽  
yuyu he ◽  
yunlong deng ◽  
ming wang ◽  
xiaoyan liu ◽  
...  
Keyword(s):  
Energy Density ◽  
Lithium Ion Batteries ◽  
Rational Design ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Li Ion ◽  
Battery Energy

Abstract High energy density lithium-ion batteries are urgently needed due to the rapid growth demands of electric vehicles, electronic devices, and grid energy storage devices. There is still significant opportunity to improve the energy density of existing state-of-the-art lithium-ion batteries by optimizing the separator thickness, which is usually ignored. Here, the dependence of battery gravimetric and volumetric energy densities on separator thickness has been quantitatively discussed in different type Li-ion batteries by calculations combined with experiments. With a decrease in separator thickness, the volumetric energy density is greatly improved. Meanwhile, the gravimetric energy densities are significantly improved as the electrolyte soaking in the separator is reduced. The gravimetric and volumetric energy densities of graphite (Gr) | NCM523 cells enable to increase 11.5% and 29.7%, respectively, by reducing the thickness of separator from 25 μm to 7 μm. Furthermore, the Li | S battery exhibits an extremely high energy density of 664.2 Wh Kg-1 when the thickness of the separator is reduced to 1 μm. This work sheds fresh light on the rational design of high energy density lithium-ion batteries.

scholarly journals Titanium doped niobium oxide for stable pseudocapacitive lithium ion storage and its application in 3 V non-aqueous supercapacitors

2015 ◽  
Vol 3 (43) ◽  
pp. 21706-21712 ◽  
Author(s):  
Xu Wang ◽  
Pooi See Lee
Keyword(s):  
Energy Density ◽  
Niobium Oxide ◽  
Lithium Ion ◽  
Orthorhombic Phase ◽  
High Energy ◽  
Consumer Electronics ◽  
High Energy Density ◽  
Single Wall Carbon Nanotubes ◽  
Ion Storage ◽  
Electrode Combination

Developing high energy density supercapacitors is of great importance to the transportation, consumer electronics and micro-grid energy storage sectors. We introduce a new electrode combination with titanium-doped orthorhombic phase niobium oxide and polyaniline-single wall carbon nanotubes. The organic electrolyte based supercapacitor achieves an energy density over 110.3 Wh kg−1 at 150 W kg−1.

Triggering Phase Transition and Capacity Enhancement of Nb2O5 for Fast-Charging Lithium-ion Storage

2021 ◽  
Author(s):  
Fei Shen ◽  
Zhongti Sun ◽  
Liang Zhao ◽  
Yuanhua Xia ◽  
Yanyan Shao ◽  
...  
Keyword(s):  
Phase Transition ◽  
Energy Density ◽  
Electrode Materials ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
High Power Density ◽  
Capacity Enhancement ◽  
Fast Charging ◽  
Ion Storage

Developing high energy density and high-power density electrode materials is of great importance for lithium-ion batteries to satisfy the requirements of customer market. We report that introducing Mo into Nb2O5...

Si Nanowire Anode Prepared by Chemical Etching for High Energy Density Lithium-ion Battery

2013 ◽  
Vol 28 (11) ◽  
pp. 1207-1212 ◽  
Author(s):  
Jian-Wen LI ◽  
Ai-Jun ZHOU ◽  
Xing-Quan LIU ◽  
Jing-Ze LI
Keyword(s):  
Energy Density ◽  
Lithium Ion Battery ◽  
Chemical Etching ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Si Nanowire

scholarly journals Na0.76V6O15/Activated Carbon Hybrid Cathode for High-Performance Lithium-Ion Capacitors

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 122
Author(s):  
Renwei Lu ◽  
Xiaolong Ren ◽  
Chong Wang ◽  
Changzhen Zhan ◽  
Ding Nan ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Energy Density ◽  
Power Density ◽  
Cathode Materials ◽  
Low Cost ◽  
Lithium Ion ◽  
High Energy ◽  
Cycling Stability ◽  
High Energy Density ◽  
Artificial Graphite

Lithium-ion hybrid capacitors (LICs) are regarded as one of the most promising next generation energy storage devices. Commercial activated carbon materials with low cost and excellent cycling stability are widely used as cathode materials for LICs, however, their low energy density remains a significant challenge for the practical applications of LICs. Herein, Na0.76V6O15 nanobelts (NaVO) were prepared and combined with commercial activated carbon YP50D to form hybrid cathode materials. Credit to the synergism of its capacitive effect and diffusion-controlled faradaic effect, NaVO/C hybrid cathode displays both superior cyclability and enhanced capacity. LICs were assembled with the as-prepared NaVO/C hybrid cathode and artificial graphite anode which was pre-lithiated. Furthermore, 10-NaVO/C//AG LIC delivers a high energy density of 118.9 Wh kg−1 at a power density of 220.6 W kg−1 and retains 43.7 Wh kg−1 even at a high power density of 21,793.0 W kg−1. The LIC can also maintain long-term cycling stability with capacitance retention of approximately 70% after 5000 cycles at 1 A g−1. Accordingly, hybrid cathodes composed of commercial activated carbon and a small amount of high energy battery-type materials are expected to be a candidate for low-cost advanced LICs with both high energy density and power density.

scholarly journals Nitrogen-enriched graphene framework from a large-scale magnesiothermic conversion of CO2 with synergistic kinetics for high-power lithium-ion capacitors

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Chen Li ◽  
Xiong Zhang ◽  
Kai Wang ◽  
Xianzhong Sun ◽  
Yanan Xu ◽  
...  
Keyword(s):  
Energy Density ◽  
High Power ◽  
Power Output ◽  
Large Scale ◽  
Electrode Materials ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Chemical Doping ◽  
Lithium Ion Capacitor

AbstractLithium-ion capacitors are envisaged as promising energy-storage devices to simultaneously achieve a large energy density and high-power output at quick charge and discharge rates. However, the mismatched kinetics between capacitive cathodes and faradaic anodes still hinder their practical application for high-power purposes. To tackle this problem, the electron and ion transport of both electrodes should be substantially improved by targeted structural design and controllable chemical doping. Herein, nitrogen-enriched graphene frameworks are prepared via a large-scale and ultrafast magnesiothermic combustion synthesis using CO2 and melamine as precursors, which exhibit a crosslinked porous structure, abundant functional groups and high electrical conductivity (10524 S m−1). The material essentially delivers upgraded kinetics due to enhanced ion diffusion and electron transport. Excellent capacities of 1361 mA h g−1 and 827 mA h g−1 can be achieved at current densities of 0.1 A g−1 and 3 A g−1, respectively, demonstrating its outstanding lithium storage performance at both low and high rates. Moreover, the lithium-ion capacitor based on these nitrogen-enriched graphene frameworks displays a high energy density of 151 Wh kg−1, and still retains 86 Wh kg−1 even at an ultrahigh power output of 49 kW kg−1. This study reveals an effective pathway to achieve synergistic kinetics in carbon electrode materials for achieving high-power lithium-ion capacitors.

Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials

2021 ◽  
Author(s):  
Umair Nisar ◽  
Nitin Muralidharan ◽  
Rachid Essehli ◽  
Ruhul Amin ◽  
Ilias Belharouak
Keyword(s):  
Energy Density ◽  
Lithium Ion Battery ◽  
Cathode Materials ◽  
Lithium Ion ◽  
High Energy ◽  
Surface Coatings ◽  
High Energy Density

scholarly journals Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3586
Author(s):  
Qi An ◽  
Xingru Zhao ◽  
Shuangfu Suo ◽  
Yuzhu Bai
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Power Density ◽  
High Power ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
Cycle Life ◽  
High Energy Density ◽  
Lithium Ion Capacitor

Lithium-ion capacitors (LICs) have been widely explored for energy storage. Nevertheless, achieving good energy density, satisfactory power density, and stable cycle life is still challenging. For this study, we fabricated a novel LIC with a NiO-rGO composite as a negative material and commercial activated carbon (AC) as a positive material for energy storage. The NiO-rGO//AC system utilizes NiO nanoparticles uniformly distributed in rGO to achieve a high specific capacity (with a current density of 0.5 A g−1 and a charge capacity of 945.8 mA h g−1) and uses AC to provide a large specific surface area and adjustable pore structure, thereby achieving excellent electrochemical performance. In detail, the NiO-rGO//AC system (with a mass ratio of 1:3) can achieve a high energy density (98.15 W h kg−1), a high power density (10.94 kW kg−1), and a long cycle life (with 72.1% capacity retention after 10,000 cycles). This study outlines a new option for the manufacture of LIC devices that feature both high energy and high power densities.

Sign in / Sign up

Export Citation Format

Share Document