Porous Alumina Protective Coatings on Palladium Nanoparticles by Self-Poisoned Atomic Layer Deposition

2012 ◽  
Vol 24 (11) ◽  
pp. 2047-2055 ◽  
Author(s):  
Junling Lu ◽  
Bin Liu ◽  
Jeffrey P. Greeley ◽  
Zhenxing Feng ◽  
Joseph A. Libera ◽  
...  
Author(s):  
Shane O'Donnell ◽  
Feljin Jose ◽  
Kyle Shiel ◽  
Matthew Snelgrove ◽  
Caitlin McFeely ◽  
...  

Abstract Due to its low cost and suitable band gap, silicon has been studied as a photoanode material for some time. However, as a result of poor stability during the oxygen evolution reaction (OER), Si still remains unsuitable for any extended use. Ultra-thin titanium dioxide (TiO2) films have been used as protective coatings and are shown to enhance Si photoanode lifetime with added solar to hydrogen (STH) performance improvements through distancing the oxidation reaction away from the Si photoanode surface and improved charge transport through the anode. This study details the nucleation, growth chemistry, and performance of TiO2 thin films prepared via thermal and plasma enhanced atomic layer deposition (ALD) using both titanium isopropoxide (TTIP) and Tetrakis(dimethylamido)titanium (TDMAT) as the precursor material. The effect of post ALD treatments of plasma and air annealing was also studied. Films were investigated using photoelectrochemical cell testing to evaluate photoelectrochemical performance, and in-vacuum cycle-by-cycle x-ray photoelectron spectroscopy (XPS) was used as the primary characterisation technique to study nucleation mechanisms and film properties contributing to improvements in cell performance. TiO2 grown by plasma enhanced ALD results in cleaner films with reduced carbon incorporation. However, despite increased carbon incorporation, thermally grown films showed improved photocurrent as a result of oxygen vacancies in these films. Post deposition annealing in a H2 ambient is shown to further improve photocurrent in all cases, while annealing in atmosphere leads to uniform film chemistry and enhanced photocurrent stability in all cases.


2020 ◽  
Vol 28 (11) ◽  
pp. 15753
Author(s):  
Pavel Bulkin ◽  
Sofia Gaiaschi ◽  
Patrick Chapon ◽  
Dmitri Daineka ◽  
Natalya Kundikova

RSC Advances ◽  
2016 ◽  
Vol 6 (16) ◽  
pp. 13207-13216 ◽  
Author(s):  
Yiwu Jiang ◽  
Jinwei Chen ◽  
Jie Zhang ◽  
Anqi Li ◽  
Yaping Zeng ◽  
...  

Ultralow loading palladium nanoparticles were facilely synthesized on a three-dimensional graphite-coated nickel foam support by metal atomic layer deposition technology and used as a promising catalyst for ethanol electro-oxidation reaction.


Author(s):  
Dongsheng Guan ◽  
Chris Yuan

The poor cyclability problem of SnS2 anodes in Li-ion batteries (LIB) is tackled for the first time by surface coatings with TiO2 via atomic layer deposition (ALD). ALD is capable to achieve uniform, conformal nanoscale coatings onto entire SnS2 electrodes, and enhance their cycling stability and rate performance. From our study, we found that the bare electrode delivers capacities eventually down to 219.2 mA h g−1 over 50 cycles, while the ALD TiO2-coated gains a final capacity of 323.7 mA h g−1 (47.7% higher). Electrochemical impedance analyses reveal that the improvement is ascribed to the smaller charge transfer resistance and formation of thinner solid–electrolyte interfaces (SEI) in the coated electrode, thanks to its better structural integrity and less electrolyte decomposition in the presence of protective coatings.


2019 ◽  
Vol 1 (10) ◽  
pp. 4082-4089 ◽  
Author(s):  
Fuat Topuz ◽  
Tamer Uyar

The production of a Pd nanoparticle-decorated electrospun poly-cyclodextrin nanoweb by atomic layer deposition for its use in the reduction of nitroaromatics.


2016 ◽  
Vol 368 ◽  
pp. 470-476 ◽  
Author(s):  
Maria Berdova ◽  
Claudia Wiemer ◽  
Alessio Lamperti ◽  
Grazia Tallarida ◽  
Elena Cianci ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document