Diverse Pathways for the Palladium(II)-Mediated Oxidation of Olefins bytert-Butylhydroperoxide

2002 ◽  
Vol 4 (16) ◽  
pp. 2727-2730 ◽  
Author(s):  
Jin-Quan Yu ◽  
E. J. Corey
2002 ◽  
Vol 153 (1-3) ◽  
pp. 55-65 ◽  
Author(s):  
Lakshmi S Kaanumalle ◽  
J Shailaja ◽  
Rebecca J Robbins ◽  
V Ramamurthy

Tetrahedron ◽  
2000 ◽  
Vol 56 (36) ◽  
pp. 6927-6943 ◽  
Author(s):  
J. Shailaja ◽  
J. Sivaguru ◽  
Rebecca J. Robbins ◽  
V. Ramamurthy ◽  
R.B. Sunoj ◽  
...  

ChemInform ◽  
2000 ◽  
Vol 31 (49) ◽  
pp. no-no
Author(s):  
J. Shailaja ◽  
J. Sivaguru ◽  
Rebecca J. Robbins ◽  
V. Ramamurthy ◽  
R. B. Sunoj ◽  
...  

2019 ◽  
Vol 821 ◽  
pp. 89-95
Author(s):  
Wanasorn Somphol ◽  
Thipjak Na Lampang ◽  
Paweena Prapainainar ◽  
Pongdhorn Sae-Oui ◽  
Surapich Loykulnant ◽  
...  

Poly (lactic acid) or PLA was reinforced by nanocellulose and polyethylene glycol (PEG), which were introduced into PLA matrix from 0 to 3 wt.% to enhance compatibility and strength of the PLA. The nanocellulose was prepared by TEMPO-mediated oxidation from microcrystalline cellulose (MCC) powder and characterized by TEM, AFM, and XRD to reveal rod-like shaped nanocellulose with nanosized dimensions, high aspect ratio and high crystallinity. Films of nanocellulose/PEG/PLA nanocomposites were prepared by solvent casting method to evaluate the mechanical performance. It was found that the addition of PEG in nanocellulose-containing PLA films resulted in an increase in tensile modulus with only 1 wt% of PEG, where higher PEG concentrations negatively impacted the tensile strength. Furthermore, the tensile strength and modulus of nanocellulose/PEG/PLA nanocomposites were higher than the PLA/PEG composites due to the existence of nanocellulose chains. Visual traces of crazing were detailed to describe the deformation mechanism.


Physchem ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 163-175
Author(s):  
Philipp Hawe ◽  
Vitor R. R. Silveira ◽  
Robert Bericat Vadell ◽  
Erik Lewin ◽  
Jacinto Sá

More sustainable solutions are needed to produce chemicals and fuels, mainly to face rising demands and mitigate climate change. Light, as a reagent, has emerged as a route to activate small molecules, e.g., H2O, CO2, N2, and make complex chemicals in a process called photocatalysis. Several photosystems have been proposed, with plasmonic technology emerging as one the most promising technologies due to its high optical absorption and hot-carrier formation. However, the lifetime of hot carriers is unsuitable for direct use; therefore, they are normally coupled with suitable charge-accepting materials, such as semiconductors. Herein, a system is reported consisting of Au supported in p-Cu2O. The combination of p-Cu2O intrinsic photoactivity with the plasmonic properties of Au extended the system’s optical absorption range, increasing photocatalytic efficiency. More importantly, the system enabled us to study the underlying processes responsible for hot-hole transfer to p-Cu2O. Based on photocatalytic studies, it was concluded that most of the holes involved in aniline photo-oxidation come from hot-carrier injections, not from the PIRET process.


Sign in / Sign up

Export Citation Format

Share Document