On the determination of self-consistent strain rate fields within zones of distributed continental deformation

Author(s):  
William E. Holt ◽  
Bingming Shen-Tu ◽  
John Haines ◽  
James Jackson
1972 ◽  
Vol 48 ◽  
pp. 101-103
Author(s):  
R. J. Anderle

Locations of Doppler satellite observing stations have been revised to obtain a set which is more self-consistent and more consistent with the CIO pole. Residuals of satellite observations for 1970 have been analyzed using the new coordinates to determine mean and standard errors for five days of observations of latitude versus station, time of day, and elevation angle. The accuracy of the determination of latitude is about 4 meters at moderate and high elevation angles. But since more satellite passes occur at lower elevation angles, the accuracy of determination of a component of position based on five days of observation of one satellite is only about 2 meters.


2016 ◽  
Vol 716 ◽  
pp. 114-120 ◽  
Author(s):  
Sebastian Mróz ◽  
Piotr Szota ◽  
Teresa Bajor ◽  
Andrzej Stefanik

The paper presents the results of physical modelling of the plastic deformation of the Mg/Al bimetallic specimens using the Gleeble 3800 simulator. The plastic deformation of Mg/Al bimetal specimens characterized by the diameter to thickness ratio equal to 1 was tested in compression tests. The aim of this work was determination of the range of parameters as temperature and strain rate that mainly influence on the plastic deformation of Mg/Al bars during metal forming processes. The tests were carried out for temperature range from 300 to 400°C for different strain rate values. The stock was round 22.5 mm-diameter with an Al layer share of 28% Mg/Al bars that had been produced using the explosive welding method. Based on the analysis of the obtained testing results it has been found that one of the main process parameters influencing the plastic deformation the bimetal components is the initial stock temperature and strain rate values.


2004 ◽  
Vol 08 (11) ◽  
pp. 1311-1324 ◽  
Author(s):  
Maddalena Pizzotti ◽  
Elisabetta Annoni ◽  
Renato Ugo ◽  
Silvia Bruni ◽  
Silvio Quici ◽  
...  

A multitechnique investigation of the determination of the order of magnitude of the second and third order NLO response of [5-[(4-dimethylaminophenyl)ethynyl]-15-[(4-nitrophenyl)ethynyl]-10,20-diphenylporphyrinato]nickel(II) (1) is reported with the aim to produce self consistent evidence for a significant NLO response of this kind of push-pull porphyrin chromophore. The experimental multitechnique approach is based on the EFISH technique, working with a non-resonant incident wavelength of 1.907 μm, on the solvatochromic method and finally on a vibrational method, avoiding any fluorescence or resonance interference. A theoretical MNDO-TDHF evaluation of the zero-frequency quadratic and cubic hyperpolarizabilities of an ab initio optimized planar structure is also reported. The order of magnitude of the quadratic hyperpolarizability of (1) at zero frequency (β0), was found to be significantly lower than that reported for the corresponding Cu (II) or Zn (II) complexes with the same push-pull porphyrin chromophore.


Sign in / Sign up

Export Citation Format

Share Document