scholarly journals Transition from light diffusion to localization in three-dimensional amorphous dielectric networks near the band edge

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jakub Haberko ◽  
Luis S. Froufe-Pérez ◽  
Frank Scheffold

Abstract Localization of light is the photon analog of electron localization in disordered lattices, for whose discovery Anderson received the Nobel prize in 1977. The question about its existence in open three-dimensional materials has eluded an experimental and full theoretical verification for decades. Here we study numerically electromagnetic vector wave transmittance through realistic digital representations of hyperuniform dielectric networks, a new class of highly correlated but disordered photonic band gap materials. We identify the evanescent decay of the transmitted power in the gap and diffusive transport far from the gap. Near the gap, we find that transport sets off diffusive but, with increasing slab thickness, crosses over gradually to a faster decay, signaling localization. We show that we can describe the transition to localization at the mobility edge using the self-consistent theory of localization based on the concept of a position-dependent diffusion coefficient.

1999 ◽  
Vol 60 (7) ◽  
pp. 4426-4429 ◽  
Author(s):  
M. M. Sigalas ◽  
R. Biswas ◽  
K. M. Ho ◽  
C. M. Soukoulis ◽  
D. D. Crouch

2007 ◽  
Vol 280-283 ◽  
pp. 533-536
Author(s):  
Hai Qing Yin ◽  
Soshu Kirihara ◽  
Yoshinari Miyamoto

The three-dimensional (3D) photonic band gap material is a material that there exists a full photonic band gap in which waves are forbidden to propagate whatever the polarization or the direction of propagation. In order to obtain photonic bandgap in lower range, we focus on the fabrication of PBG materials of diamond structure with TiO2 powder mixed with SiO2. The inverse epoxy structure with periodic diamond lattices in millimeter order has been fabricated by stereolithographic rapid prototyping. TiO2 slurry was filled into the epoxy structure and then cold isostatic pressing was applied. After sintering at 700K for 5hrs, the epoxy was burnt out and the designed structure was maintained perfectly. The calculated band diagram shows that there exists an absolute photonic band gap for all wave vectors. The measurement of transmission from 10 to 20 GHz in <100> direction shows that a complete band gap is formed at about 14.7-18.5 GHz. The magnitude of the maximum attenuation is as large as 30 dB at 17 GHz.


1998 ◽  
Vol 07 (02) ◽  
pp. 181-200 ◽  
Author(s):  
S. G. Romanov

Different experimental strategies towards the 3-dimensional photonic crystals operating at optical wavelength are classified. The detailed discussion is devoted to the recent progress in photonic crystals fabricated by template method — the photonic band gap materials on the base of opal. The control of photonic properties of opal-based gratings is achieved through impregnating the opal with high refractive index semiconductors and dielectrics. Experimental study demonstrated the dependence of the stop band behaviour upon the type of impregnation (complete or partial) and showed a way for approaching complete photonic band gap. The photoluminescence from opal- semiconductor gratings revealed suppression of spontaneous emission in the gap region with following enhancement of the emission efficiency at the low-energy edge of the gap.


2000 ◽  
Vol 55 (5-6) ◽  
pp. 207-215
Author(s):  
Gregory Poilasne ◽  
P. Pouliguen ◽  
K. Mahdjoubi ◽  
Laurent Desclos ◽  
Philippe Gélin ◽  
...  

Author(s):  
Michael D. Tocci ◽  
Mark J. Bloemer ◽  
Michael Scalora ◽  
Charles M. Bowden ◽  
Jonathan P. Dowling

2019 ◽  
Vol 116 (47) ◽  
pp. 23480-23486 ◽  
Author(s):  
Michael A. Klatt ◽  
Paul J. Steinhardt ◽  
Salvatore Torquato

We show that it is possible to construct foam-based heterostructures with complete photonic band gaps. Three-dimensional foams are promising candidates for the self-organization of large photonic networks with combinations of physical characteristics that may be useful for applications. The largest band gap found is based on 3D Weaire–Phelan foam, a structure that was originally introduced as a solution to the Kelvin problem of finding the 3D tessellation composed of equal-volume cells that has the least surface area. The photonic band gap has a maximal size of 16.9% (at a volume fraction of 21.6% for a dielectric contrast ε=13) and a high degree of isotropy, properties that are advantageous in designing photonic waveguides and circuits. We also present results for 2 other foam-based heterostructures based on Kelvin and C15 foams that have somewhat smaller but still significant band gaps.


2003 ◽  
Vol 18 (9) ◽  
pp. 2214-2220 ◽  
Author(s):  
Shingo Kanehira ◽  
Soshu Kirihara ◽  
Yoshinari Miyamoto ◽  
Kazuaki Sakoda ◽  
Mitsuo Wada Takeda

Three-dimensional photonic crystals with a diamond structure, which are composed of the TiO2-based ceramic particles dispersed in an epoxy lattice, were fabricated by stereolithography. The diamond structure showed a photonic band gap in the 14.3–17.0 GHz range along the Γ-K 〈110〉 direction, which is close to the band calculation using the plain wave expansion method. Two types of lattice defects—air cavity and dielectric cavity—were introduced into the diamond structure by removing a unit cell of diamond structure or inserting a block of the lattice medium into the air cavity. The transmission of millimeter waves affected by multiple reflections at the defects was measured in the photonic band gap. Resonant frequencies in the defects were calculated and compared with the measurement results.


2001 ◽  
Vol 692 ◽  
Author(s):  
Eiichi Kuramochi ◽  
Masaya Notomi ◽  
Itaru Yokohama ◽  
Jun-ichi Takahashi ◽  
Chiharu Takahashi ◽  
...  

AbstractWe propose a new three-dimensional photonic crystal structure or drilled alternating-layer photonic crystal (DALPC), which can be fabricated by a combination of the deposition of alternating layers of dielectric films and one-time dry etching. Our band calculation predicts that the DALPC has a photonic band gap (PBG) in all directions. We fabricated a Si/SiO2DALPC by electron beam lithography, bias sputtering, and fluoride-gas electron cyclotron resonance etching. We measured the light transmission of the DALPC sample in both the in-plane and vertical directions. We observed a transmission minimum around the 1.4-μm-wavelength for all measured directions and TE/TM polarizations, which demonstrated a potential of the DALPC as a three-dimensional PBG material.


Sign in / Sign up

Export Citation Format

Share Document