scholarly journals The MRI-based 3D morphologic changes of knee meniscus under knee weight-bearing and early flexion conditions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tong Liu ◽  
Xianyue Shen ◽  
Qingming Ji ◽  
Jianlin Xiao ◽  
Jianlin Zuo ◽  
...  

AbstractThere are few studies investigate morphologic changes of knee meniscus in vivo mechanical loading and three-dimensions (3D) deformation and displacement of the whole meniscus between in vivo mechanical loading and unloading conditions are still unclear. To investigate the displacements and 3D morphological changes of the menisci under knee weight-bearing and early flexion conditions in healthy adults using a Magnetic Resonance Imaging (MRI)-compatible loading device (a 3.0 T MR imaging system) combined with a newly developed 3D comparison technique. Fifteen healthy volunteers were recruited in this cross-sectional observational study. Each subject underwent MRIs of their dominant right knee in eight different scanning conditions using a 3.0-T MRI scanner with a custom-made MRI-compatible loading device. The knee meniscus images were 3D reconstructed, and dimensional comparisons were made for each meniscal model with baseline (0°-unloaded model). The morphologic changes of the meniscal-anterior horn (AH), body (BD), and posterior horn (PH) regions were expressed as mean positive and negative deviations. The displacements were further investigated, and the meniscal extrusions of different subregions were measured. The morphologic changing patterns of human meniscus under loading and flexions were presented using 3D chromatic maps. The bilateral menisci were generally shifting laterally and posteriorly in most flexion angles and were changing medially and anteriorly under fully extended knee loading conditions. The mean deviations were more significant with loading at 0° of knee flexion, while the PH region in the lateral side changed further posteriorly with loading in 30° flexion. Most of the differences were not significant in other flexion angles between loading conditions. The extrusion of meniscus’s medial body was greater in full extension compared to any other flexing angles. Mechanical loading can significantly deform the menisci in knee extension; however, this effect is limited during knee flexion. Current study can be used as a reference for the evaluations of the integrity in meniscal functions.

2005 ◽  
Vol 23 (2) ◽  
pp. 340-344 ◽  
Author(s):  
Guoan Li ◽  
Louis E. DeFrate ◽  
Harry E. Rubash ◽  
Thomas J. Gill

2012 ◽  
Vol 30 (10) ◽  
pp. 1596-1603 ◽  
Author(s):  
Koichi Kobayashi ◽  
Makoto Sakamoto ◽  
Ali Hosseini ◽  
Harry E. Rubash ◽  
Guoan Li

2013 ◽  
Author(s):  
Thomas Franz ◽  
Michael Hamman de Vaal ◽  
James Neville ◽  
Jacques Scherman ◽  
Micah Litow ◽  
...  

Author(s):  
Chadd W. Clary ◽  
Amit M. Mane ◽  
Amber N. Reeve ◽  
Kevin A. Dodd ◽  
Lorin P. Maletsky

Understanding the behavior of the natural knee in deep flexion can offer insight into the necessary design characteristics of a total knee implant. Andriacchi et al. [1] measured the in vivo characteristics of knee motion down to ∼150° knee flexion during a weight bearing squat. Likewise, Li et al. [2] investigated deep knee flexion in vitro using robotic technology during passive knee flexion. Both of these studies offer insight into the behavior of the knee in deep knee flexion; however, they have some limitations with regards to assessing physiological activities in a controlled manner. The purpose of this study was to measure the kinematics of the knee during a simulated in vitro deep knee squat so that in the future a dynamic, load-bearing, simulated deep knee squat could be used as a tool in the design of total knee prostheses.


2010 ◽  
Vol 132 (6) ◽  
Author(s):  
Kartik M. Varadarajan ◽  
Andrew A. Freiberg ◽  
Thomas J. Gill ◽  
Harry E. Rubash ◽  
Guoan Li

It is widely recognized that the tracking of patella is strongly influenced by the geometry of the trochlear groove. Nonetheless, quantitative baseline data regarding correlation between the three-dimensional geometry of the trochlear groove and patellar tracking under in vivo weight-bearing conditions are not available. A combined magnetic resonance and dual fluoroscopic imaging technique, coupled with multivariate regression analysis, was used to quantify the relationship between trochlear groove geometry (sulcus location, bisector angle, and coronal plane angle) and in vivo patellar tracking (shift, tilt, and rotation) during weight-bearing knee flexion. The results showed that in the transverse plane, patellar shift was strongly correlated (correlation coefficient R=0.86, p<0.001) to mediolateral location of the trochlear sulcus (raw regression coefficient βraw=0.62) and the trochlear bisector angle (βraw=0.31). Similarly, patellar tilt showed a significant association with the trochlear bisector angle (R=0.45, p<0.001, and βraw=0.60). However, in the coronal plane patellar rotation was poorly correlated with its matching geometric parameter, namely, the coronal plane angle of the trochlea (R=0.26, p=0.01, βraw=0.08). The geometry of the trochlear groove in the transverse plane of the femur had significant effect on the transverse plane motion of the patella (patellar shift and tilt) under in vivo weight-bearing conditions. However, patellar rotation in the coronal plane was weakly correlated with the trochlear geometry.


2013 ◽  
Vol 29 (10) ◽  
pp. 1653-1660 ◽  
Author(s):  
Sebastien Lustig ◽  
Corey J. Scholes ◽  
Jean-Christian Balestro ◽  
David A. Parker

2015 ◽  
Vol 9 (4) ◽  
Author(s):  
Tadashi Kimura ◽  
Makoto Kubota ◽  
Tetsuya Taguchi ◽  
Naoki Suzuki ◽  
Asaki Hattori ◽  
...  

To describe a loading device, we created for use with current computed tomography (CT) scanners and to evaluate its ability to reproduce loading conditions. Ten feet of five healthy volunteers (three men and two women) with no history of foot or ankle disorders and no foot pain were studied. Subjects lay on the device in the supine position with the legs extended and ankles in a neutral position. An axial load equivalent to their body weight was applied to the soles. A foot scan measured plantar contact area, plantar pressure, and the center of pressure under standing and weight-bearing conditions. Differences between measurements were assessed using the paired t test with a two-sided significance of 5%. No subjects complained of pain or discomfort during loading. Weight-bearing measurements varied from standing measurements as follows: plantar contact area, −4.15 cm2; contact % (forefoot/midfoot/hindfoot), −0.61%/−0.17%/0.79%; plantar pressure, −1.47 N/cm2/−0.49 N/cm2/3.7 N/cm2 (6.40 N/cm2 overall); and center of pressure location (anterior–posterior/medial–lateral), 0.88%/0.36%. With the numbers available, no significant difference could be detected for any tested items. We were able to produce load distributions and intensities resembling standing conditions. Thus, the standing condition can be well produced on CT images if our device is used. Furthermore, images can be compared with those of healthy individuals to yield useful information for elucidating the pathophysiology and pathology of foot disorders.


Sign in / Sign up

Export Citation Format

Share Document