Inductively tuned modified split ring resonator based quad band epsilon negative (ENG) with near zero index (NZI) metamaterial for multiband antenna performance enhancement

AbstractAn inductively tuned modified split-ring resonator-based metamaterial (MTM) is presented in this article that provides multiple resonances covering S, C, X, and Ku-bands. The MTM is designed on an FR-4 substrate with a thickness of 1.5 mm and an electrical dimension of 0.063λ × 0.063λ where wavelength, λ is calculated at 2.38 GHz. The resonator part is a combination of three squared copper rings and one circular ring in which all the square rings are modified shaped, and the inner two rings are interconnected. The resonance frequency is tuned by adding inductive metal strips in parallel two vertical splits of the outer ring that causes a significant shift of resonances towards the lower frequencies and a highly effective medium ratio (EMR) of 15.75. Numerical simulation software CST microwave studio is used for the simulation and performance analysis of the proposed unit cell. The MTM unit cell exhibits six resonances of transmission coefficient (S21) at 2.38, 4.24, 5.98, 9.55, 12.1, and 14.34 GHz covering S, C, X, and Ku-bands with epsilon negative (ENG), near-zero permeability, and near-zero refractive index (NZI). The simulated result is validated by experiment with good agreement between them. The performance of the array of the unit cells is also investigated in both simulation and measurement. The equivalent circuit modeling has been accomplished using Advanced Design Software (ADS) that shows a similar S21 response compared to CST simulation. Noteworthy to mention that with the copper backplane, the same unit cell provides multiband absorption properties with four major absorption peaks of 99.6%, 95.7%, 99.9%, 92.7% with quality factors(Q-factor) of 28.4, 34.4, 23, and 32 at 3.98, 5.5, 11.73 and 13.47 GHz, respectively which can be applied for sensing and detecting purposes. The application of an array of the unit cells is investigated using it as a superstrate of an antenna that provides a 73% (average) increase of antenna gain. Due to its simple design, compact dimension with high EMR, ENG property with near-zero permeability, this multiband NZI metamaterial can be used for microwave applications, especially for multiband antenna gain enhancement.

Download Full-text

A Hybrid Approach on Metamaterial-Loaded Fractal Antenna Design

Applied Computational Electromagnetics Society ◽

10.47037/2020.aces.j.350907 ◽

2020 ◽

Vol 35 (9) ◽

pp. 1022-1029

Author(s):

Dudla Prabhakar ◽

C. Rajendra Babu ◽

V. Adinarayana ◽

V. Prasad

Keyword(s):

Microstrip Line ◽

Ring Resonator ◽

Structural Parameters ◽

Hybrid Approach ◽

Split Ring Resonator ◽

Unit Cell ◽

Dual Band ◽

Fractal Antenna ◽

Split Ring ◽

Unit Cells

The paper provides the interoperable hybrid Grasshopper–Grey Wolf optimization (GHGWO) of the Square Split-Ring Resonator (SRR) metamaterial unit cell. This paper discusses the complex phase strategies of the electric and magnetic interplay of the charged microstrip line of the split ring resonator (SRR). Optimized unit of metamaterial cells for their bandwidth enhancement is packed into a new square fractal antenna. In the interim period of dual band efficiency, a new design is introduced for a microstrip line-feeding square fractal antenna with a faulty ground composition. In the second stage, a quasi-static SRR model is being used to streamline its structural parameters in an effort to reinforce the bandwidth so that optimized composition resonates at the required intensity area. In the GHGWO hybrid algorithm, SRR unit cell size limitations should be optimized and the convergence actions of the algorithm improved. Certain evolutions termed modified hybrid BF-PSO classical BFO, chaos PSO and IWO are being tested for efficiency of the Hybrid GHGWO algorithm. In the final stage, optimized SRR unit cells are stacked into a square fractal antenna that provides bandwidth output suited to wireless usages with upper and lower band. The prototype square fractal antenna without and with SRR unit cells is efficiently evaluated by trial results.

Download Full-text

A Multiband Antenna Stacked with Novel Metamaterial SCSRR and CSSRR for WiMAX/WLAN Applications

Micromachines ◽

10.3390/mi12020113 ◽

2021 ◽

Vol 12 (2) ◽

pp. 113

Author(s):

Rajiv Mohan David ◽

Mohammad Saadh AW ◽

Tanweer Ali ◽

Pradeep Kumar

Keyword(s):

Split Ring Resonator ◽

Unit Cell ◽

Ring Resonators ◽

Split Ring ◽

Medium Theory ◽

High Frequency Structure Simulator ◽

Dimension Analysis ◽

Unit Cells ◽

Coaxial Feed ◽

Triple Band

This paper presents an innovative method for the design of a triple band meta-mode antenna. This unique design of antenna finds application in a particular frequency band of WLAN and WiMAX. This antenna comprises of a square complimentary split ring resonator (SCSRR), a coaxial feed, and two symmetrical comb shaped split ring resonators (CSSRR). The metamaterial unit cell SCSRR independently gains control in the band range 3.15–3.25 GHz (WiMAX), whereas two symmetrical CSSRR unit cell controls the band in the ranges 3.91–4.01 GHz and 5.79–5.94 GHz (WLAN). This design methodology and the study of the suggested unit cells structure are reviewed in classical waveguide medium theory. The antenna has a miniaturized size of only 0.213λ0 × 0.192λ0 × 0.0271λ0 (20 × 18 × 2.54 mm3, where λ0 is the free space wavelength at 3.2 GHz). The detailed dimension analysis of the proposed antenna and its radiation efficiency are also presented in this paper. All the necessary simulations are carried out in High Frequency Structure Simulator (HFSS) 13.0 tool.

Download Full-text