Electromagnetic torque prediction and harmonic reduction of interior permanent magnet synchronous motor for electric vehicles using an analytical method

Interior permanent magnet synchronous motors (IPMSMs) have been widely used as drive machines in electric vehicles (EVs) due to their high torque density. However, the torque ripple of IPMSMs will result in severe noise and vibration. This paper proposes a new analytical method for electromagnetic torque prediction and harmonic reduction of IPMSM. On the basis of dq theory, an analytical model of electromagnetic torque is firstly established by taking the permanent magnet flux harmonics and the cross-coupling effect into consideration. And the specific sources and orders of torque harmonics are also determined. Then, the torque-angle characteristics are further studied. In particular, the permanent magnet (PM) torque and the reluctance torque are separated and quantitatively analyzed via the proposed analytical model. Finally, a theoretical method of reducing the specific order torque harmonic by PM shifting is derived and proposed from the perspective of avoiding resonance. The accuracy and effectiveness of the proposed analytical method are verified by finite-element analysis. The results show that the proposed analytical model is accurate enough to predict the electromagnetic torque performance of IPMSM. Moreover, the electromagnetic torque harmonics with specific orders can be effectively reduced by shifting the PM to an appropriate angle.

Performance Evaluation of Harmonic Reduced Non-Overlap Winding Wound Rotor Synchronous Machine

The analysis and performance evaluation of a harmonic reduction strategy of a non-overlap winding wound rotor synchronous machine is conducted in this paper. The harmonic reduction strategy utilizes phase-shifts between coil currents to reduce sub- and higher-order harmonics. The design is performed on a 3 MW wound rotor synchronous machine with a 16/18 pole/slot combination. The application results in a lowered torque ripple and an increased efficiency of the designed machine. The manufacturing and testing of a 3 kW prototype to ascertain the effectiveness of the design is also presented. The practical measurements correlate successfully with the theoretical results.

Novel step-down topologies of star-connected autotransformer

Purpose This paper aims to obtain a symmetrical step-down topology with lower equivalent capacity and wider step-down range under the condition of the same output. Two new symmetrical step-down topologies of star-connected autotransformers are proposed in this paper. Taking the equivalent capacity as the main parameter, the obtained topologies are modeled and analyzed in detail. Design/methodology/approach This paper adopts the research methods of design, modeling, analysis and simulation verification. First, the star-connected autotransformer is redesigned according to the design objective of symmetrical step-down topology. In addition, the mathematical model of two topologies is established and a detailed theoretical analysis is carried out. Finally, the theoretical results are verified by simulation. Findings Two symmetrical star-connected autotransformer step-down topologies are designed, the winding configurations of the corresponding topology are presented, the step-down ranges of these three topologies are calculated and the influence of step-down ratio on the equivalent capacity of autotransformer are analyzed. Through analysis, the target step-down topologies are obtained when the step-down ratio is [1.1, 5.4] and [1.1, 1.9] respectively. Research limitations/implications Because the selected research object is only a star-connected autotransformer, the research results may lack generality. Therefore, researchers are encouraged to further study the topologies of other autotransformers. Practical implications This paper includes the implications of the step-down ratio on the equivalent capacity of autotransformers and the configuration of transformer windings. Originality/value The topologies designed in this paper enable star-connected autotransformer in the 12-pulse rectifier to be applied in step-down circumstances rather than situations of harmonic reduction only. At the same time, this paper provides a way that can be used to redesign the autotransformer in other multi-pulse rectifier systems, so that those transformers can be used in voltage regulation.

Control Strategy of 1 kV Hybrid Active Power Filter for Mining Applications

The paper presents a shunt hybrid active power filter for 1 kV mining applications in configuration with a single-tuned passive filter. The focus is on the method of controlling the filter, with particular emphasis on the influence of network voltage distortion and time delays in control on the effectiveness of harmonic reduction, which is one of the most important aspect of power quality. The low-power loss configuration of a hybrid filter with SiC transistors is shown, as well as the control algorithm which limits the influence of voltage distortion. Theoretical considerations are verified by results obtained from simulations and tests of the hybrid active power filter prototype.