Facile one-step mechanochemical synthesis of [Cu(tu)]Cl·1/2H2O nanobelts for high-performance supercapacitor

RSC Advances ◽  
2015 ◽  
Vol 5 (48) ◽  
pp. 38527-38532 ◽  
Author(s):  
Di Guo ◽  
Hongxu Guo ◽  
Yingchang Ke ◽  
Dongfang Wang ◽  
Jianhua Chen ◽  
...  

A facile one-step mechanochemical process from CuCl2·2H2O and thiourea to fabricate novel [Cu(tu)]Cl·1/2H2O nanobelts has been observed for the first time, and the nanobelts were used as an electrode material for a supercapacitor.

Author(s):  
Shiying Lin ◽  
Lanlan Mo ◽  
Feijun Wang

Abstract A facile and environmentally friendly approach to produce self-doped hierachically porous carbon as electrode material for high-performance supercapacitor was demonstrated. 3D honeycomb-like hierarchically porous carbon was successfully obtained by one-step carbonization and activation of sodium carboxymethyl cellulose (CMC) via K2CO3. With the optimized temperature of carbonization and activation, the porous carbon material achieved well-shaped hierarchically pores (micro-, meso and macropores) like a honeycomb, ultrahigh specific surface area (1666 m2·g-1), as well as highly O-self-doping (3.6 at.%), endowing an excellent electrochemical properties for the electrode in three-electrode system. The porous carbon electrode material delivered a high specific capacitance of 300.8 F·g-1 at 1 A·g-1, an eminent rate capability of 228.4 F·g-1 at the current density up to 20 A·g-1 and outstanding cycle stability of 94.3% retention after 10000 cycles. Therefore, the CMC derived hierarchical porous carbon activated by K2CO3 would have promising foreground in application of supercapacitors.


RSC Advances ◽  
2014 ◽  
Vol 4 (66) ◽  
pp. 34739-34750 ◽  
Author(s):  
Alfin Kurniawan ◽  
L. K. Ong ◽  
Fredi Kurniawan ◽  
C. X. Lin ◽  
Felycia E. Soetaredjo ◽  
...  

For the first time, porous carbon microfibers co-doped with N/P/K were synthesized from cane molasses by combination of electrospinning and carbonization techniques and its electrochemical application to electrode materials for supercapacitors was investigated.


RSC Advances ◽  
2014 ◽  
Vol 4 (39) ◽  
pp. 20234-20238 ◽  
Author(s):  
Zhenyu Wang ◽  
Yuefei Zhang ◽  
Yonghe Li ◽  
Haoyu Fu

A novel hierarchical porous NiCo2O4 nanograss array directly grown on Ni foam has been constructed via a simple one-step hydrothermal method combined with a calcination treatment, and possessed high electrochemical performance.


2019 ◽  
Vol 48 (28) ◽  
pp. 10652-10660 ◽  
Author(s):  
Tarugu Anitha ◽  
Araveeti Eswar Reddy ◽  
Yedluri Anil Kumar ◽  
Young-Rae Cho ◽  
Hee-Je Kim

A bunch of PbMoO4/CdMoO4 nanocube-like structures exhibit superior specific capacitance and cycling stability to PbMoO4 and CdMoO4 electrodes.


2017 ◽  
Vol 5 (16) ◽  
pp. 7474-7481 ◽  
Author(s):  
Fan Zhang ◽  
Yuanyuan Bao ◽  
Shuangshuang Ma ◽  
Lu Liu ◽  
Xin Shi

For the first time, hierarchical flower-like nickel phenylphosphonate microspheres were synthesized and applied as a high performance electrode material for pseudocapacitors.


2015 ◽  
Vol 3 (21) ◽  
pp. 11199-11202 ◽  
Author(s):  
Ning Lin ◽  
Liangbiao Wang ◽  
Jianbin Zhou ◽  
Jie Zhou ◽  
Ying Han ◽  
...  

High-performance Si/Ge anodes are prepared through a one-step solid-state metathesis reaction between Mg2Si and GeO2 for the first time.


2020 ◽  
Vol 9 (3) ◽  
pp. 1389-1394

The one-step synthesis of high-quality graphene derivatives via CVD process has gained considerable importance nowadays for high-performance electronics and sensors. However, the use of harsh chemicals, high temperature, sensitivity, and the problem of separation of graphene from the substrate, motivated the one-step synthesis of graphene from a non-graphitic precursor, bypassing the use of graphite. In this paper, we have reported for the first time, the synthesis of graphene nanosheets from sugarcane bagasse at the normal atmospheric condition in a single step, avoiding the formation of GO. Here, the pyrolysis of sugarcane bagasse was carried out in the temperature range of 250-450o C in the presence of sodium hydroxide. The results suggested that even the low temperature (250–450o C) facilitated the development of graphitic planes via condensation and aromatization of the glucose monomers present in the precursor. The XRD pattern showed 2θ at around 25o in each case, which confirmed the formation of graphene instead of GO. The FESEM, TEM, and EDX analysis proved the formation of few-layer nanosheets of graphene from carbon-rich waste precursors in a single step.


2020 ◽  
Vol 49 (3) ◽  
pp. 941-941
Author(s):  
Tarugu Anitha ◽  
Araveeti Eswar Reddy ◽  
Yedluri Anil Kumar ◽  
Young-Rae Cho ◽  
Hee-Je Kim

Correction for ‘One-step synthesis and electrochemical performance of a PbMoO4/CdMoO4 composite as an electrode material for high-performance supercapacitor applications’ by Tarugu Anitha et al., Dalton Trans., 2019, 48, 10652–10660.


2020 ◽  
Vol 27 ◽  
pp. 101148 ◽  
Author(s):  
Kummara Venkata Guru Raghavendra ◽  
Chandu V.V. Muralee Gopi ◽  
Rajangam Vinodh ◽  
Ikkurthi Kanaka Durga ◽  
Hee-Je Kim

Sign in / Sign up

Export Citation Format

Share Document